In case this helps, I will attach my complete dmesg.
OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
real mem = 2137165824 (2038MB)
avail mem = 2058231808 (1962MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/15/07, BIOS32 rev. 0 @
0xffa10, SMBIOS rev. 2.4 @ 0xf7190 (45 entries)
bios0: vendor Dell Inc. version "A02" date 08/15/2007
bios0: Dell Inc. Inspiron 1420
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT
acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0)
USB4(S0) USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S3)
RP03(S3) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) MBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus 13 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus 9 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpitz0 at acpi0: critical temperature 87 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL PR6937" serial 24 type LION oem "Sanyo"
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0613092b06000613
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1500, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2
int 20 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2
int 21 (irq 9)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2
int 22 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02:
apic 2 int 21 (irq 9)
azalia0: codecs: Sigmatel STAC9228X, Conexant/0x2c06, using Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2
int 16 (irq 0)
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2
int 17 (irq 0)
pci2 at ppb1 bus 12
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 2 int 17 (irq 10), MoW1, address 00:18:de:be:50:48
ppb2 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2
int 19 (irq 0)
pci3 at ppb2 bus 13
ppb3 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 2
int 17 (irq 0)
pci4 at ppb3 bus 9
bge0 at pci4 dev 0 function 0 "Broadcom BCM5906M" rev 0x02, BCM5906 A2
(0xc002): apic 2 int 17 (irq 10), address 00:1c:23:f8:62:90
brgphy0 at bge0 phy 1: BCM5906 10/100baseTX PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2
int 20 (irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2
int 21 (irq 9)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2
int 22 (irq 7)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2
int 20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci5 at ppb4 bus 3
"Ricoh 5C832 Firewire" rev 0x05 at pci5 dev 1 function 0 not configured
sdhc0 at pci5 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2
int 18 (irq 4)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci5 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci5 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci5 dev 1 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CDRWDVD CRX880A, KD09> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x02: apic 2
int 17 (irq 10), AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHY2160B, 0085> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic
2 int 17 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Microsoft
Microsoft Wireless Optical Mouse\M-. 1.00" rev 2.00/0.07 addr 2
uhidev0: iclass 3/1, 23 report ids
ums0 at uhidev0 reportid 17: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 20: input=1, output=0, feature=0
uhid3 at uhidev0 reportid 21: input=3, output=0, feature=0
uhid4 at uhidev0 reportid 23: input=0, output=0, feature=1
Luis Useche
use...@gmail.com
On Wed, Jul 22, 2009 at 10:49 PM, Luis Useche<use...@gmail.com> wrote:
> On Wed, Jul 22, 2009 at 9:51 PM, Hendrickson,
> Kenneth<khend...@harris.com> wrote:
>> turn on wsmouse in /etc/rc.conf.local
>>
>> read /etc/rc.conf (but don't modify it) to see what it does
>
> I'm sorry I didn't mention it. The wsmoused is working and, in fact,
> my touchpad is perfectly fine for both: console and X. Another
> suggestion?
>
> Luis Useche
> use...@gmail.com
