On Wed, Dec 3, 2008 at 12:55 AM, Dan Harnett <[EMAIL PROTECTED]> wrote:
> On Wed, Dec 03, 2008 at 12:12:48AM +0100, Mattieu Baptiste wrote:
> >
> > You can imagine that if I had the oportunity to do something on the
> console,
> > I would have already done that.
>
> You'd be surprised.
>
> > The point is the screen goes black and the only solution I have is to
> reboot
> > the machine. oga@ suggested me to ask if other people with a proper
> serial
> > console can reproduce the problem.
>
> You failed to mention this in your first post.
>
> > That is the reason I ask misc.
>
> How up to date is your source tree? You said you've had this problem
> for a few days. Have you updated since a few days ago? There have been
> several fixes for radeons. Did you try a kernel with drm and radeondrm
> disabled to see if it makes any difference? Did you try backing out any
> source to an earlier version to narrow down what change could have broke
> this? Does dropping kqemu change anything?
>
> > > You can try `boot reboot`, or `boot dump`, either might give you
> > > information, but its not guarenteed.
> >
> > Thanks for the suggestion Peter but it doesn't change anything. The
> machine
> > has no reaction.
>
> Well, you should notice the hard drive light go solid with a 'boot
> dump'. That is if you have enough space. It will take a while as you
> have quite a bit of memory. Besides the light, the machine will appear
> to be doing nothing. I would suggest hitting enter before typing 'boot
> dump' incase there is any garbage input on the console. You're also
> typing blind. Don't assume that you're in DDB or that DDB is behaving
> nicely.
Ok, I have more details. I have disabled the kqemu module, and updated my
tree just in case. Now my system is -current from today (2008/12/03).
I use kdm to launch xfce. To exit X and shut down the machine, I use the
xfce.
When I shutdown the machine after some minutes of uptime, everything is
fine. If I let the machine running for some hours, when I want to shut it
down, X crashes.
I can't ssh to it. I tried a blind "boot dump", here is the output. If I run
"ps" and "trace" blindly, does the errors will be written in
/var/log/messages ?
Thanks,
Dec 3 00:59:35 freekc /bsd: OpenBSD 4.4-current (GENERIC) #36: Wed Dec 3
00:38:24 CET 2008
Dec 3 00:59:35 freekc /bsd: [EMAIL PROTECTED]:
/usr/src/sys/arch/i386/compile/GENERIC
Dec 3 00:59:35 freekc /bsd: cpu0: Intel(R) Pentium(R) M processor 1.86GHz
("GenuineIntel" 686-class) 1.87 GHz
Dec 3 00:59:35 freekc /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
Dec 3 00:59:35 freekc /bsd: real mem = 1005023232 (958MB)
Dec 3 00:59:35 freekc /bsd: avail mem = 963420160 (918MB)
Dec 3 00:59:35 freekc /bsd: mainbus0 at root
Dec 3 00:59:35 freekc /bsd: bios0 at mainbus0: AT/286+ BIOS, date 08/21/06,
BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries)
Dec 3 00:59:35 freekc /bsd: bios0: vendor IBM version "1YET65WW (1.29 )"
date 08/21/2006
Dec 3 00:59:35 freekc /bsd: bios0: IBM 2668WEV
