On Wed, Jul 08, 2009 at 01:55:52PM +0200, h...@stare.cz wrote: > Before I buy http://download.asm.cz/inshop/prod/barebone/3V700A.pdf > I want to make sure that the components are supported by OpenBSD, > where "supported" means it works under 4.5 or current. > Both success stories and failure stories are welcome. > > The CPU is VIA Eden V4, which I understand is a variant of C3/C7, > and is therefore supported, right? VIA cpus works like a charm. I have C3 and C7.
> Now, http://openbsd.org/i386.html#hardware does not specifically mention > the VIA CN700 chipset - is someone using it successfully? Yes, OK. See dmesg below. Mine comes from http://www.mini-itx.com/store/?c=27#m73g For the other components, no idea. OpenBSD 4.5-current (GENERIC) #57: Fri Jun 12 14:46:47 MDT 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA Esther processor 1000MHz ("CentaurHauls" 686-class) 1 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2 real mem = 1038643200 (990MB) avail mem = 995885056 (949MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/14/07, BIOS32 rev. 0 @ 0xf9ed0, SMBIOS rev. 2.3 @ 0xf0000 (30 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/14/2007 apm at bios0 function 0x15 not configured acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC acpi0: wakeup devices SLPB(S5) PCI0(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) LAN0(S5) AC97(S5) UAR1(S5) UAR2(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: RNG AES AES-CTR SHA1 SHA256 RSA cpu0: apic clock running at 99MHz ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature 75 degC acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x8000! 0xd8000/0x2800 cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 998 MHz: speeds: 1000, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 viaagp0 at pchb0: v3 agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq 11), address 00:1b:b9:99:f2:13 rlphy0 at rl0 phy 0: RTL internal PHY pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA pciide0: using apic 2 int 20 (irq 11) for native-PCI interrupt pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility pciide1: channel 0 disabled (no drives) pciide1: channel 1 disabled (no drives) uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 10) uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 10) uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 11) uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 11) ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: apic 2 int 22 (irq 5) ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auvia0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8716F rev 1, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/43.01 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 softraid0 at root PXE boot MAC address 00:1b:b9:99:f2:13, interface rl0 nfs_boot: using interface rl0, with revarp & bootparams nfs_boot: client_addr=192.168.1.3 nfs_boot: server_addr=192.168.1.2 hostname=esther root on c3:/home/esther nfs_boot: bootparam get swap: 60 WARNING: no swap swapmount: no device -- Olivier Cherrier mailto:o...@symacx.com
