Hello,My router is a OpenBSD 4.5 stable box and serves internet connection
for a lab with 20 machines.
The problem is internet connection from the lab or from the gateway are too
slow, downloads in average 7KB/s.
Downloading the same files with a Mac OS X box and Linux, the mimimum I get
is 400KB/s.
There
are no blocks specific in the network for my gateway, the above tests
were made spofing mac address and using the same IP address of the
gateway.
Follow information about my machine:
bash-3.2# vmstat -c 10
procs memory page disks traps cpu
r b w avm fre flt re pi po fr sr wd0 cd0 int sys cs us sy
id
3 1 0 302276 84964 114 0 0 0 0 1 6 0 306 1808 107 1 8
90
2 1 0 302336 84648 64 0 0 0 0 0 31 0 833 2738 421 2 23
75
0 1 0 302372 84564 39 0 0 0 0 0 8 0 639 2938 428 2 7
91
1 1 0 302372 84548 8 0 0 0 0 0 0 0 379 1701 271 1 4
95
0 1 0 302372 84452 11 0 0 0 0 0 8 0 1220 2748 447 2 9
89
2 1 0 302372 84388 8 0 0 0 0 0 6 0 443 3458 502 4 7
89
0 1 0 306300 77884 2689 0 0 0 0 0 0 0 321 2978 269 1 14
85
0 1 0 309336 72684 2020 0 0 0 0 0 2 0 563 3140 283 1 19
80
0 1 0 309476 72312 395 0 0 0 0 0 14 0 770 2350 307 2 28
70
1 1 0 309560 71972 54 0 0 0 0 0 22 0 654 2316 309 3 48
50
bash-3.2# pfctl -si
Status: Enabled for 2 days 16:04:13 Debug: Urgent
State Table Total Rate
current entries 1383
searches 71600836 310.4/s
inserts 1473307 6.4/s
removals 1471924 6.4/s
Counters
match 1723327 7.5/s
bad-offset 0 0.0/s
fragment 0 0.0/s
short 0 0.0/s
normalize 0 0.0/s
memory 0 0.0/s
bad-timestamp 0 0.0/s
congestion 0 0.0/s
ip-option 0 0.0/s
proto-cksum 0 0.0/s
state-mismatch 476 0.0/s
state-insert 136 0.0/s
state-limit 0 0.0/s
src-limit 0 0.0/s
synproxy 0 0.0/s
netstat -m
1538 mbufs in use:
125 mbufs allocated to data
1407 mbufs allocated to packet headers
6 mbufs allocated to socket names and addresses
120/2194/128000 mbuf 2048 byte clusters in use (current/peak/max)
0/8/128000 mbuf 4096 byte clusters in use (current/peak/max)
0/8/128000 mbuf 8192 byte clusters in use (current/peak/max)
0/8/128000 mbuf 9216 byte clusters in use (current/peak/max)
0/8/128000 mbuf 12288 byte clusters in use (current/peak/max)
0/8/128000 mbuf 16384 byte clusters in use (current/peak/max)
0/8/128000 mbuf 65536 byte clusters in use (current/peak/max)
5580 Kbytes allocated to network (11% in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines
DMESG:
oll(D11e507c,2710,d04d58d8,d11e10ac,28) at ahci_poll+0x33
ahci_ata_cmd(d11e507c,1,0,$\^P967a48,d0202de9) aT ahci_ata_cmd+0x85
ada_exec(d11eaf00,d11e50'c\^L6,d11db4#8,451) at ata_exec+0x17
!tascsi_atap)_cmd(d5\^H91000,0,d0967ac8,d04d457E) at a4ascsi]atapi_cmd+0xbc
scSi_execute_xs($5890000$d5891019,\^V,d11d37\^X0,d11e5000) at
scsi_execute_xs+0x50
scs)_scsi_cld(d11d3780,d0967b20,6,0,0) at scsiOscsi_cmd+0xa0
scsi_test_unit_readq(d11d3780,5,1c3,d1!`3800) at
scsi_tast_uni4Wready+0x#9\^Hscsa_probeder(d1!c64c0,1,0,5) at
scsi_probedev+0x3a3
scsi_probe_target(d11c66c0\^L1(5,d10a!270,d07a8c58) at
scsi_probe_target+0X1a
scsi_probe_bus(d11c66c0,d11c66c0,d0966c98,`11d6800,d06f039a) at
scsi_probe_bus+0x2e
config_attach(d11d6800,d079e49a,d0967c98,d04b09e0,80) at config_attach+0xfd
atascsiOattach($11d6800,d0967ce0,d1 a1620) at atascsi_atta#h+0hbd
ahci_pci_attach(d1195400,d11d6800,d0967d70,d1195$00,d07b6a24) at
ahci_pci_aTtach+0x167
config_attach(d1185400,d079e7fc,d0927d7 ,d04c5d04) at config_attach+0xfd
pci_probE_device(d1195400,80009000,0,0,0) at pci_probe_device+0x15a
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3600+ ("AuthenticAMD" 686-class, 256KB L2
cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16
real mem = 467984384 (446MB)
avail mem = 444092416 (423MB)
User Kernel Config
