I just installed OpenBSD 4.5 i386 on my Lenovo X61s Thinkpad, and even
though dmesg shows that it detects the internal Sierra Wireless MC5725
Cell Modem I am unable to get ppp to dialout on it. The modem is
activated and was able to connect using Verizon Wireless software in
Windows, the option "do not disable when application is closed" was
checked, and the LED is on which means it should be powered on under
OpenBSD. The modem detects as:
umsm0 at uhub5 port 1 configuration 1 interface 0 "Sierra Wireless,
Incorporated Sierra Wireless MC5725 Modem" rev 1.10/0.02 addr 2
I've read the man pages for umsm devices and have tried to setup ppp
using the devices /dev/cuaU0, cuaU1, cuaU2, cuaU3, as well as others
cu* devices, but it always fails to dial. Here's my ppp.conf file:
evdo
set device /dev/cuaU0
set speed 230400
set dial "TIMEOUT 30 \"\" ATZ OK-ATZ-OK ATDT\\T TIMEOUT 60 CONNECT"
set phone "#777"
set login
set authname ######...@vzw3g.com
set authkey vzw
set timeout 12000
add! default HISADDR
enable dns
This config worked on a PC card Pantech modem and was able to dial up
to the Verizon network, so I would think a similar one would work with
the internal Sierra Wireless one. I've also tried to troubleshoot ppp
manually by using it interactively and issuing AT commands, but
whenever I enter term mode it doesn't show appear to do anything
except when I do a ~. to exit.
Here's the ppp log when I do: sudo ppp -background evdo
Jun 10 19:25:42 navi ppp[8362]: Phase: Using interface: tun0
Jun 10 19:25:42 navi ppp[8362]: Phase: deflink: Created in closed state
Jun 10 19:25:42 navi ppp[4413]: Phase: PPP Started (background mode).
Jun 10 19:25:42 navi ppp[4413]: Phase: bundle: Establish
Jun 10 19:25:42 navi ppp[4413]: Phase: deflink: closed -> opening
Jun 10 19:25:42 navi ppp[4413]: Phase: deflink: Connected!
Jun 10 19:25:42 navi ppp[4413]: Phase: deflink: opening -> dial
Jun 10 19:26:43 navi ppp[4413]: Warning: Chat script failed
Jun 10 19:26:43 navi ppp[4413]: Phase: deflink: dial -> hangup
Jun 10 19:26:43 navi ppp[4413]: Phase: deflink: Disconnected!
Jun 10 19:26:44 navi ppp[4413]: Phase: deflink: Connect time: 62 secs:
0 octets in, 0 octets out
Jun 10 19:26:44 navi ppp[4413]: Phase: deflink: 0 packets in, 0 packets out
Jun 10 19:26:44 navi ppp[4413]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Wed Jun 10 19:25:42 2009
Jun 10 19:26:44 navi ppp[4413]: Phase: deflink: hangup -> closed
Jun 10 19:26:44 navi ppp[4413]: Phase: bundle: Dead
Jun 10 19:26:44 navi ppp[4413]: Phase: PPP Terminated (normal).
Jun 10 19:26:44 navi ppp[8362]: Phase: Parent: Child failed (errdead)
The umsm man page does list this device as "suspected as working", so
I'm wondering if it just isn't or if I'm doing something wrong. I
would appreciate any help, thank you.
Micheal
DMESG:
OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2103726080 (2006MB)
avail mem = 2025828352 (1931MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/12/09, BIOS32 rev. 0 @
0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (63 entries)
bios0: vendor LENOVO version "7NETC0WW (2.20 )" date 03/12/2009
bios0: LENOVO 7666W5G
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF!
SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus -1 (EXP4)
acpiprt7 at acpi0: bus 5 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "93P5030" serial 4228 type LION oem "SONY"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xe0000/0x10000!
cpu0: EST: strange msr value 0x0615091f0600880f
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:1d:72:86:19:57
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1
int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1
int 21 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1
int 22 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03:
apic 1 int 17 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog
Devices AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1
int 20 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1
int 21 (irq 11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965AGN" rev
0x61: apic 1 int 17 (irq 11), MIMO 2T3R, MoW1, address
00:1f:3b:03:f5:c3
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1
int 16 (irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1
int 17 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1
int 19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci3 at ppb2 bus 5
cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1
int 16 (irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1
int 18 (irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1
int 16 (irq 10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72321, FC2O> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic
1 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umsm0 at uhub5 port 1 configuration 1 interface 0 "Sierra Wireless,
Incorporated Sierra Wireless MC5725 Modem" rev 1.10/0.02 addr 2
ucom0 at umsm0
ubt0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 3
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
