Greetings, previous snapshots were able to boot with no issues. I'm using GENERIC.MP, and the panic occurs when using GENERIC.SP.
here is the panic message: (typed) <dmesg output> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uvm_fault(0xd080c660, 0x12e52000, 0, 3) -> e kernel: page fault trap, code=0 stopped at apic_vectorset+0x50: movl %esi,apic_maxlevel(,%eax,4) apic_vectorset(d3f1d800,0,ff,0,0) at apic_vectorset+0x50 ioapic_enable(d080c660,0,d0965fa0,d034d1a3,d08c1720) at ioapic_enable+0x8f cpu_configure(d08c1720,1,3,0,2) at cpu_configure+0x42 main(0,0,0,0,0) at main+0x3a7 I do not have my pci serial port card yet (comes in Tuesday..., so I took screenshots of the dmesg, PS and TRACE. here is the *typed* output of trace: ddb(0)>trace apic_vectorset(d3f1d800,0,ff,0,0) at apic_vectorset+0x50 ioapic_enable(d080c660,0,d0965fa0,d034d1a3,d08c1720) at ioapic_enable+0x8f cpu_configure(d08c1720,1,3,0,2) at cpu_configure+ ps output can be found here: (until I get my serial port card, this is the best I can do.) http://picasaweb.google.com/lh/photo/l7IN31cOVXa1y8yn74aA8w?feat=directlink link to the dmesg, ps, and trace can be found in this album: http://picasaweb.google.com/brakeb/CrashUsing08jan2009Snapshot?feat=directlink please advise. I originally thought that this panic was due to the re(4) that was not reset. I can reproduce this. I first received this error right after I did the 08 jan 2009 snapshot. I did mention this earlier to the list, and was told by theo that the 06 jan snapshot would fix this, and it did seem to fix this, and I was able to even use re(4). To reproduce the re(4) error, I can boot into Vista, shutdown, and boot into OpenBSD. After the panic, I hold the power button for 4 seconds, and then boot back up. the error goes away, as you can see at the bottom of picture number 4. but it still panics, now on something else. I am unable to get to a login, so I can't do patches. I can wait for snapshots. I apologize for the "stream of consciousness", I just want to make sure that any questions that anyone might have are answered... Regards, Bryan Brake
