On Mon, Mar 16, 2009 at 7:42 AM, Alvaro Mantilla Gimenez <
alv...@dydnetworks.com> wrote:
> Hello,
>
> I send this messages to b...@openbsd.org a few days ago. I don't know if
> this is the all the information the developers need. Anyway I would like to
> create this thread just for search purposes...may be there is more people
> with the same problem. I found a previous thread about this but it seems
> nobody talk about the channel problem.
>
> Regards,
I've had the same problem with my Thinkpad T400 since 4.3 (and continue to
do so with -current). I submit reminders about the issue whenever I submit a
dmesg and as far as I know some versions of that chip are supported and
other versions are being worked on. I realize this comment isn't the most
informative, but since you brought it up, I thought I'd let you know there
are others in a similar situation.
There has been talk of Atheros opening up to the linux community and I've
seen chatter on freeBSD lists (specifically about our chipset).
>
> -------- Original Message --------
> Subject: Acer Aspire One freeze with Atheros AR5424 on OpenBSD 4.5
> Date: Thu, 12 Mar 2009 14:48:59 -0600
> From: Alvaro Mantilla Gimenez <alv...@dydneworks.com>
> To: b...@openbsd.org
>
> Hello,
>
> 1) Steps to recreate the issue:
>
> /sbin/ifconfig ath0 scan
>
>
> 2) Dmesg of the computer:
>
> OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> RTC BIOS diagnostic error 80<clock_battery>
> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu0:
>
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
> real mem = 1060163584 (1011MB)
> avail mem = 1016815616 (969MB)
> RTC BIOS diagnostic error 80<clock_battery>
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @
> 0xe9180 (32 entries)
> bios0: vendor Acer version "v0.3308" date 10/06/2008
> bios0: Acer AOA150
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
> acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3)
> ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 5 (P32_)
> acpiprt2 at acpi0: bus 1 (EXP1)
> acpiprt3 at acpi0: bus 2 (EXP2)
> acpiprt4 at acpi0: bus 3 (EXP3)
> acpiprt5 at acpi0: bus 4 (EXP4)
> acpiec0 at acpi0
> acpicpu0 at acpi0
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpibat0 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpivideo at acpi0 not configured
> bios0: ROM list: 0xc0000/0xec00!
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2006000c20
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1600 MHz (1212 mV): speeds: 1600, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x40000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
> apic 4 int 16 (irq 11)
> azalia0: codecs: Realtek ALC268
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 16 (irq 255)
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 17 (irq 255)
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
> (0x2480), apic 4 int 17 (irq 11), address 00:23:8b:50:c0:3e
> rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 18 (irq 255)
> pci3 at ppb2 bus 3
> ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 18
> (irq 11)
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:02:32:05
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int
> 19 (irq 255)
> pci4 at ppb3 bus 4
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int
> 16 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int
> 17 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int
> 18 (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int
> 19 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int
> 16 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 5
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <ST9160310AS>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4
> int 17 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> acpibat0: BAT1 inserted
> uvideo0 at uhub0 port 5 configuration 1 interface 0 "SuYin Acer Crystal
> Eye webcam" rev 2.00/0.01 addr 2
> video0 at uvideo0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>
> 3) lspci -vv
>
> 03:00.0 Ethernet controller: Atheros Communications Inc. AR242x
> 802.11abg Wireless PCI Express Adapter (rev 01)
> Subsystem: Foxconn International, Inc. Device e008
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 55200000 (64-bit, non-prefetchable)
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Mask- 64bit- Count=1/1 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <512ns, L1 <64us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled-
> Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
> Vector table: BAR=0 offset=00000000
> PBA: BAR=0 offset=00000000
>
> 4) ddb output (manual transcription):
>
> panic: trap type 6. code=0, pc=d02af677
> Starting stack trace...
> panic(d07a8c58,0,dbfe1ae0,0,d6a0ac40) at panic+0x65
> panic(d071aea7,6,0,d02af677,d1ad8000) at panic+0x65
> trap() at trap+0x119
> --- trap (number 6) ---
> ath_chan_set(d1ad6000,ffff,dbfe1b90,d0467ef9) at ath_chan_set+0x43
> ath_newstate(d1ad6030,1,ffffffff,d1ad6030) at ath_newstate+0xa4
> ieee80211_ioctl(d1ad6030,802069d2,dbfe1e78,0) at ieee80211_ioctl+0x879
> ath_ioctl(d1ad6030,802069d2,dbfe1e78,dbfe1e78,dbfe1e78) at
> ath_ioctl+0x63
>
> in_control(d698fd40,802069d2,dbfe1e78,d1ad6030,d1ad6030,d6a0ac40,d1bfc800,d0361b48)
>
> at in_control+0x118
> ifioctl(d698fd40,802069d2,dbfe1e78,d6a0ac40,d69bd820) at ifioctl+0x1cc
> sys_ioctl(d6a0ac40,dbfe1f68,dbfe1f58,5,40) at sys_ioctl+0x125
> syscall() at syscall+0x24e
> --- syscall (number 54) ---
> 0x1c0090b9:
> End of stack trace.
> syncing disks... 7 7 done
> dumping to dev 1, offset 2137557
>
>
> Please, let me know if you need something else.
>
> Regards,
>
>
> Alvaro
>
>
--
www.nealhogan.net www.lambdaserver.com
