OpenBSD 4.4 on a Dell Poweredge 2950. SCSI card is an LSI 20320, tape
drive is Dell Powervault 124T (aka IBM Ultrium-TD3).
The tape drive shows up in the card's BIOS, but dmesg sees it as a
SCSI device with no drivers:
----
# dmesg | grep mpi0
mpi0 at pci6 dev 8 function 0 "Symbios Logic 53c1030" rev 0xc1: irq 6
scsibus0 at mpi0: 16 targets, initiator 7
mpi0: target 0 Sync at 40MHz width 8bit offset 127 QAS 0 DT 0 IU 0
# dmesg | grep scsibus0
scsibus0 at mpi0: 16 targets, initiator 7
uk0 at scsibus0 targ 0 lun 0: <UTIMT3, 8P, > SCSI3 1/sequential fixed
----
This same drive worked on a Dell 2850 with an Adaptec 39160, but I
have to move to the 2950 and it only has PCI-e slots. Using an example
I don't fully understand from man 8 scsi, I can query the name of the
device:
----
# scsi -f /dev/uk0 -c "12 0 0 0 64 0" -i 0x64 "s8 z8 z16 z4"
IBM ULTRIUM-TD3 85P8
----
Any idea why this failing with one card and not the other?
-HKS
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem = 2142142464 (2042MB)
avail mem = 2062938112 (1967MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/12/08, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.5 @ 0x7fb9c000 (67 entries)
bios0: vendor Dell Inc. version "2.5.0" date 09/12/2008
bios0: Dell Inc. PowerEdge 2950
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 0 (PE2P)
acpiprt7 at acpi0: bus 11 (PEX4)
acpiprt8 at acpi0: bus 13 (PEX6)
acpiprt9 at acpi0: bus 2 (SBEX)
acpiprt10 at acpi0: bus 15 (COMP)
acpicpu0 at acpi0: C3
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x800
0xca800/0x1e00 0xcc800/0x5e00 0xec000/0x4000!
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: irq 5
pci5 at ppb4 bus 8
ppb5 at pci5 dev 0 function 0 "PLX PEX 8114" rev 0xbc
pci6 at ppb5 bus 9
mpi0 at pci6 dev 8 function 0 "Symbios Logic 53c1030" rev 0xc1: irq 6
scsibus0 at mpi0: 16 targets, initiator 7
uk0 at scsibus0 targ 0 lun 0: <UTIMT3, 8P, > SCSI3 1/sequential fixed
mpi0: target 0 Sync at 40MHz width 8bit offset 127 QAS 0 DT 0 IU 0
ppb6 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci7 at ppb6 bus 10
ppb7 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci8 at ppb7 bus 1
mfi0 at pci8 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: irq 5,
Dell PERC 6/i integrated
mfi0: logical drives 1, version 6.0.2-0002, 256MB RAM
scsibus1 at mfi0: 1 targets, initiator 64
sd0 at scsibus1 targ 0 lun 0: <DELL, PERC 6/i, 1.11> SCSI3 0/direct fixed
sd0: 2859520MB, 44942 cyl, 511 head, 255 sec, 512 bytes/sec,
5856296960 sec total
ppb8 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci10 at ppb9 bus 12
ppb10 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci12 at ppb11 bus 14
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb12 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci13 at ppb12 bus 2
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci14 at ppb13 bus 3
bnx1 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 15
vga1 at pci15 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-ROM CD-224E-N, 3.AC> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fde5 netmask fde5 ttymask ffff
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 4
uhidev2 at uhub6 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.52 addr 5
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:1e:c9:43:0e:d4
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1e:c9:43:0e:d6
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