Dec 3 00:59:35 freekc /bsd: apm0 at bios0: Power Management spec V1.2
Dec 3 00:59:35 freekc /bsd: apm0: battery life expectancy 99%
Dec 3 00:59:35 freekc /bsd: apm0: AC on, battery charge high
Dec 3 00:59:35 freekc /bsd: acpi at bios0 function 0x0 not configured
Dec 3 00:59:35 freekc /bsd: pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
Dec 3 00:59:35 freekc /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xfdeb0/256 (14 entries)
Dec 3 00:59:35 freekc /bsd: pcibios0: PCI Interrupt Router at 000:31:0
("Intel 82371FB ISA" rev 0x00)
Dec 3 00:59:35 freekc /bsd: pcibios0: PCI bus #12 is the last bus
Dec 3 00:59:35 freekc /bsd: bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600
0xd1800/0x1000 0xdc000/0x4000! 0xe0000/0x10000
Dec 3 00:59:35 freekc /bsd: cpu0 at mainbus0: (uniprocessor)
Dec 3 00:59:36 freekc /bsd: cpu0: Enhanced SpeedStep 1867 MHz (1308 mV):
speeds: 1867, 1600, 1333, 1067, 800 MHz
Dec 3 00:59:36 freekc /bsd: pci0 at mainbus0 bus 0: configuration mode 1
(bios)
Dec 3 00:59:36 freekc /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82915GM
Host" rev 0x03
Dec 3 00:59:36 freekc /bsd: ppb0 at pci0 dev 1 function 0 "Intel 82915GM
PCIE" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: pci1 at ppb0 bus 1
Dec 3 00:59:36 freekc /bsd: vga1 at pci1 dev 0 function 0 "ATI Radeon
Mobility M300 M22" rev 0x00
Dec 3 00:59:36 freekc /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
Dec 3 00:59:36 freekc /bsd: wsdisplay0: screen 1-5 added (80x25, vt100
emulation)
Dec 3 00:59:36 freekc /bsd: radeondrm0 at vga1
Dec 3 00:59:36 freekc /bsd: drm0 at radeondrm0
Dec 3 00:59:36 freekc /bsd: ppb1 at pci0 dev 28 function 0 "Intel 82801FB
PCIE" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: pci2 at ppb1 bus 2
Dec 3 00:59:36 freekc /bsd: bge0 at pci2 dev 0 function 0 "Broadcom
BCM5751M" rev 0x11, BCM5750 B1 (0x4101): irq 11, address 00:11:25:d3:54:2c
Dec 3 00:59:36 freekc /bsd: brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT
PHY, rev. 0
Dec 3 00:59:36 freekc /bsd: ppb2 at pci0 dev 28 function 2 "Intel 82801FB
PCIE" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: pci3 at ppb2 bus 3
Dec 3 00:59:36 freekc /bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801FB
USB" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801FB
USB" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801FB
USB" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: uhci3 at pci0 dev 29 function 3 "Intel 82801FB
USB" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801FB
USB" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: usb0 at ehci0: USB revision 2.0
Dec 3 00:59:36 freekc /bsd: uhub0 at usb0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
Dec 3 00:59:36 freekc /bsd: ppb3 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0xd3
Dec 3 00:59:36 freekc /bsd: pci4 at ppb3 bus 11
Dec 3 00:59:36 freekc /bsd: cbb0 at pci4 dev 0 function 0 "Ricoh 5C476
CardBus" rev 0x8d: irq 11
Dec 3 00:59:36 freekc /bsd: iwi0 at pci4 dev 2 function 0 "Intel
PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:12:f0:dc:3d:69