UKC> disable ahci
63 ahci* disabled
64 ahci* disabled
UKC>
UKC> q
Unknown command, try help
UKC> q
Unknown command, try help
UKC> e\^H \^Hquit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/25/07, BIOS32 rev. 0 @ 0xea130,
SMBIOS rev. 2.4 @ 0xed7e0 (66 entries)
bios0: vendor Hewlett-Packard version "786E3 v02.10" date 01/25/2007
bios0: Hewlett-Packard HP Compaq dc5750 Microtower
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC
acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) IGFX(S4) PCX1(S4)
PCX2(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) EUS1(S3)
PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 1 (IGFX)
acpiprt3 at acpi0: bus -1 (PCX1)
acpiprt4 at acpi0: bus 63 (PCX2)
acpiprt5 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 0xd0000/0x1c00 0xd1c00/0x800
0xd2400/0x800 0xe7600/0x8a00!
cpu0: PowerNow! K8 1996 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x5874 (class display subclass miscellaneous,
rev 0x00) at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 7 function 0 "ATI RX480 PCIE" rev 0x00
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5755" rev 0x02, BCM5755 A2
(0xa002): apic 1 int 19 (irq 5), address 00:1b:78:a1:a4:15
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
pciide0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 1 int 22 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST380815AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD D DH16DYS, XH31> ATAPI 5/cdrom
removable
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int 16 (irq
11), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int 17 (irq
11), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 1 int 18 (irq
5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int 17 (irq
11), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int 18 (irq
5), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x53: 512MB DDR2 SDRAM non-parity PC2-5300CL5
pciide1: using apic 1 int 16 (irq 11) for native-PCI interrupt
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1 int
16 (irq 11)
azalia0: codecs: Realtek ALC260
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 7
xl0 at pci3 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: apic 1 int
20 (irq 10), address 00:01:02:be:e6:e3
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 4
xl1 at pci3 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: apic 1 int
21 (irq 11), address 00:01:03:29:7c:99
bmtphy1 at xl1 phy 24: 3C905C internal PHY, rev. 4
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
DH-F2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: /mnt was not properly unmounted
arp info overwritten for 192.168.1.13 by 00:04:76:10:fb:fa on xl0
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
duplicate IP address 172.20.82.10 sent from ethernet address
00:16:3e:12:61:bc
arp info overwritten for 172.20.82.20 by 00:16:3e:60:b6:0e on bge0
arp info overwritten for 192.168.1.6 by 00:c0:ca:14:b6:0a on xl0
arp info overwritten for 192.168.1.6 by 00:b0:d0:c2:71:12 on xl0
arp info overwritten for 192.168.1.6 by 00:c0:ca:14:b6:0a on xl0
arp info overwritten for 192.168.1.6 by 00:b0:d0:c2:71:12 on xl0
arp info overwritten for 192.168.1.6 by 00:c0:ca:14:b6:0a on xl0
arp info overwritten for 192.168.1.6 by 00:b0:d0:c2:71:12 on xl0
arp info overwritten for 192.168.1.6 by 00:c0:ca:14:b6:0a on xl0
arp info overwritten for 192.168.1.6 by 00:b0:d0:c2:71:12 on xl0
arp info overwritten for 192.168.1.6 by 00:c0:ca:14:b6:0a on xl0
arp info overwritten for 192.168.1.6 by 00:b0:d0:c2:71:12 on xl0
arp info overwritten for 192.168.1.6 by 00:c0:ca:14:b6:0a on xl0
