On Thu, Oct 23, 2008 at 4:14 PM, Prabhu Gurumurthy <[EMAIL PROTECTED]> wrote:
> I installed 4.4 (current) on Dell 2950, dmesg at the bottom, I am having
> trouble seeing the Intel quad port PRO/1000 QP card in OpenBSD.
>
> When I look into /usr/src/sys/dev/pci/{pcidevs, pcidevs.h} I see that the
> chipset is listed, Does it require a firmware of some sort, because em(4)
> does not list this chipset, however it lists the card, which implies this
> card has more chipsets.
>
> In pcidevs.h:
> #define PCI_PRODUCT_INTEL_82575GB_QUAD_CPR 0x10d6 /* PRO/1000 QP
> (82575GB) */
try patch it in to sys/dev/pci/if_em.c, there's a big table near the
top of this file listing all the devices the driver supports... this
might work, or it might need something else (like the em variant found
in lenovo X200's)
> As I side note, this system has 32G of memory, any chance it would work? I
> can only see 3GB maximum on 4.3/amd64 mp kernel.
this has already been discussed this month. the answers you seek are
in the archives.
> Thanks!
>
> dmesg:
>
> OpenBSD 4.4-current (GENERIC.MP) #947: Tue Oct 21 16:00:28 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.67
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> real mem = 2142142464 (2042MB)
> avail mem = 2062811136 (1967MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/29/08, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS
> rev. 2.5 @ 0x7fb9c000 (67 entries)
> bios0: vendor Dell Inc. version "2.3.1" date 04/29/2008
> bios0: Dell Inc. PowerEdge 2950
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ
> TCPA
> acpi0: wakeup devices PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 332MHzcpu1 at mainbus0: apid 4 (application
> processor)
> cpu1: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPRcpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu4:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu5 at mainbus0: apid 5 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu5:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> cpu6 at mainbus0: apid 3 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu6:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz ("GenuineIntel" 686-class) 2.66
> GHz
> cpu7:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 8
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)acpiprt1 at acpi0: bus 4 (PEX2)
> acpiprt2 at acpi0: bus 5 (UPST)
> acpiprt3 at acpi0: bus 6 (DWN1)
> acpiprt4 at acpi0: bus 8 (DWN2)
> acpiprt5 at acpi0: bus 1 (PEX3)
> acpiprt6 at acpi0: bus 0 (PE2P)
> acpiprt6: no apic found for irq 64
> acpiprt6: no apic found for irq 65
> acpiprt6: no apic found for irq 78
> acpiprt7 at acpi0: bus 13 (PEX4)
> acpiprt8 at acpi0: bus 15 (PEX6)
> acpiprt9 at acpi0: bus 2 (SBEX)
> acpiprt10 at acpi0: bus 17 (COMP)
> acpicpu0 at acpi0: C3
> acpicpu1 at acpi0: C3
> acpicpu2 at acpi0: C3
> acpicpu3 at acpi0: C3acpicpu4 at acpi0: C3
> acpicpu5 at acpi0: C3
> acpicpu6 at acpi0: C3
> acpicpu7 at acpi0: C3
> bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00
> 0xcc000/0x5e00 0xec000/0x4000!
> ipmi at mainbus0 not configured
> cpu0: Enhanced SpeedStep disabled by BIOS
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
> pci1 at ppb0 bus 4
> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci2 at ppb1 bus 5
> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci3 at ppb2 bus 6
> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci4 at ppb3 bus 7
> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16
> (irq 5)
> ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: apic 8 int 16
> (irq 0)
> pci5 at ppb4 bus 8
> ppb5 at pci5 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci6 at ppb5 bus 9
> ppb6 at pci6 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci7 at ppb6 bus 10
> "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci7 dev 0 function 0 not
> configured
> "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci7 dev 0 function 1 not
> configured
> ppb7 at pci6 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci8 at ppb7 bus 11
> "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci8 dev 0 function 0 not
> configured
> "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci8 dev 0 function 1 not
> configured
> ppb8 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> pci9 at ppb8 bus 12
> ppb9 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
> pci10 at ppb9 bus 1
> mfi0 at pci10 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 8 int
> 16 (irq 5), Dell PERC 6/i integrated
> mfi0: logical drives 1, version 6.0.3-0002, 256MB RAM
> scsibus0 at mfi0: 1 targets, initiator 64
> sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.11> SCSI3 0/direct fixed
> sd0: 285568MB, 512 bytes/sec, 584843264 sec total
> ppb10 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8 int 16
> (irq 0)
> pci11 at ppb10 bus 13
> ppb11 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
> pci12 at ppb11 bus 14
> ppb12 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8 int 16
> (irq 0)
> pci13 at ppb12 bus 15
> ppb13 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
> pci14 at ppb13 bus 16
> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
> ppb14 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
> pci15 at ppb14 bus 2
> ppb15 at pci15 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci16 at ppb15 bus 3
> bnx1 at pci16 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16
> (irq 5)
> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
> (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 20
> (irq 10)
> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
> (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8 int 20
> (irq 10)
> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
> (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb16 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
> pci17 at ppb16 bus 17
> vga1 at pci17 dev 13 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: ATI ES1000 RN50(0), 1.29.0 20080613
> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus1 targ 0 lun 0: <TEAC, DVD-ROM DV28EV, D.AE> ATAPI 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
> uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell DRAC5" rev
> 1.10/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub5 port 1 configuration 1 interface 1 "Dell DRAC5" rev
> 1.10/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1
> ums0: X report 0x0002 not supported
> uhub6 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 4
> uhidev2 at uhub2 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard"
> rev 1.10/3.01 addr 2
> uhidev2: iclass 3/1
> ukbd1 at uhidev2: 8 modifier keys, 6 key codes
> wskbd2 at ukbd1 mux 1
> wskbd2: connecting to wsdisplay0
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> bnx1: address 00:22:19:0b:a9:ee
> brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> bnx0: address 00:22:19:0b:a9:f0
> brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> wskbd2: disconnecting from wsdisplay0
> wskbd2 detached
> ukbd1 detached
> uhidev2 detached
>
>
--
GDB has a 'break' feature; why doesn't it have 'fix' too?
