How do I get the kernel to recognize 8GB of RAM? It is only recognizing 3.3GB?
Also, where do I go for packages for 4.5 current? The install.amd64 file reference ftp://ftp.openbsd.org/pub/OpenBSD/4.5/amd64 but no such ftp exists. -Dave dmesg below: ing; disabled or no drives?) ppb3 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 4 int 16 (irq 10) pci4 at ppb3 bus 2 mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x12, Yukon-2 EC Ultra (0x3): apic 4 int 17 (irq 11) msk0 at mskc0 port A: address 00:22:15:9c:87:7e eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 4 int 23 (irq 7) uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 4 int 19 (irq 5) uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 4 int 18 (irq 15) ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 4 int 23 (irq 7) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci5 at ppb4 bus 5 skc0 at pci5 dev 2 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x14, Yukon Lite (0x9): apic 4 int 18 (irq 15) sk0 at skc0 port A: address 00:22:15:9c:9d:b7 eephy1 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5 "AT&T/Lucent FW322 1394" rev 0x70 at pci5 dev 3 function 0 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 4 int 19 (irq 5) for native-PCI interrupt pciide1: channel 0 ignored (not responding; disabled or no drives?) atapiscsi0 at pciide1 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S223Q, SB02> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 4 int 18 (irq 15) iic0 at ichiic0 iic0: addr 0x1e 01=01 02=01 11=01 12=01 20=05 21=01 22=01 23=05 31=01 32=01 words 00=0001 01=0101 02=0100 03=0000 04=0000 05=0000 06=0000 07=0000 iic0: addr 0x20 01=80 02=17 03=7f 10=00 19=b0 20=20 21=00 25=20 26=b2 38=74 39=03 4a=64 6a=2c 78=02 79=08 7a=00 7b=00 7e=82 80=00 8b=3e 8c=dd 96=5c 99=41 9a=98 9b=01 d0=00 d1=03 d2=72 d3=72 d4=03 d5=02 d6=01 d7=72 d8=6b d9=00 da=00 db=00 dc=00 dd=00 de=00 df=19 e0=00 e1=00 e2=10 e3=10 e4=10 e5=10 e6=10 e7=10 e8=10 e9=10 ea=10 ec=07 ee=00 f1=0d f5=02 f6=02 f9=00 fa=00 fb=50 words 00=ffff 01=8037 02=1766 03=7fff 04=ffff 05=ffff 06=ffff 07=ffff spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 4 int 19 (irq 5) for native-PCI interrupt wd0 at pciide2 channel 0 drive 0: <WDC WD1001FALS-00J7B0> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors pciide2: channel 1 ignored (not responding; disabled or no drives?) usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lm0 at isa0 port 0x290/8: W83627DHG fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 mtrr: Pentium Pro MTRR support umass0 at uhub4 port 1 configuration 1 interface 0 "Generic Mass Storage Device" rev 2.00/1.29 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable sd1: drive offline sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable sd2: drive offline sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable sd3: drive offline uhidev0 at uhub5 port 2 configuration 1 interface 0 "Composite USB PS2 Converter USB to PS2 Adaptor V3.10" rev 1.10/3.10 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 2 configuration 1 interface 1 "Composite USB PS2 Converter USB to PS2 Adaptor V3.10" rev 1.10/3.10 addr 2 uhidev1: iclass 3/1, 3 report ids ums0 at uhidev1 reportid 1: 5 buttons, Z dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted uhidev2 at uhub2 port 2 configuration 1 interface 0 "Wacom Co.,Ltd. MTE-450" rev 2.00/1.16 addr 2 uhidev2: iclass 3/1, 33 report ids ums1 at uhidev2 reportid 1: 3 buttons, Z dir wsmouse1 at ums1 mux 0 uhid2 at uhidev2 reportid 2: input=8, output=0, feature=1 uhid3 at uhidev2 reportid 3: input=0, output=0, feature=1 uhid4 at uhidev2 reportid 4: input=0, output=0, feature=1 uhid5 at uhidev2 reportid 16: input=0, output=0, feature=2 uhid6 at uhidev2 reportid 17: input=0, output=0, feature=16 uhid7 at uhidev2 reportid 19: input=0, output=0, feature=1 uhid8 at uhidev2 reportid 32: input=0, output=0, feature=1 uhid9 at uhidev2 reportid 33: input=0, output=0, feature=1 wsmouse1 detached ums1 detached uhid2 detached uhid3 detached uhid4 detached uhid5 detached uhid6 detached uhid7 detached uhid8 detached uhid9 detached uhidev2 detached uhidev2 at uhub3 port 2 configuration 1 interface 0 "Wacom Co.,Ltd. MTE-450" rev 2.00/1.16 addr 2 uhidev2: iclass 3/1, 33 report ids ums1 at uhidev2 reportid 1: 3 buttons, Z dir wsmouse1 at ums1 mux 0 uhid2 at uhidev2 reportid 2: input=8, output=0, feature=1 uhid3 at uhidev2 reportid 3: input=0, output=0, feature=1 uhid4 at uhidev2 reportid 4: input=0, output=0, feature=1 uhid5 at uhidev2 reportid 16: input=0, output=0, feature=2 uhid6 at uhidev2 reportid 17: input=0, output=0, feature=16 uhid7 at uhidev2 reportid 19: input=0, output=0, feature=1 uhid8 at uhidev2 reportid 32: input=0, output=0, feature=1 uhid9 at uhidev2 reportid 33: input=0, output=0, feature=1 wsmouse1 detached ums1 detached uhid2 detached uhid3 detached uhid4 detached uhid5 detached uhid6 detached uhid7 detached uhid8 detached uhid9 detached uhidev2 detached OpenBSD 4.5-beta (GENERIC.MP) #2113: Thu Feb 19 16:38:47 MST 2009 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3488022528 (3326MB) avail mem = 3372261376 (3216MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0720 (74 entries) bios0: vendor American Megatrends Inc. version "1201" date 08/05/2008 bios0: ASUSTeK Computer