Very likely acpi or interrupt routing issues. Use 4.5-beta really.
On Fri, Feb 20, 2009 at 12:24:28AM -0500, David Heinrich wrote:
> I am trying to install OpenBSD 4.4 amd64 onto my system. I obtained
> the install CD ISO from
>
> ftp://ftp.openbsd.org/pub/OpenBSD/4.4/amd64/install44.iso
> and
> ftp://ftp.openbsd.org/pub/OpenBSD/4.4/amd64/cd44.iso
>
> (the same thing happens whether I use the full or mini boot CD made
> from those ISO files).
>
> If I boot from the CD, and let the CD auto-boot (or if I start typing
> when prompted with the "boot>" prompt and then type "boot"), it goes
> through the startup messages, and stalls at the "softraid0 at root"
> step. The boot hangs on "Softraid0 at root".
>
> I can't find information on this in the archives, and I have tried
> typing "disable softraid" and searching for how to disable softraid
> with no success. A friend suggested "boot -d" to boot in debugging
> mode, but this didn't give me any debugging options and just went
> through the normal boot, again stalling at softraid0. If this is
> something where the answer is online but I haven't been able to find
> it, please refer me to the site.
>
> If not, any ideas as to what I should I do? Should I file a bug report?
>
>
> THE LAST SCREEN I CAN SEE WHEN BOOTING:
>
> <QUOTE>
> vable
> sd0: drive offline
> sd1 at scsci bus2 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0
> 0/direct removable
> sd1: drive offline
> sd2 at scsibus2 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0
> 0/direct removable
> sd2: drive offline
> sd3 at scsibus2 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0
> 0/direct removable
> sd3: drive offline
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "Composite USB PS2
> Converter USB to PS2 Adapter V3.01" rev 1.10/3.10 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "Composite USB PS2
> Converter USB to PS2 Adapter V3.10" rev 1.10/3.10 addr 2
> uhidev1: icass 3/1, 3 report ids
> uhid at uhidev1 reportid 1 not configured
> uhid at uhidev1 reportid 2 not configured
> uhid at uhidev1 reportid 3 not configured
> softraid0 at root
> _
> </QUOTE>
>
> I have tested my computer with the FreeBSD/amd64 7.1 boot CD (not to
> ruffle any feathers, but just to see if it is something wrong with my
> computer, as I built it myself), and I got to the install menu for
> fBSD.
>
> I also downloaded the install45.iso from the snapshots ftp directory
> as of 02/19/2009 12:11:00 PM. That install ISO gets beyond the
> "softraid0 at root" (that line and prior is same as with 4.4), and
> gets to:
>
> <QUOTE>
> root on rd0a swap on rd0b dump on rd0b
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> (I)nstall, (U)pgrade or (S)hell?
> </QUOTE>
>
> It then says available disks are "wd0 sd0 sd1 sd2 sd3"; I presume the
> sd0 - sd3 are because of my CF card reader. However, I don't want to
> install the latest beta-versin of OpenBSD; but can I use the current
> ISO as a launch-platform for installing OpenBSD 4.4?
>
> My system setup is as follows (whenever possible, information is as
> displays in my v02.61 American Megatrends Bios).
>
> MY HARDWARE INFO:
>
> Motherboard : Asus Intel P45 1600 FSB 4x DDR2 Core 2 Duo ATX P5Q-E
> RAM : OCZ TechnologyDDR2 PC2-6400 800MHz 8GB Quad Kit (OCZ2G8008GQ)
> Hard Drive : 1TB WD1001FALS SATA 7200RPM 32MB HDD Bare drive
> CPU : INTEL Core 2 Quad Q9550 BX80569Q95502.83ghz
> GPU : MSI Radeon HD4670 PCIE-512MB DDR3 Dual VGA/DVI (R46702D512)
> PSU : 1050W Revolution 85+ PSU ATX12V Version 2.3 80PLUS Silver
> Monitor : Sony GDM-F520 (CRT)
> DVD Drive (Internal) : Samsung DVD Burner 22X SH-S223Q
> CF Reader : CARD READER ROSEWILL|RCR-102 RTL
> USB DVD Drive : a LaCie Lightscribe drive
>
>
> MY BIOS INFO
>
> Main
> ====
> SATA 1 : [Not Detected]
> SATA 2 : [Not Detected]
> SATA 3 : [Not Detected]
> SATA 4 : [TSSTcorp CDDVDW SH]
> SATA 5 : [WDC WD1001FALS-00J]
> SATA 6 : [Not Detected]
>
> Storage Configuration
> ---------------------
> SATA Configuration [Enhanced]
> Configure SATA as [IDE]
> Hard Disk Write protect [Enabled]
> IDE Detect Time Out (Sec) [35]
>
> System Information
> ------------------
