I am running 4.4 stable on i386 for the sole purpose of running nagios.
So that I could get visualizations on the statusmap, nagios docs say that
gd is required.
I have performed just a minimal install, bsd, base44, etc44 and man44.
When i try installing gd i come up with the following error:
# pkg_add -nv gd
parsing gd-2.0.35
Dependencies for gd-2.0.35 resolve to: libiconv-1.12, jpeg-6bp3,
png-1.2.28 (todo: jpeg-6bp3,png-1.2.28)
gd-2.0.35:parsing jpeg-6bp3
found libspec c.48.0 in /usr/lib
Pretending to add gd-2.0.35:jpeg-6bp3
gd-2.0.35:parsing png-1.2.28
Pretending to add gd-2.0.35:png-1.2.28
found libspec c.48.0 in /usr/lib
found libspec expat.9.0 in /usr/lib
Can't install gd-2.0.35: lib not found fontconfig.5.1
Dependencies for gd-2.0.35 resolve to: libiconv-1.12, jpeg-6bp3,
png-1.2.28 (todo: jpeg-6bp3,png-1.2.28)
Full dependency tree is libiconv-1.12,jpeg-6bp3,png-1.2.28
Can't install gd-2.0.35: lib not found freetype.16.1
found libspec iconv.5.0 in package libiconv-1.12
found libspec jpeg.62.0 in package jpeg-6bp3
found libspec m.3.0 in /usr/lib
found libspec png.7.0 in package png-1.2.28
found libspec z.4.1 in /usr/lib
/dev/wd0g: 1432 bytes
/dev/wd0f: 1381968 bytes
I did some searching on this and found it most recently referenced about
Openbsd 3.9 where people were indicating that gd was not going to have the
x dependency in future releases.
I have another machine that i did my nagios testing on that does NOT have
gd installed but the .gd2 icons are displayed correctly in the statusmap.
I do have php5-gd installed and doing a test install of php5-gd-no_x11
which works. My question here is, even though nagios doesn't use php, is
the php-gd what is allowing the icons to display in this case since i
don't actually have gd installed?
Is there any other way to make this work? i didn't really want to install
php or xbase on this box.
Thanks in advance and dmesg below.
Aaron Martinez
OpenBSD 4.4-stable (GENERIC) #1: Fri Dec 5 15:52:41 CST 2008
r...@obsdbuild.minn.example.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 527986688 (503MB)
avail mem = 502087680 (478MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/10/03, BIOS32 rev. 0 @ 0xeb4e0,
SMBIOS rev. 2.3 @ 0xf8dd4 (57 entries)
bios0: vendor Hewlett-Packard version "786B2 v1.11" date 07/10/2003
bios0: Hewlett-Packard HP d530 SFF(DG781A)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT SSDT SSDT APIC SSDT ASF!
SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S4) HUB_(S4) COM1(S4) COM2(S4) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) EUSB(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (HUB_)
acpicpu0 at acpi0
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xa600 0xca600/0x2000 0xe0c00/0x9a00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xf0000000, size 0x8000000
drm at vga1 unsupported
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 5
bge0 at pci1 dev 2 function 0 "Broadcom BCM5782" rev 0x03, BCM5705 A3
(0x3003): irq 5, address 00:0e:7f:f3:46:a7
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN486S, YQSM> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 5,
ICH5 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fde5 netmask fde5 ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "ATEN UC-10KM
V1.3.121" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 3
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "ATEN UC-10KM
V1.3.121" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
