Hi all!
I'd like to install OpenBSD 4.4 on my Acer Aspire 3630 laptop, but bsd.rd
stops with "rd0: fixed, 3800 blocks". I tried to disable rd0
or softraid with UKC (also usb -- you know, blind shot), but it won't
work. 4.4 and 4.3 bsd kernels stops at "mtrr: Pentium MTRR support"
(something like this -- possible typing mistakes), but 4.3 bsd.rd boots
properly and goes to install stage. Installed system can't boot, 'cause of
MTRR... I'm using various versions of OBSD on several machines, but that
is first problem that I'm unable to solve by myself using manuals or
Google.
I also looked into laptop's BIOS, but there's absolutely nothing to
configure :-/
I can include dmesg output from 4.3, I hope it can be helpful, 4.4 doesn't
give me any chance to save dmesg :)
Please give me any advices, thanks in advance.
OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.51
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 500723712 (477MB)
avail mem = 477913088 (455MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/20/06, BIOS32 rev. 0 @ 0xfd600, SMBIOS
rev. 2.31 @ 0x1ddfb000 (35 entries)
bios0: vendor Acer version "3A22" date 03/20/06
bios0: Acer, inc. Aspire 3630
acpi0 at bios0: rev 0, can't enable ACPI
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 661 PCI" rev 0x11
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 661: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD600UE-22HCT0>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, DVD+-RW SDVD8441, P646> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"SiS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
"SiS 7012 AC97" rev 0xa0 at pci0 dev 2 function 7 not configured
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9, version
1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11, version
1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: couldn't map
interrupt
cbb0 at pci0 dev 6 function 0 "ENE CB-1410 CardBus" rev 0x01: couldn't map
interrupt
"Broadcom BCM4318" rev 0x02 at pci0 dev 11 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub0 port 5 configuration 1 interface 0 "TOSHIBA TransMemory" rev
2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <TOSHIBA, TransMemory, 5.00> SCSI0 0/direct
removable
sd0: 1911MB, 243 cyl, 255 head, 63 sec, 512 bytes/sec, 3914752 sec total
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub0 port 5 configuration 1 interface 0 "TOSHIBA TransMemory" rev
2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <TOSHIBA, TransMemory, 5.00> SCSI0 0/direct
removable
sd0: 1911MB, 243 cyl, 255 head, 63 sec, 512 bytes/sec, 3914752 sec total
