I just installed the latest OpenBSD/i386 snapshot on my Aspire One,
and if I run "ifconfig ath0 scan", it results in a kernel panic.
Also worth pointing out, if I touch the touchpad at all during the
installer, it results in a few lines of "pckbcintr: no dev for slot
1". This also seems to have the annoying side effect that keyboard
state changes (e.g., releasing the enter key) go unnoticed for a
while, which result in having to restart the installer. The problem
only exists when using bsd.rd.
Both dmesgs (with stacktrace where appropriate) below.
First, bsd(.mp) with the kernel panic after running "ifconfig ath0 scan":
OpenBSD 4.5-current (GENERIC.MP) #32: Sun May 10 22:10:12 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1060163584 (1011MB)
avail mem = 1016750080 (969MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @
0xe8e70 (32 entries)
bios0: vendor Acer version "v0.3309" date 10/06/2008
bios0: Acer AOA110
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3)
ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus 4 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c1a06000c1a
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz (1116 mV): speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
extent `pciio' (0x0 - 0xffffffff), flags=0
0x1000 - 0x60af
0x60c0 - 0x60c7
0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x9ffff
0xe0000 - 0x58543fff
0x58544400 - 0x585447ff
0xe0000000 - 0xefffffff
0xfec00000 - 0xfec00fff
0xfed14000 - 0xfed19fff
0xfed1c000 - 0xfed1ffff
0xfee00000 - 0xfee00fff
0xfff00000 - 0xffffffff
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 4 int 16 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4
int 16 (irq 255)
pci1 at ppb0 bus 1
extent `ppb0 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0x4fff
0x6000 - 0xffffffff
extent `ppb0 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x572fffff
0x58400000 - 0xffffffff
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4
int 17 (irq 255)
pci2 at ppb1 bus 2
extent `ppb1 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0x30ff
0x5000 - 0xffffffff
extent `ppb1 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x562fffff
0x57300000 - 0xffffffff
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 4 int 17 (irq 11), address 00:23:8b:59:35:6d
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4
int 18 (irq 255)
pci3 at ppb2 bus 3
extent `ppb2 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0x1fff
0x3000 - 0xffffffff
extent `ppb2 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x5520ffff
0x56300000 - 0xffffffff
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 18 (irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:37:ed:06
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4
int 19 (irq 255)
pci4 at ppb3 bus 4
extent `ppb3 pciio' (0x0 - 0xffffffff), flags=0
0x0 - 0xfff
0x2000 - 0xffffffff
extent `ppb3 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x541003ff
0x55200000 - 0xffffffff
"JMicron SD/MMC" rev 0x00 at pci4 dev 0 function 0 not configured
sdhc0 at pci4 dev 0 function 2 "JMicron SD Host Controller" rev 0x00:
apic 4 int 19 (irq 11)
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x00 at pci4 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci4 dev 0 function 4 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4
int 17 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4
int 19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <P-SSD1800>
wd0: 1-sector PIO, LBA, 7695MB, 15761088 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
4 int 17 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 7646MB, 512 bytes/sec, 15659008 sec total
acpibat0: BAT1 inserted
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology
Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2
video0 at uvideo0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ath0: unable to reset hardware; hal status 3520271360
ath0: unable to reset hardware; hal status 3692047692
uvm_fault(0xd6b18bc0, 0xf000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at ath_chan_set+0x43: movw 0(%edi),%ax
ddb{0}> uvm_fault(0xd6b18bc0, 0xf000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at ath_chan_set+0x43: movw 0(%edi),%ax
ddb{0}> No such command
ddb{0}> No such command
ddb{0}> machine print examine x search set
write w delete d break dwatch
watch step s continue c until
next match trace call ps callout
show boot help hangman dmesg
ddb{0}> No such command
ddb{0}> Ambiguous
ddb{0}> ath_chan_set(d1be4000,ffff,3c50,d08cde60) at ath_chan_set+0x43
ath_newstate(d1be4030,1,ffffffff,d1be4030) at ath_newstate+0xa4
ieee80211_ioctl(d1be4030,802069d2,dc102e78,0) at ieee80211_ioctl+0x8d1
ath_ioctl(d1be4030,802069d2,dc102e78,dc102e78,dc102e78) at ath_ioctl+0x63
in_control(d69d2778,802069d2,dc102e78,d1be4030,d1be4030,d6afdda0,dc102e78,8823)
at in_control+0x118
ifioctl(d69d2778,802069d2,dc102e78,d6afdda0,d6af59dc) at ifioctl+0x1cc
sys_ioctl(d6afdda0,dc102f68,dc102f58,d6afdda0) at sys_ioctl+0x125
syscall() at syscall+0x12b
--- syscall (number 54) ---
0x1c0090e5:
ddb{0}> No such command
ddb{0}> sync crash dump halt reboot poweroff
ddb{0}> syncing disks...
====================
Next, bsd.rd with the pckbcintr warnings:
OpenBSD 4.5-current (RAMDISK_CD) #140: Sun May 10 22:18:51 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1060163584 (1011MB)
avail mem = 1018400768 (971MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @
0xe8e70 (32 entries)
bios0: vendor Acer version "v0.3309" date 10/06/2008
bios0: Acer AOA110
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus 4 (EXP4)
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4
int 16 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4
int 17 (irq 255)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 4 int 17 (irq 11), address 00:23:8b:59:35:6d
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4
int 18 (irq 255)
pci3 at ppb2 bus 3
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 18 (irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:37:ed:06
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4
int 19 (irq 255)
pci4 at ppb3 bus 4
"JMicron SD/MMC" rev 0x00 at pci4 dev 0 function 0 not configured
"JMicron SD Host Controller" rev 0x00 at pci4 dev 0 function 2 not configured
"JMicron Memory Stick" rev 0x00 at pci4 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci4 dev 0 function 4 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4
int 17 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4
int 19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <P-SSD1800>
wd0: 1-sector PIO, LBA, 7695MB, 15761088 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
"Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2 at
uhub0 port 5 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