Dec 3 00:59:36 freekc /bsd: cardslot0 at cbb0 slot 0 flags 0
Dec 3 00:59:36 freekc /bsd: cardbus0 at cardslot0: bus 12 device 0
cacheline 0x0, lattimer 0xb0
Dec 3 00:59:36 freekc /bsd: pcmcia0 at cardslot0
Dec 3 00:59:36 freekc /bsd: auich0 at pci0 dev 30 function 2 "Intel 82801FB
AC97" rev 0x03: irq 11, ICH6 AC97
Dec 3 00:59:36 freekc /bsd: ac97: codec id 0x41445374 (Analog Devices
AD1981B)
Dec 3 00:59:36 freekc /bsd: ac97: codec features headphone, 20 bit DAC, No
3D Stereo
Dec 3 00:59:36 freekc /bsd: audio0 at auich0
Dec 3 00:59:36 freekc /bsd: "Intel 82801FB Modem" rev 0x03 at pci0 dev 30
function 3 not configured
Dec 3 00:59:36 freekc /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel
82801FBM LPC" rev 0x03: PM disabled
Dec 3 00:59:36 freekc /bsd: pciide0 at pci0 dev 31 function 2 "Intel
82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1
wired to compatibility
Dec 3 00:59:36 freekc /bsd: wd0 at pciide0 channel 0 drive 0:
<HTS541080G9AT00>
Dec 3 00:59:36 freekc /bsd: wd0: 16-sector PIO, LBA, 76319MB, 156301488
sectors
Dec 3 00:59:36 freekc /bsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA
mode 5
Dec 3 00:59:36 freekc /bsd: atapiscsi0 at pciide0 channel 1 drive 0
Dec 3 00:59:36 freekc /bsd: scsibus0 at atapiscsi0: 2 targets, initiator 7
Dec 3 00:59:36 freekc /bsd: cd0 at scsibus0 targ 0 lun 0: <MATSHITA,
DVD-RAM UJ-822S, 1.61> ATAPI 5/cdrom removable
Dec 3 00:59:36 freekc /bsd: cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA
mode 2
Dec 3 00:59:36 freekc /bsd: ichiic0 at pci0 dev 31 function 3 "Intel
82801FB SMBus" rev 0x03: irq 11
Dec 3 00:59:36 freekc /bsd: iic0 at ichiic0
Dec 3 00:59:36 freekc /bsd: usb1 at uhci0: USB revision 1.0
Dec 3 00:59:36 freekc /bsd: uhub1 at usb1 "Intel UHCI root hub" rev
1.00/1.00 addr 1
Dec 3 00:59:36 freekc /bsd: usb2 at uhci1: USB revision 1.0
Dec 3 00:59:36 freekc /bsd: uhub2 at usb2 "Intel UHCI root hub" rev
1.00/1.00 addr 1
Dec 3 00:59:36 freekc /bsd: usb3 at uhci2: USB revision 1.0
Dec 3 00:59:36 freekc /bsd: uhub3 at usb3 "Intel UHCI root hub" rev
1.00/1.00 addr 1
Dec 3 00:59:36 freekc /bsd: usb4 at uhci3: USB revision 1.0
Dec 3 00:59:36 freekc /bsd: uhub4 at usb4 "Intel UHCI root hub" rev
1.00/1.00 addr 1
Dec 3 00:59:36 freekc /bsd: isa0 at ichpcib0
Dec 3 00:59:36 freekc /bsd: isadma0 at isa0
Dec 3 00:59:36 freekc /bsd: com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16
byte fifo
Dec 3 00:59:36 freekc /bsd: com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16
byte fifo
Dec 3 00:59:36 freekc /bsd: pckbc0 at isa0 port 0x60/5
Dec 3 00:59:36 freekc /bsd: pckbd0 at pckbc0 (kbd slot)
Dec 3 00:59:36 freekc /bsd: pckbc0: using irq 1 for kbd slot
Dec 3 00:59:36 freekc /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
Dec 3 00:59:36 freekc /bsd: pms0 at pckbc0 (aux slot)
Dec 3 00:59:36 freekc /bsd: pckbc0: using irq 12 for aux slot
Dec 3 00:59:36 freekc /bsd: wsmouse0 at pms0 mux 0
Dec 3 00:59:36 freekc /bsd: pcppi0 at isa0 port 0x61
Dec 3 00:59:36 freekc /bsd: midi0 at pcppi0: <PC speaker>
