I mailed this to Aaron offlist, but he suggested that someone else may have more to say about. So, I thought I'd send it on. The message I'm responding to is below mine. It merely indicates that his Atheros 5424 chipset works.
On Thu, Nov 20, 2008 at 8:49 PM, Neal Hogan <[EMAIL PROTECTED]> wrote: > Hello Mr. Hsu, > > I'm running -current, as well (amd64 -- 11/14) and my wifi is not > working (i get a *HAL unable to reset hardware* error). Can you send me your > dmesg and/or set me on the right path? Below is the output of *ifconfig* and > my dmesg. Thanks! > > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33160 > groups: lo > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > ath0: flags=8823<UP,BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:22:69:86:96:77 > groups: wlan > media: IEEE802.11 autoselect > status: no network > > ieee80211: nwid "" > inet6 fe80::222:69ff:fe86:9677%ath0 prefixlen 64 scopeid 0x1 > enc0: flags=0<> mtu 1536 > rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:1c:f0:bf:07:57 > > groups: egress > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet6 fe80::21c:f0ff:febf:757%rl0 prefixlen 64 scopeid 0x4 > inet 192.168.1.66 netmask 0xffffff00 broadcast 192.168.1.255 > > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33160 > groups: pflog > > > > > OpenBSD 4.4-current (GENERIC.MP) #1985: Fri Nov 14 09:36:10 MST 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > real mem = 2058207232 (1962MB) > avail mem = 1998217216 (1905MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (74 entries) > bios0: vendor LENOVO version "7UET43WW (1.13 )" date 08/19/2008 > > > bios0: LENOVO 7417CTO > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA > SSDT SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) > EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) > USB4(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4) > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.35 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG > > > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: apic clock running at 266MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG > > > cpu1: 3MB 64b/line 8-way L2 cache > ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 2, remapped to apid 1 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > > > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus -1 (EXP2) > acpiprt5 at acpi0: bus 5 (EXP3) > acpiprt6 at acpi0: bus 13 (EXP4) > acpiprt7 at acpi0: bus 21 (PCI1) > > > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2 > acpicpu1 at acpi0: C3, C2 > acpitz0 at acpi0: critical temperature 127 degC > acpitz1 at acpi0: critical temperature 100 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > > > acpibat0 at acpi0: BAT0 model "42T5225" serial 3388 type LION oem "Panasonic" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock at acpi0 not configured > > > acpivideo at acpi0 not configured > acpivideo at acpi0 not configured > cpu0: unknown i686 model 7, can't get bus clockcpu0: EST: unknown system bus > clock > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > > > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp at vga1 not configured > > > inteldrm0 at vga1:couldn't find agp > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured > "Intel ICH9 IGP M AMT" rev 0x03 at pci0 dev 25 function 0 not configured > > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 > (irq 11) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 > (irq 11) > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 > (irq 11) > > > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 > (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 > int 17 (irq 11) > > > azalia0: codecs: Conexant/0x5051 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 > (irq 11) > pci1 at ppb0 bus 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21 > (irq 11) > > > pci2 at ppb1 bus 3 > ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 (irq > 11) > ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:22:69:86:96:77 > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23 > (irq 11) > > > pci3 at ppb2 bus 5 > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 > (irq 11) > pci4 at ppb3 bus 13 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 > (irq 11) > > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 > (irq 11) > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > (irq 11) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 > (irq 11) > > > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci5 at ppb4 bus 21 > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 > (irq 11) > > > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > > > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 16 > (irq 11), AHCI 1.2 > scsibus0 at ahci0: 32 targets, initiator 32 > sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS72201, DCDZ> SCSI3 0/direct > fixed > > > sd0: 152627MB, 512 bytes/sec, 312581808 sec total > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, RW/DVD MU10N, 1.05> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int > 23 (irq 11) > > > iic0 at ichiic0 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > > > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > > > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > mtrr: Pentium Pro MTRR support > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > rl0 at cardbus0 dev 0 function 0 "D-Link Systems DFE-690TXD" rev 0x10: irq > 11, address 00:1c:f0:bf:07:57 > > > rlphy0 at rl0 phy 0: RTL internal PHY > umass0 at uhub0 port 1 configuration 1 interface 0 "Memorex TD CLASSIC 003B" > rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > > > sd1 at scsibus1 targ 1 lun 0: <Memorex, TD CLASSIC 003B, PMAP> SCSI0 0/direct > removable > sd1: 246MB, 512 bytes/sec, 503808 sec total > > > > > On Thu, Nov 20, 2008 at 7:40 PM, Aaron W. Hsu <[EMAIL PROTECTED]> wrote: > >> On Thu, 20 Nov 2008 20:14:32 -0500 >> "Aaron W. Hsu" <[EMAIL PROTECTED]> wrote: >> >> > On Thu, 20 Nov 2008 13:46:08 -0800 (PST) >> > jimerickso <[EMAIL PROTECTED]> wrote: >> > >> > > does openbsd current have support for the atheros 5424 wireless >> chipset? >> > >> > I currently have a Macbook Pro with an Atheros AR5424 chip, and it >> > works pretty well. >> > >> > ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 >> (irq 11) >> > ath0: AR5424 10.3 phy 6.1 rf 10.2, WOR5_ETSIC, address 00:17:f2:50:dd:64 >> >> I should have mentioned that I am running -Current, but I thought that >> this was already in 4.4. >> >> -- >> Aaron W. Hsu <[EMAIL PROTECTED]> | <http://www.sacrideo.us> >> "Government is the great fiction, through which everybody endeavors to >> live at the expense of everybody else." -- Frederic Bastiat >> +++++++++++++++ ((lambda (x) (x x)) (lambda (x) (x x))) ++++++++++++++ >> >> > > > -- > www.nealhogan.net > -- www.nealhogan.net
