Hi all,
I have two HP DL380 G3 servers with two 36Gb SAS drives on it in a
hardware RAID 1 mirror using the inbuilt raid controller.
When I do an ls /path/file<tab><tab> to get a possible match list, the
server disk subsystem hangs.
If I do "ls /dev/<tab><tab>" it always hangs, keyboard does not
respond, can not ctrl-c or crtl-alt-del. Have to cold reboot system.
The systems otherwise work fine except I have some problems using the
com port. Which leads me to think it might be some sort of IRQ
conflict in the system, but can't see what it might be.
The server will continue to route traffic over the network cards and
PF continues to function, however, the only way to regain control of
the system is by a full reboot.
I have done this from both remote console and on the system console
with the same consequences.
These are both production systems and so my testing has been sporadic.
FWIW i have two other systems running OpenBSD 4.3 and I have never had
this problem.
Googling did not turn up any results.
Any ideas?
Mikel
$ dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.79 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073287168 (1023MB)
avail mem = 1029394432 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xec000 (49 entries)
bios0: vendor HP version "P29" date 03/25/2003
bios0: HP ProLiant DL380 G3
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 2 (PCI2)
acpiprt3 at acpi0: bus 3 (PCI3)
acpiprt4 at acpi0: bus 6 (PCI4)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC-WS Host (GC-LE)" rev 0x13
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC-WS Host (GC-LE)" rev 0x00
pci1 at pchb1 bus 3
pchb2 at pci0 dev 0 function 2 "ServerWorks CMIC-LE" rev 0x00
pci2 at pchb2 bus 1
ciss0 at pci2 dev 3 function 0 "Compaq Smart Array 5i/532 rev.2" rev
0x01: irq 10
ciss0: 1 LD, HW rev 1, FW 2.76/2.76
scsibus0 at ciss0: 1 targets, initiator 1
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.76> SCSI2
0/direct fixed
sd0: 34727MB, 4427 cyl, 255 head, 63 sec, 512 bytes/sec, 71122560 sec total
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
"Compaq iLO" rev 0x01 at pci0 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci0 dev 4 function 2 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x51: 256MB DDR SDRAM registered ECC PC2100CL2.5
spdmem1 at iic0 addr 0x52: 256MB DDR SDRAM registered ECC PC2100CL2.5
spdmem2 at iic0 addr 0x53: 256MB DDR SDRAM registered ECC PC2100CL2.5
spdmem3 at iic0 addr 0x54: 256MB DDR SDRAM registered ECC PC2100CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus1 targ 0 lun 0: <Compaq, DVD-ROM DV28EB01, D.2F> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
couldn't establish interrupt at irq 15
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci3 at pchb5 bus 6
em0 at pci3 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03:
irq 7, address 00:12:79:9e:1a:8a
em1 at pci3 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03:
irq 11, address 00:12:79:9e:1a:8b
"Compaq PCI Hotplug" rev 0x14 at pci3 dev 30 function 0 not configured
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci4 at pchb7 bus 2
bge0 at pci4 dev 1 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 7, address 00:0b:cd:2a:3a:51
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 11, address 00:0b:cd:2a:3a:50
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e56d netmask eded ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