INC. P5Q-E acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) EUSB(S4) USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, 2833.39 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR,NXE,LONG cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, 2833.02 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR,NXE,LONG cpu1: 6MB 64b/line 16-way L2 cache cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, 2833.01 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR,NXE,LONG cpu2: 6MB 64b/line 16-way L2 cache cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, 2833.02 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR,NXE,LONG cpu3: 6MB 64b/line 16-way L2 cache ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 20, 24 pins acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P2) acpiprt2 at acpi0: bus -1 (P0P3) acpiprt3 at acpi0: bus 5 (P0P1) acpiprt4 at acpi0: bus -1 (P0P5) acpiprt5 at acpi0: bus -1 (P0P6) acpiprt6 at acpi0: bus -1 (P0P7) acpiprt7 at acpi0: bus 3 (P0P8) acpiprt8 at acpi0: bus 2 (P0P9) acpiprt9 at acpi0: bus 4 (P0P4) acpicpu0 at acpi0 acpicpu1 at acpi0 acpicpu2 at acpi0 acpicpu3 at acpi0 acpibtn0 at acpi0: PWRB pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 4 int 16 (irq 10) pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x9490 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa38 rev 0x00: apic 4 int 17 (irq 11) azalia0: codecs: ATI/0xaa01 audio0 at azalia0 uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 4 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 4 int 21 (irq 14) uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 4 int 18 (irq 15) ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 4 int 18 (irq 15) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: apic 4 int 22 (irq 3) azalia1: codecs: Analog Devices/0x989b audio1 at azalia1 ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 4 int 17 (irq 11) pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 4 int 17 (irq 11) pci3 at ppb2 bus 3 pciide0 at pci3 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 16 (irq 10) for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb3 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 4 int 16 (irq 10) pci4 at ppb3 bus 2 mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x12, Yukon-2 EC Ultra (0x3): apic 4 int 17 (irq 11) msk0 at mskc0 port A: address 00:22:15:9c:87:7e eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 4 int 23 (irq 7) uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 4 int 19 (irq 5) uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 4 int 18 (irq 15) ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 4 int 23 (irq 7) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci5 at ppb4 bus 5 skc0 at pci5 dev 2 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x14, Yukon Lite (0x9): apic 4 int 18 (irq 15) sk0 at skc0 port A: address 00:22:15:9c:9d:b7 eephy1 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5 "AT&T/Lucent FW322 1394" rev 0x70 at pci5 dev 3 function 0 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 4 int 19 (irq 5) for native-PCI interrupt pciide1: channel 0 ignored (not responding; disabled or no drives?) atapiscsi0 at pciide1 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S223Q, SB02> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 4 int 18 (irq 15) iic0 at ichiic0 iic0: addr 0x1e 01=01 02=01 11=01 12=01 20=05 21=01 22=01 23=05 31=01 32=01 words 00=0001 01=0101 02=0100 03=0000 04=0000 05=0000 06=0000 07=0000 iic0: addr 0x20 01=80 02=17 03=7f 10=00 19=b0 20=20 21=00 25=20 26=b2 38=74 39=03 4a=64 6a=2c 78=02 79=08 7a=00 7b=00 7e=82 80=00 8b=40 8c=c8 96=5b 99=41 9a=98 9b=01 d0=00 d1=03 d2=72 d3=72 d4=03 d5=02 d6=01 d7=6b d8=6b d9=00 da=00 db=00 dc=00 dd=00 de=00 df=19 e0=00 e1=00 e2=10 e3=10 e4=10 e5=10 e6=10 e7=10 e8=10 e9=10 ea=10 ec=07 ee=00 f1=15 f5=02 f6=02 f9=00 fa=00 fb=50 words 00=ffff 01=8037 02=1766 03=7fff 04=ffff 05=ffff 06=ffff 07=ffff spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 4 int 19 (irq 5) for native-PCI interrupt wd0 at pciide2 channel 0 drive 0: <WDC WD1001FALS-00J7B0> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors pciide2: channel 1 ignored (not responding; disabled or no drives?) usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lm0 at isa0 port 0x290/8: W83627DHG fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 mtrr: Pentium Pro MTRR support umass0 at uhub4 port 1 configuration 1 interface 0 "Generic Mass Storage Device" rev 2.00/1.29 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable sd1: drive offline sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable sd2: drive offline sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable sd3: drive offline uhidev0 at uhub5 port 2 configuration 1 interface 0 "Composite USB PS2 Converter USB to PS2 Adaptor V3.10" rev 1.10/3.10 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 2 configuration 1 interface 1 "Composite USB PS2 Converter USB to PS2 Adaptor V3.10" rev 1.10/3.10 addr 2 uhidev1: iclass 3/1, 3 report ids ums0 at uhidev1 reportid 1: 5 buttons, Z dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 softraid0 at root root on wd0a swap on wd0b dump on wd0b -- Social sciences can never use experience to verify their statements -- Ludwig von Mises