> Bios Information
> Version : 1201
> Build Date: 08/05/08
>
> Processor
> Type : Intel(R) Core(TM)2 Quad CPU 9550 @ 2.83GHz
> Speed : 2833 MHz
> Count : 4
>
> System Memory:
> Usable Size : 8192MB
>
>
> Ai Tweaker
> ==========
>
> Ai Overclock Tuner [Auto]
> CPU Ratio Setting [Auto]
> FSB Strap to North Bridge [Auto]
> DRAM Frequency [Auto]
> DRAM CLK Skew on Channel A1 [Auto]
> DRAM CLK Skew on Channel A2 [Auto]
> DRAM CLK Skew on Channel B1 [Auto]
> DRAM CLK Skew on Channel B2 [Auto]
> DRAM Timing Control [Auto]
> 1st Information : 6-6-6-18-3-46-6-3
> 2nd Information : 8-3-6-4-6-4-6
> 3rd Information : 15-5-1-7-7
> DRAM Static Read Control [Auto]
> DRAM Read Training [Auto]
> MEM. OC Charger [Auto]
> Ai Clock Twister [Auto]
> Ai Transaction Booster [Auto]
> C/P : A1 A2 A3 A4 A5 | B1 B2 B3 B4 B5
> LVL : 11 11 11 11 11 | 11 11 11 11 11
>
> CPU Voltage [Auto]
> CPU GTL Voltage Reference(0/2) [Auto]
> CPU GTL Voltage Reference(1/3) [Auto]
> CPU PLL Voltage [Auto]
> FSB Termination Voltage [Auto]
> DRAM Voltage [Auto]
> NB Voltage [Auto]
> NB GTL Reference [Auto]
> SB Voltage [Auto]
> PCIE SATA Voltage [Auto]
>
> Load-Line Calibration [Auto]
> CPU Spread Spectrum [Auto]
> PCIE Spread Spectrum [Auto]
> CPU Clock Skew [Auto]
> NB Clock Skew [Auto]
> CPU Margin Enhancement [Optimized]
>
>
> Advanced
> ========
>
> Cpu Configuration
> -----------------
> Manufacturer : Intel
> Brand String : Intel(R) Core(TM)2 Quad CPU 9550 @ 2.83GHz
> Frequency : 2.83GHz
> FSB Speed: 1333MHz
> Cache L1: 128 KBhc
> Cache L2 : 12288 KB
> Ratio Status : Unlocked (Min:06, Max:08.5)
> Ratio Actual Value : 8.5
> CPUID : 1067A
>
> CPU Ratio Setting [Auto]
> C1E Support [Enabled]
> Max CPUID Value Limited [Disabled]
> Intel(R) Virtualization Tech [Enabled]
> CPU TM Function [Enabled]
> Execute Disable Bit [Enabled]
> Intel(R) SpeedStep(TM) Tech [Disabled]
> Intel(R) C-STATE Tech [Disabled]
>
> Chipset
> -------
> North Bridge Chipset Configuration
> Memory Remap Feature [Enabled]
> PCI MMIO Allocation : 4GB to 3328MB
> Memory Hole [Disabled]
>
> Initiate Graphic Driver [PEG/PCI]
>
> Onboard Devices Configuration
> -----------------------------
> High Definition Audio [Enabled]
> Front Panel Type [HD Audio]
> Marvell IDE [Enabled]
> Marvell IDE Boot ROM [Enabled]
> Marvell LAN1 [Enabled]
> LAN Boot ROM [Disabled]
> Marvell LAN2 [Enabled]
> LAN Boot ROM [Disabled]
> LAN Firewire 1394 [Enabled]
>
> Serial Port1 Address [3F8/IRQ4]
>
> USB CVonfiguration
> ------------------
> USB Devices Enabled :
> 1 Keyboard, 1 Mouse, 4 Drives
>
> USB Functions [Enabled]
> USB 2.0 Controller [Enabled]
> USB 2.0 Controller Mode [HiSpeed]
> BIOS EHCI Hand-Off [Enabled]
> Legacy USB Support [Auto]
>
> Advanced PCI/PnP Settings
> -------------------------
> Plug And Play O/S [No]
>
>
> Power
> =====
>
> Suspend Mode [Auto]
> Repost Video on S3 Resume [No]
> ACPI 2.0 Support [Disabled]
> ACPI APIC support [Enabled]
>
> APM Configuration
> -----------------
> Restore on AC Power Loss [Power Off]
>
> Power On By RTC Alarm [Disabled]
> Power On By External Modems [Disabled]
> Power On By PCI Devices [Disabled]
> Power On By PCIE Devices [Disabled]
> Power On By PS/2 Keyboard [Disabled]
>
> Energy Star 4.0C Support [Disabled]
>
>
> Power
> =====
>
> CPU Voltage [ 1.200V]
> 3.3V Voltage [ 3.312V]
> 5V Voltage [ 5.040V]
> 12V Voltage [ 12.096V]
>
> Boot
> ====
>
> Boot Device Priority
> --------------------
> 1st Boot Device [1st FLOPPY DRIVE]
> 2nd Boot Device [CRRM:SS-TSSTcorp ]
> 3rd Boot Device [SATA:3M-WDC WD1001]
>
> Boot Settings Configuration
> ---------------------------
> Quick Boot [Enabled]
> Full Screen Logo [Disabled]
> AddOn ROM Display Mode [Force BIOS]
> Bootup Num-Lock [On]
> Wait For 'F1' If Error [Enabled]
> Hit 'DEL' Message Display [Enabled]
>
>
> Security Settings
> =================
> Supervisor Password :Installed
> User Password :Not Installed
> User Access level [No Access]
> Password Check [Always]
>
>
> Tools
> =====
> Driver Xpert Control [Auto]
> Drive Xpert Mode Update [Last Setting]
>
> Express Gate [Enabled]
> Enter OS Timer [10 Seconds]
> Reset User Data [No]
