I am running OBSD 4.4/i386 on a Dell Inspiron 6400 (E1505) w/ 2GB RAM
and a 2.0 GHz Intel Core 2 Duo CPU ("Merom").
I am running the GENERIC OBSD 4.4/i386 'bsd' kernel and would like
to set up the bsd.mp kernel instead.
How do I go about this?
Attached is my dmesg as a text file.
-minsai0000
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2145820672 (2046MB)
avail mem = 2066497536 (1970MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/13/07, BIOS32 rev. 0 @ 0xffa10, SMBIOS
rev. 2.4 @ 0xf7980 (44 entries)
bios0: vendor Dell Inc. version "A17" date 06/13/2007
bios0: Dell Inc. MM061
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT SSDT
acpi0: wakeup devices LID_(S3) PBTN(S4) MBTN(S5) PCI0(S3) USB0(S0) USB1(S0)
USB2(S0) USB3(S0) EHCI(S0) AZAL(S3) PCIE(S4) RP01(S4) RP02(S3) RP03(S3)
RP04(S3) RP05(S3) RP06(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpiprt3 at acpi0: bus 11 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus 12 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus -1 (RP06)
acpicpu0 at acpi0: C3, C2, C1
acpitz0 at acpi0: critical temperature 126 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model " DELLPD9458" serial 987 type LION oem "Sanyo"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: irq 4
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: no integrated graphics
drm at vga1 unsupported
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 11
azalia0: codec[s]: Sigmatel STAC9200, Conexant/0x2bfa, using Sigmatel STAC9200
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 4
pci2 at ppb1 bus 11
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 4,
MoW1, address 00:19:d2:bc:92:76
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 3
pci3 at ppb2 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 9
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 7
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 3
bce0 at pci4 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: irq 5, address
00:19:b9:63:86:a4
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
"Ricoh 5C832 Firewire" rev 0x00 at pci4 dev 1 function 0 not configured
sdhc0 at pci4 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: irq 9
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x01 at pci4 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci4 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci4 dev 1 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160JI>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-5540A, 102C> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 5
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efe5 netmask eff5 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