arp info overwritten for 192.168.1.6 by 00:b0:d0:c2:71:12 on xl0
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
syncing disks... t 0h5
OpenBSD 4.5-stable (ncd) #0: Mon Aug 10 15:37:51 BRT 2009
r...@jaspion.ncd.ufes.br:/usr/src/sys/arch/i386/compile/ncd
cpu0: AMD Sempron(tm) Processor 3600+ ("AuthenticAMD" 686-class, 256KB L2
cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16
real mem = 467984384 (446MB)
avail mem = 444362752 (423MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/25/07, BIOS32 rev. 0 @ 0xea130,
SMBIOS rev. 2.4 @ 0xed7e0 (66 entries)
bios0: vendor Hewlett-Packard version "786E3 v02.10" date 01/25/2007
bios0: Hewlett-Packard HP Compaq dc5750 Microtower
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC
acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) IGFX(S4) PCX1(S4)
PCX2(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) EUS1(S3)
PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 1 (IGFX)
acpiprt3 at acpi0: bus -1 (PCX1)
acpiprt4 at acpi0: bus 63 (PCX2)
acpiprt5 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 0xd0000/0x1c00 0xd1c00/0x800
0xd2400/0x800 0xe7600/0x8a00!
cpu0: PowerNow! K8 1996 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x5874 (class display subclass miscellaneous,
rev 0x00) at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 7 function 0 "ATI RX480 PCIE" rev 0x00
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5755" rev 0x02, BCM5755 A2
(0xa002): apic 1 int 19 (irq 5), address 00:1b:78:a1:a4:15
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
pciide0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 1 int 22 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST380815AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD D DH16DYS, XH31> ATAPI 5/cdrom
removable
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int 16 (irq
11), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int 17 (irq
11), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 1 int 18 (irq
5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int 17 (irq
11), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int 18 (irq
5), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x53: 512MB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 16 (irq 11) for native-PCI interrupt
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1 int
16 (irq 11)
azalia0: codecs: Realtek ALC260
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 7
xl0 at pci3 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: apic 1 int
20 (irq 10), address 00:01:02:be:e6:e3
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 4
xl1 at pci3 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: apic 1 int
21 (irq 11), address 00:01:03:29:7c:99
bmtphy1 at xl1 phy 24: 3C905C internal PHY, rev. 4
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
DH-F2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
arp: attempt to overwrite entry for 192.168.1.4 on xl0 by 00:22:43:0c:a0:52
on bge0
arp: attempt to overwrite entry for 192.168.1.4 on xl0 by 00:22:43:0c:a0:52
on bge0
arp: attempt to overwrite entry for 192.168.1.4 on xl0 by 00:22:43:0c:a0:52
on bge0
arp: attempt to overwrite entry for 192.168.1.4 on xl0 by 00:22:43:0c:a0:52
on bge0
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
arp info overwritten for 192.168.2.2 by 00:b0:d0:b6:1c:fe on xl1
arp info overwritten for 192.168.2.2 by 00:08:54:20:ce:70 on xl1
arp info overwritten for 192.168.2.2 by 00:b0:d0:b6:1c:fe on xl1
arp info overwritten for 192.168.2.2 by 00:08:54:20:ce:70 on xl1
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
Should I need increase any kernel values?
Thanks in advance
--
Knoseeker
