* Alexander Hall on Wed, Jun 17, 2009 at 10:40:58AM +0200: > What is your network setup?
The network setup is rather simple: | lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33160 | priority: 0 | groups: lo | inet 127.0.0.1 netmask 0xff000000 | inet6 ::1 prefixlen 128 | inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 | em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 | lladdr 00:0f:fe:de:59:49 | priority: 0 | groups: egress | media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause) | status: active | inet6 fe80::20f:feff:fede:5949%em0 prefixlen 64 scopeid 0x1 | inet 10.13.130.58 netmask 0xffffff00 broadcast 10.13.130.255 | inet6 2001:1418:16b:0:20f:feff:fede:5949 prefixlen 64 autoconf pltime 604684 vltime 2591884 | enc0: flags=0<> mtu 1536 | priority: 0 Just em0, which is connected to the LAN and gets all of its configuration via DHCP and rtsol. > any special kernel config? I have activated RAIDframe; other than that, the kernel is "pure" (see config file below). | include "arch/amd64/conf/GENERIC.MP" | pseudo-device raid | option RAID_AUTOCONFIG The system I have been testing this with is almost bare; other than vim and zsh there is next to nothing on it. > dmesg too. | OpenBSD 4.5 (GENERIC.RAID) #0: Mon May 18 10:55:01 CEST 2009 | r...@kriegspire.rg-me.schule.suedtirol.it:/usr/src/sys/arch/amd64/compile/GENERIC.RAID | real mem = 2098917376 (2001MB) | avail mem = 2025533440 (1931MB) | mainbus0 at root | bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xea0c0 (77 entries) | bios0: vendor Hewlett-Packard version "786F1 v01.26" date 07/31/2008 | bios0: Hewlett-Packard HP Compaq dc7800p Convertible Minitower | acpi0 at bios0: rev 0 | acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR | acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) EUS1(S3) EUS2(S3) PBTN(S4) | acpitimer0 at acpi0: 3579545 Hz, 24 bits | acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat | cpu0 at mainbus0: apid 0 (boot processor) | cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.89 MHz | cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG | cpu0: 6MB 64b/line 16-way L2 cache | cpu0: apic clock running at 332MHz | cpu1 at mainbus0: apid 1 (application processor) | cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.50 MHz | cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG | cpu1: 6MB 64b/line 16-way L2 cache | ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins | ioapic0: misconfigured as apic 0, remapped to apid 1 | acpihpet0 at acpi0: 14318179 Hz | acpiprt0 at acpi0: bus 0 (PCI0) | acpiprt1 at acpi0: bus -1 (PEG1) | acpiprt2 at acpi0: bus -1 (PEG2) | acpiprt3 at acpi0: bus 32 (PCX1) | acpiprt4 at acpi0: bus 48 (PCX2) | acpiprt5 at acpi0: bus -1 (PCX5) | acpiprt6 at acpi0: bus -1 (PCX6) | acpiprt7 at acpi0: bus 7 (HUB_) | acpicpu0 at acpi0: C2 | acpicpu1 at acpi0: C2 | acpibtn0 at acpi0: PBTN | cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a092206000922 | cpu0: using only highest and lowest power states | cpu0: Enhanced SpeedStep 3000 MHz (1244 mV): speeds: 3000, 2000 MHz | pci0 at mainbus0 bus 0: configuration mode 1 | pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02 | vga1 at pci0 dev 2 function 0 "Intel 82Q35 Video" rev 0x02 | wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) | wsdisplay0: screen 1-5 added (80x25, vt100 emulation) | intagp0 at vga1 | agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 | inteldrm0 at vga1: apic 1 int 16 (irq 5) | drm0 at inteldrm0 | "Intel 82Q35 Video" rev 0x02 at pci0 dev 2 function 1 not configured | "Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured | pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI | pciide0: using apic 1 int 18 (irq 10) for native-PCI interrupt | pciide0: channel 0 ignored (not responding; disabled or no drives?) | pciide0: channel 1 ignored (not responding; disabled or no drives?) | "Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured | em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 1 int 19 (irq 5), address 00:0f:fe:de:59:49 | uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 1 int 20 (irq 10) | uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 1 int 21 (irq 11) | ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 1 int 22 (irq 5) | usb0 at ehci0: USB revision 2.0 | uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 | azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 1 int 21 (irq 11) | azalia0: codecs: Analog Devices AD1884 | audio0 at azalia0 | ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02 | pci1 at ppb0 bus 32 | ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 1 int 21 (irq 11) | pci2 at ppb1 bus 48 | uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 1 int 20 (irq 10) | uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 1 int 21 (irq 11) | uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 1 int 22 (irq 5) | ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 1 int 20 (irq 10) | usb1 at ehci1: USB revision 2.0 | uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 | ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 | pci3 at ppb2 bus 7 | pcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02 | pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI | pciide1: using apic 1 int 18 (irq 10) for native-PCI interrupt | wd0 at pciide1 channel 0 drive 0: <ST3250310AS> | wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors | wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 | atapiscsi0 at pciide1 channel 1 drive 0 | scsibus0 at atapiscsi0: 2 targets | cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD A DH16A3L, 8H3D> ATAPI 5/cdrom removable | cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 | pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI | pciide2: using apic 1 int 18 (irq 10) for native-PCI interrupt | wd1 at pciide2 channel 0 drive 0: <WDC WD2500AAJS-60B4A0> | wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors | wd1(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 | usb2 at uhci0: USB revision 1.0 | uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 | usb3 at uhci1: USB revision 1.0 | uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 | usb4 at uhci2: USB revision 1.0 | uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 | usb5 at uhci3: USB revision 1.0 | uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 | usb6 at uhci4: USB revision 1.0 | uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 | isa0 at pcib0 | isadma0 at isa0 | com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo | pckbc0 at isa0 port 0x60/5 | pckbd0 at pckbc0 (kbd slot) | pckbc0: using irq 1 for kbd slot | wskbd0 at pckbd0: console keyboard, using wsdisplay0 | pcppi0 at isa0 port 0x61 | midi0 at pcppi0: <PC speaker> | spkr0 at pcppi0 | lpt0 at isa0 port 0x378/4 irq 7 | fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 | mtrr: Pentium Pro MTRR support | Kernelized RAIDframe activated | umass0 at uhub0 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/11.22 addr 2 | umass0: using SCSI over Bulk-Only | scsibus1 at umass0: 2 targets, initiator 0 | sd0 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 0/direct removable | sd0: drive offline | sd1 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 0/direct removable | sd1: drive offline | sd2 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable | sd2: drive offline | sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct removable | sd3: drive offline | uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 2 | uhidev0: iclass 3/1 | ums0 at uhidev0: 3 buttons, Z dir | wsmouse0 at ums0 mux 0 | cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 | SENSE KEY: Not Ready | ASC/ASCQ: Medium Not Present - Tray Closed | raid0 at root: (RAID Level 1) total number of sectors is 486597760 (237596 MB) as root | softraid0 at root | softraid0: wd0d can not read metadata version 1207959552, expected 3 | softraid0: wd1d can not read metadata version 1936942435, expected 3 | root on raid0a | swapmount: no device
