Hi Nick,
On Tue, 2009-05-05 at 09:48 -0400, Nick Guenther wrote:
> Your disks aren't showing up in dmesg. Try tweaking your BIOS
> settings--i know that I had to change from IDE emulation to AHCI when
> I upgraded to 4.5.
That did the trick. Thanks. I'm hoping to replace my current GNOME
desktop with an OpenBSD-based one, so I can keep more in touch with this
excellent little system;).
Bill
> On 05/05/2009, Bill Maas <b...@stsx.org> wrote:
> > Hi,
> >
> > First, and just for the record: while trying to set up an FTP server on
> > OpenBSD 4.2 I got this error message while trying to connect by any
> > other address than 'localhost':
> >
> > 421 Service not available, remote server has closed connection.
> >
> > Reason, it turned out: a missing entry in /etc/hosts.allow. I had a hard
> > time finding anything relevant out there, so now at least the relation
> > between the error message and the missing entry is documented.
> >
> >
> > The reason I needed an FTP server is that I'm trying to install OpenBSD
> > 4.5 on a Lenovo Thinkpad W500 model 4058-CTO, with no success. With obsd
> > 4.4 it never got past hardware initialization, with 4.5 at least I get
> > the installer menu, but no for long:
> >
> > [...]
> > Proceed with install? [n] y
> > [...]
> >
> > No disks found
> > #
> >
> > And no, I don't expect developers to _scramble to their laptops_ just
> > because I as an OpenBSD user am _entitled to have this fixed ASAP_ and
> > stuff like that. I was at least happy to see that the Fathers of OpenBSD
> > in their infinite wisdom decided to use plain ftp for downloading
> > packages, and not some custom-built single-purpose
> > binary-installer-builtin, so I could at least get a dmesg off the box (I
> > didn't manage to get a screen capture over USB).
> >
> > The output from the 'dmesg' command run from the shell commandline is
> > listed below. I'm only an "index" list member, but feel free to contact
> > me offlist if you need more info. I'll be happy to help testing any
> > updates. And I'll be following any replies through the archives of
> > course.
> >
> > An otherwise very happy OpenBSD user,
> >
> >
> > Bill
> >
> >
> > dmesg:
> > --------------------------------------------------------------------------
> > OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
> > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> > cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
> > 686-class) 2.53 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> > real mem = 3214176256 (3065MB)
> > avail mem = 3115958272 (2971MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
> > SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> > bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
> > bios0: LENOVO 4058CTO
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
> > SSDT SSDT SSDT SSDT
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 265MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 2, remapped to apid 1
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (AGP_)
> > acpiprt2 at acpi0: bus 2 (EXP0)
> > acpiprt3 at acpi0: bus 3 (EXP1)
> > acpiprt4 at acpi0: bus -1 (EXP2)
> > acpiprt5 at acpi0: bus 5 (EXP3)
> > acpiprt6 at acpi0: bus 13 (EXP4)
> > acpiprt7 at acpi0: bus 21 (PCI1)
> > bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
> > 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
> > (irq 11)
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
> > int 20 (irq 11), address 00:1c:25:97:34:61
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> > 20 (irq 11)
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> > 21 (irq 11)
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> > 22 (irq 11)
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> > 23 (irq 11)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not
> > configured
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 20 (irq 11)
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 21 (irq 11)
> > pci3 at ppb2 bus 3
> > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
> > int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
> > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 23 (irq 11)
> > pci4 at ppb3 bus 5
> > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 20 (irq 11)
> > pci5 at ppb4 bus 13
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> > 16 (irq 11)
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> > 17 (irq 11)
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> > 18 (irq 11)
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> > 19 (irq 11)
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci6 at ppb5 bus 21
> > cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
> > 16 (irq 11)
> > "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
> > "Ricoh 5C822 SD/MMC" rev 0x21 at pci6 dev 0 function 2 not configured
> > "Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
> > configured
> > "Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
> > pcmcia0 at cardslot0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt
> > pciide0: couldn't map channel 0 cmd regs
> > pciide0: couldn't map channel 1 cmd regs
> > "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > rd0: fixed, 3800 blocks
> > "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at
> > uhub0 port 6 not configured
> > "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev
> > 2.00/3.52 addr 2 at uhub3 port 2 not configured
> > "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2 at uhub7 port
> > 2 not configured
> > softraid0 at root
> > root on rd0a swap on rd0b dump on rd0b
> > --------------------------------------------------------------------------
