Re: Error while applying 001_openssl.patch on OpenBSD 4.5

Sat, 02 May 2009 23:14:48 -0700 

Ya, right, it's my fault.

However, as usually, I exactly followed the instructions in the patch file:

=============================================
This is version 2 of this patch.

Apply by doing:
        cd /usr/src
        patch -p0 < 001_openssl.patch

And then rebuild and install the library and statically-linked binaries
that depend upon it:

        cd lib/libssl
        make obj
        make depend
        make includes
        make
        make install
        cd ../../sbin
        make obj
        make depend
        make
        make install
=============================================

I guess that's the way to go, isn't it?




Theo de Raadt wrote:

Well, you did not build your tree correctly.  It is well documented in
'man release' and in the /usr/src/Makefile
I just tried to patch a virgin OpenBSD 4.5 installation by applying 001_openssl.patch (Version 2).
After successfully rebuilding and installing the library, as well as successfully rebuilding the statically linked binaries, running 'make install' in /usr/src/sbin fails as follows: 

================== snip ====================
...
===> fsck
install -c -s -o root -g bin  -m 555 fsck /sbin/fsck
install -c -o root -g bin -m 444 fsck.cat8 /usr/share/man/cat8/fsck.0
===> fsck_ext2fs
install -c -s -o root -g bin  -m 555 fsck_ext2fs /sbin/fsck_ext2fs
install -c -o root -g bin -m 444 fsck_ext2fs.cat8 /usr/share/man/cat8/fsck_ext2fs.0 
===> fsck_ffs
install -c -s -o root -g bin  -m 555 fsck_ffs /sbin/fsck_ffs
install -c -o root -g bin -m 444 fsck_ffs.cat8 /usr/share/man/cat8/fsck_ffs.0 
===> fsck_ffs/SMM.doc
install -c -o root -g bin -m 444 Makefile 0.t 1.t 2.t 3.t 4.t /usr/share/doc/smm/03.fsck_ffs 
install: Target: /usr/share/doc/smm/03.fsck_ffs
*** Error code 71
Stop in /usr/src/sbin/fsck_ffs/SMM.doc (line 47 of /usr/share/mk/bsd.doc.mk). 
*** Error code 1

Stop in /usr/src/sbin/fsck_ffs (line 48 of /usr/share/mk/bsd.subdir.mk).
*** Error code 1

Stop in /usr/src/sbin (line 48 of /usr/share/mk/bsd.subdir.mk).
#

================== snip ====================

Here's my dmesg output (MAC addresses deleted):
--------------------------------------------
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
     dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 267 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR 
real mem  = 200830976 (191MB)
avail mem = 185782272 (177MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/28/99, BIOS32 rev. 0 @ 0xfcc22
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 2:25 hours
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0ec0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:05:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #21 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 3 function 0 "S3 ViRGE MX" rev 0x06
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility 
wd0 at pciide0 channel 0 drive 0: <IBM-DPLA-25120>
wd0: 16-sector PIO, LBA, 4887MB, 10009440 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2002, 1324> ATAPI 5/cdrom removable 
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMBus disabled "Toshiba Fast Infrared Type O" rev 0x33 at pci0 dev 9 function 0 not configured 
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x44: irq 11
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x44: irq 11
vendor "Toshiba", unknown product 0x0406 (class multimedia subclass video, rev 0x04) at pci0 dev 12 function 0 not configured vendor "Toshiba", unknown product 0x0407 (class multimedia subclass miscellaneous, rev 0x02) at pci0 dev 13 function 0 not configured 
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
ne3 at pcmcia0 function 0 "Dual Speed, 10/100 PC Card, 1.0" port 0xa000/32, address <deleted> ukphy0 at ne3 phy 4: Generic IEEE 802.3u media interface, rev. 2: OUI 0x0010dd, model 0x0001 xl0 at cardbus1 dev 0 function 0 "3Com 3CCFE575BT" rev 0x01: irq 11, address <deleted> 
tqphy0 at xl0 phy 0: 78Q2120 10/100 PHY, rev. 3
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--------------------------------------------


Any suggestions are kindly appreciated.

Reply via email to