Hi,
I found the line
wdc_atapi_start: not ready, st = 59
repeated 10 times during my boot up on the screen.
What is the problem?
thanks
Siju
Full dmesg
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1039691776 (991MB)
avail mem = 996986880 (950MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/20/04, BIOS32 rev. 0 @
0xfb990, SMBIOS rev. 2.3 @ 0xf0000 (48 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS A7V400-MX ACPI
BIOS Revision 1003" date 07/20/2004
bios0: ASUS A7V400-MX
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd984
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd8e0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00 0xc8000/0x8000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe0000000, size 0xf000000
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
skc0 at pci0 dev 9 function 0 "D-Link Systems DGE-530T A1" rev 0x11,
Yukon (0x1): irq 10
sk0 at skc0 port A: address 00:11:95:c0:d1:4d
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 3
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-00JHC0>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD400BB-00HEA0>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
wdc_atapi_start: not ready, st = 59
atapiscsi0(pciide0:1:1): using PIO mode 4
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 5
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11,
address 00:11:2f:96:fb:aa
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef65 netmask ef65 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
kqemu: kqemu version 0x00010300 loaded, max locked mem=507660kB
DDB symbols added: 337632 bytes
