merlyn wrote:
Hi all,
I'm trying to play music CD-ROM on my Lenovo ThinkPad SL400 with OpenBSD 4.5,
but unsuccessfully. It seems to play, but no sound sounds.
I've tried cdio and kscd.
Mixerctl inputs.cd.* isn't here.
CD is ok, I have tried it in the cd player.
Thanks for any help,
Milan Bartos
I've had the same problem for a long time now. Started a good while back
after a certain -current.
Don't remember which, was months ago. Suddenly noticed one day that cdio
play didn't work anymore.
Had no idea about cdio cdplay. That really solves my problem, almost
good enough, but it would be better to understand problem, I don't think
its a hardware problem.
$ mixerctl -va
outputs.master=255,255 volume
outputs.master.mute=off [ off on ]
outputs.mono=255 volume
outputs.mono.mute=on [ off on ]
outputs.mono.source=mixerout [ mixerout mic ]
outputs.hp=255,255 volume
outputs.hp.mute=off [ off on ]
inputs.spkr=255 volume
inputs.spkr.mute=off [ off on ]
inputs.phone=191 volume
inputs.phone.mute=off [ off on ]
inputs.mic=191 volume
inputs.mic.mute=off [ off on ]
inputs.mic.preamp=off [ off on ]
inputs.mic.source=mic0 [ mic0 mic1 ]
inputs.line=191,191 volume
inputs.line.mute=off [ off on ]
inputs.cd=191,191 volume
inputs.cd.mute=off [ off on ]
inputs.video=191,191 volume
inputs.video.mute=off [ off on ]
inputs.aux=191,191 volume
inputs.aux.mute=off [ off on ]
inputs.dac=191,191 volume
inputs.dac.mute=off [ off on ]
record.source=mic [ mic cd video aux line mixero
ut mixeroutmono phone ]
record.volume=255,255 volume
record.volume.mute=off [ off on ]
outputs.spatial=off [ off on ]
outputs.spatial.center=0 volume
outputs.spatial.depth=0 volume
outputs.extamp=off [ off on ]
outputs.spdif=off [ off on ]
$ audioctl
name=Audigy2
version=0x04
config=emuxki
encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,mmap,independent
full_duplex=1
fullduplex=1
blocksize=8192
hiwat=2
lowat=1
output_muted=0
monitor_gain=0
mode=play,record
play.rate=44100
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=255
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=16384
play.samples=176898048
play.eof=0
play.pause=0
play.error=1
play.waiting=0
play.open=1
play.active=1
play.buffer_size=65536
play.block_size=8192
play.errors=2048
record.rate=44100
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=191
record.balance=32
record.port=0x1
record.avail_ports=0x7
record.seek=0
record.samples=176906240
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=1
record.active=1
record.buffer_size=65536
record.block_size=8192
record.errors=0
$ dmesg
OpenBSD 4.5-current (GENERIC) #133: Tue May 5 21:30:15 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 899 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536375296 (511MB)
avail mem = 510324736 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/19/01, BIOS32 rev. 0 @ 0xfb0c0,
SMBIOS rev. 2.3 @ 0xf0800 (38 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
12/19/2001
bios0: LEGEND.QDI(R) SynactiX5EP
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb540
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
extent `pciio' (0x0 - 0xffffffff), flags=0
0xa000 - 0xd01f
0xd800 - 0xd81f
0xf000 - 0xf00f
0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x9ffff
0xf0000 - 0x1fffffff
0xd0000000 - 0xe8ffffff
0xffb00000 - 0xffffffff
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x2400000
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
pci1 at ppb0 bus 1
extent `ppb0 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0xc0ff
0xd000 - 0xffffffff
extent `ppb0 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xe3ffffff
0xe5000000 - 0xe501ffff
0xe6000000 - 0xffffffff
vga1 at pci1 dev 0 function 0 "ATI Radeon 9500/9700" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 5
drm0 at radeondrm0
"ATI Radeon 9500/9700 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x05
pci2 at ppb1 bus 2
extent `ppb1 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0xb03f
0xb400 - 0xb407
0xc000 - 0xffffffff
extent `ppb1 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xe80047ff
0xe9000000 - 0xffffffff
ppb2 at pci2 dev 11 function 0 "IBM 82351 PCI-PCI" rev 0x01
pci3 at ppb2 bus 3
extent `ppb2 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0xa00f
0xa400 - 0xa40f
0xb000 - 0xffffffff
extent `ppb2 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xe5ffffff
0xe7000000 - 0xe700000f
0xe7001000 - 0xe700100f
0xe8000000 - 0xffffffff
tl0 at pci3 dev 0 function 0 "Compaq DP Netelligent 10/100TX" rev 0x10:
irq 11 address 00:08:c7:5d:a2:8f
nsphy0 at tl0 phy 1: DP83840 10/100 PHY, rev. 1
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface, rev. 5: OUI
0x100014, model 0x0001
tl1 at pci3 dev 1 function 0 "Compaq DP Netelligent 10/100TX" rev 0x10:
irq 12 address 00:08:c7:5d:a2:0f
nsphy1 at tl1 phy 1: DP83840 10/100 PHY, rev. 1
ukphy1 at tl1 phy 31: Generic IEEE 802.3u media interface, rev. 5: OUI
0x100014, model 0x0001
emu0 at pci2 dev 14 function 0 "Creative Labs SoundBlaster Audigy" rev
0x04: irq 9
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Audigy Digital" rev 0x04 at pci2 dev 14
function 1 not configured
"Creative Labs Firewire" rev 0x04 at pci2 dev 14 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3200822A>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 90430D3>
wd1: 16-sector PIO, LBA, 4112MB, 8421840 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd2 at pciide0 channel 1 drive 0: <WDC WD200BB-00DEA0>
wd2: 16-sector PIO, LBA, 19092MB, 39102336 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <BENQ, DVD DD DW1640, BSRB> ATAPI 5/cdrom
removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 11
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 11
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x18
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ed65 netmask fd65 ttymask fdff
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
umass0 at uhub2 port 3 configuration 1 interface 0 " USB Reader" rev
2.00/1.02 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB MS Reader, 1.03> SCSI0
0/direct removable
sd1: drive offline
uhub3 at uhub2 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 4
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Receiver" rev 1.10/25.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Chris Bennett