Dec 3 00:59:36 freekc /bsd: spkr0 at pcppi0
Dec 3 00:59:36 freekc /bsd: lpt2 at isa0 port 0x3bc/4: polled
Dec 3 00:59:36 freekc /bsd: aps0 at isa0 port 0x1600/31
Dec 3 00:59:36 freekc /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID;
using exception 16
Dec 3 00:59:36 freekc /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Dec 3 00:59:36 freekc /bsd: biomask efe5 netmask efe5 ttymask ffff
Dec 3 00:59:36 freekc /bsd: mtrr: Pentium Pro MTRR support
Dec 3 00:59:36 freekc /bsd: umass0 at uhub0 port 3 configuration 1
interface 0 "Maxtor OneTouch" rev 2.00/2.00 addr 2
Dec 3 00:59:36 freekc /bsd: umass0: using SCSI over Bulk-Only
Dec 3 00:59:36 freekc /bsd: scsibus1 at umass0: 2 targets, initiator 0
Dec 3 00:59:36 freekc /bsd: sd0 at scsibus1 targ 1 lun 0: <Maxtor,
OneTouch, 0201> SCSI0 0/direct fixed
Dec 3 00:59:36 freekc /bsd: sd0: 194480MB, 512 bytes/sec, 398295040 sec
total
Dec 3 00:59:36 freekc /bsd: ugen0 at uhub3 port 2 "STMicroelectronics
Biometric Coprocessor" rev 1.00/0.01 addr 2
Dec 3 00:59:36 freekc /bsd: uhidev0 at uhub2 port 2 configuration 1
interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/22.00 addr 2
Dec 3 00:59:36 freekc /bsd: uhidev0: iclass 3/1
Dec 3 00:59:37 freekc /bsd: ums0 at uhidev0: 8 buttons, Z dir
Dec 3 00:59:37 freekc /bsd: wsmouse1 at ums0 mux 0
Dec 3 00:59:37 freekc /bsd: softraid0 at root
Dec 3 00:59:37 freekc /bsd: root on wd0a swap on wd0b dump on wd0b
Dec 3 00:59:36 freekc savecore: no core dump
Dec 3 00:59:40 freekc /bsd: auich0: measured ac97 link rate at 47993 Hz,
will use 48000 Hz
Dec 3 00:59:40 freekc apmd: battery status: high. external power status:
connected. estimated battery life 99%
Dec 3 00:59:45 freekc kdm_config[28296]: No XDMCP requests will be granted
Dec 3 00:59:52 freekc /bsd: radeondrm0: Setting GART location based on new
memory map
Dec 3 00:59:52 freekc /bsd: radeondrm0: Loading R300 Microcode
Dec 3 00:59:52 freekc /bsd: radeondrm0: writeback test succeeded in 1 usecs
Dec 3 00:59:59 freekc kdm: :0[22024]: Can't execute
"/usr/local/share/config/kdm/Xsetup": No such file or directory
Dec 3 01:00:01 freekc syslogd: restart
Dec 3 01:00:07 freekc kdm: :0[16175]: Can't execute
"/usr/local/share/config/kdm/Xstartup": No such file or directory
Dec 3 01:03:24 freekc gconfd (mattieu-21025): starting (version 2.22.0),
pid 21025 user 'mattieu'
Dec 3 01:03:25 freekc gconfd (mattieu-21025): Resolved address
"xml:readwrite:/home/mattieu/.gconf" to a writable configuration source at
position 0
Dec 3 20:00:01 freekc syslogd: restart
Dec 3 20:02:47 freekc kdm: :0[1304]: Can't execute
"/usr/local/share/config/kdm/Xreset": No such file or directory
Dec 3 20:02:47 freekc /bsd: uvm_fault(0xd07edc40, 0xdce33000, 0, 3) -> e
Dec 3 20:02:48 freekc /bsd: kernel: page fault trap, code=0
Dec 3 20:02:49 freekc /bsd: Stopped at radeon_cp_dispatch_flip+0xd6:
movl $0x5c8,0(%edi,%ecx,4)
Dec 4 20:02:49 freekc /bsd: ddb> ddb> syncing disks...
--
Mattieu Baptiste
"/earth is 102% full ... please delete anyone you can."
