On Mon, Jun 29, 2009 at 9:01 PM, Matthew Dempsky<matt...@dempsky.org> wrote:
> On my desktop, whenever I press the Caps Lock key while using X, all
> USB input is lagged for about a second. The Caps Lock light on my
> keyboard does not change state until after this second, and all other
> subsequent key presses and/or mouse movements are not registered until
> after either.
>
> XXXxxXXXXxXX
(Sorry, I unintentionally sent that message while testing the behavior.)
So I can also press (e.g.) Caps Lock, x, x, x, Caps Lock, x, x, x,
repeated several times within a second, and the result is the light
blinks on and off once a second, and then finally all of the key input
is registered.
Below is my dmesg, and a copy of my xorg.conf, in case they help.
This is under a fairly recent 4.6-beta snapshot.
Thanks.
OpenBSD 4.6-beta (GENERIC.MP) #55: Sat Jun 27 18:53:57 MDT 2009
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3180863488 (3033MB)
avail mem = 3072126976 (2929MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe8590 (56 entries)
bios0: vendor Intel Corp. version "IDG4510H.86A.0101.2009.0526.1006"
date 05/26/2009
bios0: Intel Corporation DG45ID
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG ASF! HPET
acpi0: wakeup devices P0P1(S3) UAR1(S3) UAR3(S5) P0P2(S3) USB0(S3)
USB1(S3) USB2(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3) PEX0(S4)
PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) GBE_(S4) USB5(S3) PWRB(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000.12 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C
X16,xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 333MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2999.66 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C
X16,xTPR,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus -1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus -1 (PEX4)
acpicpu0 at acpi0:, C3, C2, C1, PSS
acpicpu1 at acpi0:, C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2999 MHz: speeds: 2997, 1998 MHz
pci0 at mainbus0 bus 0
extent `pciio' (0x0 - 0xffffffff), flags=0
0xd000 - 0xe143
0xe150 - 0xe157
0xe160 - 0xe163
0xe170 - 0xe177
0xe180 - 0xe183
0xe190 - 0xe197
0xe1a0 - 0xe1a3
0xe1b0 - 0xe1b7
0xe1c0 - 0xe1c7
0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x9ffff
0xe0000 - 0xbdcfffff
0xc0000000 - 0xd062610f
0xfed1c000 - 0xfed1ffff
0xff000000 - 0xffffffff
pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel G45 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 0 int 16 (irq 11)
drm0 at inteldrm0
"Intel G45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x2e24 (class communications subclass
miscellaneous, rev 0x03) at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH10 R BM LF" rev 0x00: apic 0
int 20 (irq 10), address 00:1c:c0:9b:9f:f0
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0
int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0
int 21 (irq 3)
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0
int 18 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0
int 18 (irq 11)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00:
apic 0 int 22 (irq 10)
azalia0: codecs: IDT 92HD73E1, Intel/0x2803, using IDT 92HD73E1
audio0 at azalia0
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0
int 23 (irq 3)
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0
int 19 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0
int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0
int 23 (irq 3)
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci1 at ppb0 bus 1
extent `ppb0 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0xd0ff
0xe000 - 0xffffffff
extent `ppb0 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xd04fffff
0xd0520000 - 0xd05214ff
0xd0600000 - 0xffffffff
dc0 at pci1 dev 0 function 0 "ADMtek AN983" rev 0x11: apic 0 int 21
(irq 3), address 00:08:a1:c0:30:54
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000749, model 0x0001
"AT&T/Lucent FW322 1394" rev 0x70 at pci1 dev 1 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: apic 0
int 19 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD7500AACS-0, 01.0> SCSI3 0/direct
fixed
sd0: 715404MB, 512 bytes/sec, 1465149168 sec total
cd0 at scsibus0 targ 3 lun 0: <HL-DT-ST, DVD-RAM GH22LS30, 1.01> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic
0 int 18 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 0 int 19 (irq 11) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
uhub8 at uhub0 port 5 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Primax
Electronics Dynex 5-Button Wired Optical Mouse" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub8 port 2 configuration 1 interface 0 "Plus More
Enterprise LTD. USB-compliant keyboard" rev 1.10/1.00 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub8 port 2 configuration 1 interface 1 "Plus More
Enterprise LTD. USB-compliant keyboard" rev 1.10/1.00 addr 4
uhidev2: iclass 3/1, 3 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
ums1 at uhidev2 reportid 3: 0 button, Z dir
wsmouse1 at ums1 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
wsmouse0 detached
ums0 detached
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
wsmouse1 detached
ums1 detached
uhidev2 detached
uhub8 detached
uhub8 at uhub0 port 5 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Primax
Electronics Dynex 5-Button Wired Optical Mouse" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub8 port 2 configuration 1 interface 0 "Plus More
Enterprise LTD. USB-compliant keyboard" rev 1.10/1.00 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub8 port 2 configuration 1 interface 1 "Plus More
Enterprise LTD. USB-compliant keyboard" rev 1.10/1.00 addr 4
uhidev2: iclass 3/1, 3 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
ums1 at uhidev2 reportid 3: 0 button, Z dir
wsmouse1 at ums1 mux 0
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/local/lib/X11/fonts/mscorefonts/"
FontPath "/usr/local/lib/X11/fonts/ghostscript/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "glx"
# Load "record"
# Load "xtrap"
Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel"
BoardName "G45 Video"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
