Greetings,
I am installing i386 -current on my new box, and I've come into a
panic on startup. Installation via tftp went without a hitch using
"re0" to install. After installation, upon start-up, I receive the
following:
mtrr: Pentium Pro MTRR support
panic: config_detach: forced detach of re0 failed (45)
Stopped at Debugger+0x4: leave
I can't give you more than that because the USB quits working at that
point and I'm forced to hard shutdown. After this occurred, I went to
UKC> and set "disable re", and the system was able to boot.
I'm running GENERIC.MP, and have tried booting GENERIC.SP, but it also
panics at the same point. Once started up, I also cannot get the zyd0
USB wireless nic to connect to my wpa2 network. It works fine and can
connect when using That Other OS. Fortunately, I've a rum(4) that
works flawlessly.
I'm subscribed to the list. please ask questions. This is more of a
nuisance, since I've installed the OS, I can use wireless to connect
to the internet. But I looked in my mail archive in the last year or
so, and have not seen anything like the problem I'm having... hell,
this box doesn't even have a serial port... :(
Regards,
Bryan
Here is a dmesg with the re(4) nic disabled:
OpenBSD 4.4-current (GENERIC.MP) #20: Wed Dec 24 01:56:16 MST 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3488833536 (3327MB)
avail mem = 3384791040 (3227MB)
User Kernel Config
UKC> disable re
111 re* disabled
112 re* disabled
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/07/08, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.5 @ 0xf06e0 (54 entries)
bios0: vendor American Megatrends Inc. version "5.33" date 11/07/2008
bios0: HP-Pavilion FK484AV-ABA m9400t
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) USB0(S3)
USB1(S3) USB2(S3) USB5(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3)
GBE_(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 3 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus 2 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe200
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq 5)
pci1 at ppb0 bus 5
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x06e0 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4
int 16 (irq 5)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4
int 21 (irq 3)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4
int 18 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4
int 17 (irq 11)
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 vendor "Creative Labs", unknown product
0x7006 rev 0x00
pci3 at ppb2 bus 4
azalia0 at pci3 dev 0 function 0 vendor "Creative Labs", unknown
product 0x0009 rev 0x00: apic 4 int 16 (irq 5)
azalia0: codecs: Creative Labs/0x000a
audio0 at azalia0
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4
int 18 (irq 10)
pci4 at ppb3 bus 2
"Realtek 8168" rev 0x02 at pci4 dev 0 function 0 not configured
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4
int 23 (irq 14)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4
int 19 (irq 15)
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4
int 18 (irq 10)
uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 4
int 16 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4
int 23 (irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4
int 19 (irq 15), AHCI 1.2
scsibus0 at ahci0: 32 targets, initiator 32
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200AAJS-6, 01.0> SCSI3 0/direct fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
cd0 at scsibus0 targ 1 lun 0: <ATAPI, DVD A DH16A6L-C, ZHCD> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
4 int 18 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
zyd0 at uhub0 port 3 configuration 1 interface 0 "ZyDAS USB2.0 WLAN"
rev 2.00/48.02 addr 2
umass0 at uhub1 port 5 configuration 1 interface 0 "Generic
USB2.0-CRW" rev 2.00/51.95 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0
0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd3: drive offline
sd4 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0
0/direct removable
sd4: drive offline
uhidev0 at uhub1 port 5 configuration 1 interface 1 "Generic
USB2.0-CRW" rev 2.00/51.95 addr 2
uhidev0: iclass 3/0
uhid0 at uhidev0: input=1, output=0, feature=0
uhidev1 at uhub7 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 1.10/38.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 1.10/38.10 addr 2
uhidev2: iclass 3/1, 17 report ids
ums0 at uhidev2 reportid 2: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid1 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid2 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
zyd0: HMAC ZD1211, FW 46.05, RF AL2230, PA 0, address 00:02:72:52:4a:1f
