Hello everyone,
A little searching on the lists and Google don't reveal anyone else
having this problem, so I thought I'd ask for help. I originally tried
installing 4.3 on this machine awhile back, and when I ran into this
problem, I had other things to do, so I never followed up on it. Now that
I have my shiny 4.4 CD, I thought I'd give it a try again, alas, I'm still
having the same problem.
In short, the machine freezes at some point during the install process.
It does not respond to any keypresses. It always gets past OpenFirmware
and the OpenBSD boot prompt. I am usually able to start the installer.
But then, at some arbitrary point, it hangs. Sometimes this is during the
boot process; sometimes this is while I'm in the middle of typing
something; sometimes it is while the installer sets up the disks. As I
mentioned before, this happens with both 4.3 and 4.4.
Oh-- and I've tried multiple hard disks, and I even tried plugging in a
Sonnet PCI IDE controller, in case there was something broken with the
integrated one.
This machine is a standard Sawtooth G4, except that it has a different
CD-ROM drive than the original, and the processor has been upgraded. You
can see that in the dmesg below.
I just reinstalled the MacOS on the machine (10.5), and that runs OK.
I haven't tried any other OSes, but I suppose I could.
Anyway, here's my dmesg. Anyone have any suggestions, or things I could
try to get some kind of debug info back?
[ using 245420 bytes of bsd ELF symbol table ]
console out [ATY,Pheonix_A]console in [keyboard] , using USB
using parent ATY,PheonixParent:: memaddr 98000000 size 8000000, : consaddr
9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width
1280 linebytes 1280 height 1024 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.4 (RAMDISK) #1544: Mon Aug 11 13:51:46 MDT 2008
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/RAMDISK
real mem = 2147483648 (2048MB)
avail mem = 2078171136 (1981MB)
mainbus0 at root: model PowerMac3,1
cpu0 at mainbus0: 7455 (Revision 0x303): 1200 MHz: 256KB L2 cache, 2MB L3
cache
mem at mainbus0 not configured
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9000" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0xff
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
ppb0 at pci1 dev 13 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci2 at ppb0 bus 1
macobio0 at pci2 dev 7 function 0 "Apple Keylargo" rev 0x02
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
"programmer-switch" at macgpio0 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
"davbus" at macobio0 offset 0x14000 not configured
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
"i2c" at macobio0 offset 0x18000 not configured
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 offset 0x20000 irq 20: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.21> ATAPI
5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 offset 0x21000 irq 21: DMA
ohci0 at pci2 dev 8 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci2 dev 9 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
"TI TSB12LV23 FireWire" rev 0x00 at pci2 dev 10 function 0 not configured
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0xff
pci3 at mpcpcibr2 bus 0
pchb2 at pci3 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
gem0 at pci3 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41,
address 00:30:65:76:26:74
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
rd0: fixed, 8192 blocks
umass0 at uhub0 port 1 configuration 1 interface 0 "Memorex Flashdrive
303B" rev 2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Memorex, Flashdrive 303B, PMAP> SCSI0
0/direct removable
sd0: 122MB, 15 cyl, 255 head, 63 sec, 512 bytes/sec, 251776 sec total
uhub2 at uhub1 port 1 "Mitsumi Electric Hub in Apple Extended USB
Keyboard" rev 1.10/1.22 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric
Apple Extended USB Keyboard" rev 1.10/1.22 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Mitsumi Electric
Apple Extended USB Keyboard" rev 1.10/1.22 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 2 configuration 1 interface 0 "vendor 0x04d9 product
0x0499" rev 1.10/2.90 addr 4
uhidev2: iclass 3/1
uhid2 at uhidev2: input=4, output=0, feature=0
bootpath: /p...@f2000000/@d/mac...@7/at...@20000/d...@0:/4.4/macppc/bsd.rd
root on rd0a swap on rd0b dump on rd0b
WARNING: clock gained 220 days -- CHECK AND RESET THE DATE!
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub0 port 1 configuration 1 interface 0 "Memorex Flashdrive
303B" rev 2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Memorex, Flashdrive 303B, PMAP> SCSI0
0/direct removable
sd0: 122MB, 15 cyl, 255 head, 63 sec, 512 bytes/sec, 251776 sec total
Thanks,
Dan
