I am trying (again) to get wireless working with OpenBSD 4.4. Following are
/etc files and dmesg.
With "debug" entered into my /etc/hostname.bwi0, I get "sending probe_req
ff:ff:ff:ff:ff:ff" and then "bwi0: no network....sleeping"
Router is linksys wrt54g2 and card on laptop is broadcom 4318 11g. Router is
set up for wpa wpa2.
I can't get any type of connection at all.
Hope the info helps. I've tried every item in /etc/hostname.bwi0, plus not
using that file and just trying via ifconfig (as root) to set up connection
with no luck.
Here are the files:
# ifconfig bwi0
bwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:ce:49:a8:e1
groups: wlan
media: IEEE802.11 autoselect mode 11g (DS1 mode 11g)
status: no network
ieee80211: nwid xxxx chan 6 wpapsk 0xmynwkey wpaprotos wpa1,wpa2
wpaakms psk,802.1x wpaciphers tkip,ccmp wpagroupcipher tkip
inet6 fe80::216:ceff:fe49:a8e1%bwi0 prefixlen 64 scopeid 0x2
/etc/hostname.bwi0
dhcp
#dhcp NONE NONE NONE nwid xxxx mode 11g chan 6
#dhcp nwid xxxx nwkey 0xmynwkey
#dhcp nwid xxxx wpa wpapsk 0xmynwkey chan 6 up
#dhcp NONE NONE NONE chan 6 wpa wpapsk $(wpa-psk xxxx xxxxx) media autoselect
mode 11g up debug
#dhcp up chan 6 nwid xxxx wpa wpapsk $(wpa-psk xxxx xxxx) debug
/etc/mygate
192.168.1.1 ( I just tried with this set 3 or 4 times)
dmesg
OpenBSD 4.4-stable (GENERIC) #1: Mon Jan 19 16:25:07 MST 2009
r...@box.my.domain:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Sempron(tm) Processor 3100+ ("AuthenticAMD" 686-class, 256KB
L2 cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD erratum 89 present, BIOS upgrade may be required
real mem = 468217856 (446MB)
avail mem = 444178432 (423MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/20/06, BIOS32 rev. 0 @ 0xfd5f0, SMBIOS
rev. 2.31 @ 0x1befb000 (24 entries)
bios0: vendor Acer version "3A32" date 02/20/06
bios0: Acer, inc. Aspire 3000
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x8000!
cpu0 at mainbus0
cpu0: PowerNow! K8 1801 MHz: speeds: 1800 1600 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 760 PCI" rev 0x03
ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xe0000000, size 0x400000
drm at vga1 unsupported
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 760: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, CDRW/DVD SCB5265, TX07> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"SiS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 5, SiS7012 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9, version
1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11, version
1.0, legacy support
ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 3, address
00:16:36:3c:14:4a
rlphy0 at sis0 phy 13: RTL8201L 10/100 PHY, rev. 1
cbb0 at pci0 dev 6 function 0 "TI PCI1510 CardBus" rev 0x00: irq 3
bwi0 at pci0 dev 11 function 0 "Broadcom BCM4318" rev 0x02: irq 4, address
00:16:ce:49:a8:e1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask efcd netmask efdd ttymask ffdf
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
umass0 at uhub0 port 4 configuration 1 interface 0 "Memorex Flashdrive 601B"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Memorex, Flashdrive 601B, PMAP> SCSI0 0/direct
removable
sd0: 477MB, 60 cyl, 255 head, 63 sec, 512 bytes/sec, 977664 sec total
I hope this is enough info.
Thanks.
Mike
