It's not working well at all. I get this, after specifying videoram=8000
(WW) intel(0): VideoRam configuration found, which is no longer recommended.
(II) intel(0): Continuing with default 131072kB VideoRam instead of 8000 kB.
(II) intel(0): Kernel reported 112640 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 450560 kB available
(EE) intel(0): [dri] I830CheckDRIAvailable failed: dri not loaded
which seems a little out of bounds (it's an IBM netvista with 8MB video
RAM). I tell it 8MB and it decides 128MB is a better experience!
It does work on 4.3, but that xorg.conf does not work on the current 4.5
beta.
Any hints? I've tried the usual on/off with dri, dbe, GLcore, dga, and
defining various videoram levels including none, of course, starting with
Xorg -configure.
Can someone suggest any better places to look for a diagnostic process?
thanks
--John
OpenBSD 4.5-beta (GENERIC) #1735: Sun Feb 22 20:14:48 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 526852096 (502MB)
avail mem = 501149696 (477MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/10/05, BIOS32 rev. 0 @ 0xfd844,
SMBIOS rev. 2.31 @ 0xf00f0 (51 entries)
bios0: vendor IBM version "24KT55AUS" date 05/10/2005
bios0: IBM 830542U
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP TCPA APIC BOOT
acpi0: wakeup devices USB1(S3) USB2(S3) USB3(S3) USBE(S3) SLOT(S5)
KBC_(S3) COMA(S5) COMB(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (SLOT)
acpiprt2 at acpi0: bus -1 (AGP_)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 105 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xb400 0xcb800/0x1000 0xcc800/0x1000
0xe0000/0x10000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x88000000, size 0x8000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 1 int
16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 1 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 1 int
18 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 1 int
23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 2
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: apic 1
int 20 (irq 9), address 00:0d:60:08:d6:92
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
"Realtek 8185" rev 0x20 at pci1 dev 9 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L060AVV207-0>
wd0: 16-sector PIO, LBA48, 38162MB, 78156288 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S182M, SB03> ATAPI
5/cdrom removable
wd1 at pciide0 channel 1 drive 1: <Maxtor 5T060H6>
wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: apic 1
int 17 (irq 9)
iic0 at ichiic0
admtemp0 at iic0 addr 0x4c: adm1032
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: apic 1 int
17 (irq 9), ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
