Fyi --

Similar issues with a new T400. The dmesg is below (I had a better/cleaner
dmesg with an i386/4.4 install (09/10/2008)).

OpenBSD 4.4-current (RAMDISK_CD) #882: Wed Sep 10 12:33:01 MDT 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem  = 2071982080 (1975MB)
avail mem = 1996824576 (1904MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/19/08, BIOS32 rev. 0 @ 0xfdc80,
SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
bios0: vendor LENOVO version "7UET43WW (1.13 )" date 08/19/2008
bios0: LENOVO 7417CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
SSDT SSDT SSDT
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000
0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2a40 rev
0x07
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x2a42 rev
0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
vendor "Intel", unknown product 0x2a43 (class display subclass
miscellaneous, rev 0x07) at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x2a44 (class communications subclass
miscellaneous, rev 0x07) at pci0 dev 3 function 0 not configured
"Intel ICH9 IGP M AMT" rev 0x03 at pci0 dev 25 function 0 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 11
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 11
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 3
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 11
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:22:69:86:96:77
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: irq 11
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 11
pci4 at ppb3 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 11
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 11
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 11
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: irq 11
"Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2917 rev
0x03
ahci0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x2929 rev
0x03: irq 11, AHCI 1.2
scsibus0 at ahci0: 32 targets, initiator 32
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS72201, DCDZ> SCSI3 0/direct
fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, RW/DVD MU10N, 1.05> ATAPI 5/cdrom
removable
"Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
ath0: unable to reset hardware; hal status 1
ath0: unable to reset hardware; hal status 3737542104
ath0: unable to reset hardware; hal status 3650556072
ath0: unable to reset hardware; hal status 3737542104
ath0: unable to reset hardware; hal status 3650556324
syncing disks... done

The operating system has halted.
Please press any key to reboot.

rebooting...
OpenBSD 4.4-current (GENERIC) #1050: Wed Sep 10 12:18:05 MDT 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem  = 2071982080 (1975MB)
avail mem = 1994948608 (1902MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/19/08, BIOS32 rev. 0 @ 0xfdc80,
SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
bios0: vendor LENOVO version "7UET43WW (1.13 )" date 08/19/2008
bios0: LENOVO 7417CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4)
EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T5225" serial  3388 type LION oem
"Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000
0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092106000921
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 900 MHz (1228 mV): speeds: 900, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2a40 rev
0x07
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x2a42 rev
0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Intel", unknown product 0x2a43 (class display subclass
miscellaneous, rev 0x07) at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x2a44 (class communications subclass
miscellaneous, rev 0x07) at pci0 dev 3 function 0 not configured
"Intel ICH9 IGP M AMT" rev 0x03 at pci0 dev 25 function 0 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 11
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 11
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: irq 11
azalia0: codec[s]: Conexant/0x5051
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 3
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 11
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:22:69:86:96:77
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: irq 11
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 11
pci4 at ppb3 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 11
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 11
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 11
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: irq 11
"Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2917 rev
0x03
ahci0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x2929 rev
0x03: irq 11, AHCI 1.2
scsibus0 at ahci0: 32 targets, initiator 32
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS72201, DCDZ> SCSI3 0/direct
fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, RW/DVD MU10N, 1.05> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: irq 11
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edfd netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
umass0 at uhub1 port 1 configuration 1 interface 0 "Memorex TD CLASSIC 003B"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Memorex, TD CLASSIC 003B, PMAP> SCSI0
0/direct removable
sd1: 246MB, 512 bytes/sec, 503808 sec total


On Sun, Sep 21, 2008 at 7:57 PM, Robert <[EMAIL PROTECTED]> wrote:

> Hi all,
>
> got me a Thinkpad X200. Not everything is supported right now.
> Lots of this stuff might apply to any Centrino 2 notebook.
> This mail is more like a headsup for those looking into running OpenBSD
> on the newer Thinkpads.
>
> dmesg (amd64 GENERIC.MP, snapshot 2008-09-10)
> at the bottom of this mail.
>
> Perhaps someone can give me some pointers or advice on following points,
> or might find this info interesting.
>
> 1.) dmesg / memory allocation
> 2.) onboard ethernet
> 3.) wlan
> 4.) speedstep
> 5.) Xorg / intel(4)
> ===
>
> 1.)
> The dmesg is partialy copied by hand.
> That's because I don't have a dockingstation/serial console and:
>
> WARNING: 16384 bytes not available for msgbuf in last cluster (4096
> used)
> [ using 682848 bytes of bsd ELF symbol table ]
>
> My kernel-C-foo doesn't seem to be strong enough to comprehend where to
> go with/from the malloc.c code.
>
> fwiw, the output from DEBUG_MEMLOAD:
> loading 0xcc9000-0x1000000 (0xcc9-0x1000)
> loading 0x1000000-0x7b6a1000 (0x1000-0x7b6a1)
> loading 0x7b6a7000-0x7b7b7000 (0x7b6a7-0x7b7b7)
> loading 0x7b80f000-0x7b8c7000 (0x7b80f-0x7b8c7)
> loading 0x7bbff000-0x7bc00000 (0x7bbff-0x7bc00)
> avail_start = 0x6000
> avail_end = 0x7bc00000
> first_avail = 0xcc9000
>
> Having to reboot so the dmesg is in the scrollback buffer, when i want
> to look at it, isn't so elegant.
> This one i realy would like to get fixed somehow. Anyone?
> ===
>
> 2.)
> The onboard em(4) is not picked up.
> ICH9_IGP_M_AMT seems to be an 82567LM.
> Intel added support for those chips just "recently" to to their driver,
> not in OpenBSD yet.
>
> Not having anything to bribe Brad with right now, I'll try to
> get my head around that freebsd codebase and see if I can find the
> necessary quirks to add.
> ===
>
> 3.)
> Fyi, the SKU I got has an Intel 5100 Mini-PCI.
> No driver support for those.
> I don't complain about that. If I wanted to use wlan I'd just switch it
> out for something working.
> ===
>
> 4.)
> The P8600 Core2Duo is not regognized by the speedstep code.
>
> Adding the model 0x7 to est.c results in:
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617091f06000091f
> cpu0: using only highest and lowest powerstates
> cpu0: Enhanced SpeedStep 2400 MHz (1196mV): speeds: 2400, 2600 MHz
>
> Now i just have to find out how to populate fqlist with the right data.
>
> (I tried amd64/est.c v1.6 with coresponding acpicpu.c but that gave me
> no hw.setperf either.)
> ===
>
> 5.)
> The X200 uses the GM45 chipset. Graphics controller is the GMA 4500MHD,
> which isn't supported by intel(4)/version 2.4.2(stable) which is in
> xenocara right now.
> With 2.4.2 X complains about the controller and produces small
> artefacts near the mouse cursor-
> Support is in Intels "unstable" tree. Estemating when they will release
> their next stable, I might even get around to try get the code
> compiling on my system myself.
>
> On a sidenote, the X200 seems to drive only the internal _or_
> external display. Depending on if a screen is connectect to the VGA
> port at boot or not. (The BIOS is set to use the internal screen,
> but still uses the VGA port if a screen is connected.)
> ===
>
>
> So far I'm very happy with the X200. Small, silent and fast.
> It's not build like a tank as the older Thinkpads are.
> The lid has some flex to it and if you look for it you kind find it on
> the sides of the keyboard too.
> Otherwise the Lenovo engs learned their lesson from IBMs bluesheets.
>
>
> Except for the points mentioned above OpenBSD runs flawlessly.
> With an Express Card msk(4) i can work around any of those.
> Even without speedstep the 4-cell battery delivers over 2 hours of
> power.
>
>
> Cheers
>
> - Robert
>
>
> [1] dmesg
> [2] hw.sensors
> ===
>
> [1]
> OpenBSD 4.4-current (GENERIC.MP) #1839: Wed Sep 10 12:29:50 MDT 2008
>    [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2059067392 (1963MB)
> avail mem = 1999065088 (1906MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (62 entries)
> bios0: vendor LENOVO version "6DET28WW (1.05 )" date 07/30/2008
> bios0: LENOVO 74542GU
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
> EXP3(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) EHC0(S3)
> EHC1(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.29 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: apic clock running at 266MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu1: 3MB 64b/line 8-way L2 cache
> ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2
> acpicpu1 at acpi0: C3, C2
> acpitz0 at acpi0: critical temperature 127 degC
> acpitz1 at acpi0: critical temperature 104 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T4534" serial   116 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock at acpi0 not configured
> acpivideo at acpi0 not configured
> acpivideo at acpi0 not configured
> cpu0: unknown i686 model 7, can't get bus clockcpu0: EST: unknown system
> bus clock
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2a40 rev
> 0x07
> vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x2a42 rev
> 0x07
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> vendor "Intel", unknown product 0x2a43 (class display subclass
> miscellaneous, rev 0x07) at pci0 dev 2 function 1 not configured
> vendor "Intel", unknown product 0x2a44 (class communications subclass
> miscellaneous, rev 0x07) at pci0 dev 3 function 0 not configured
> "Intel ICH9 IGP M AMT" rev 0x03 at pci0 dev 25 function 0 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> (irq 11)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> (irq 11)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1
> int 17 (irq 11)
> azalia0: codec[s]: Conexant/0x5051
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> (irq 11)
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
> (irq 11)
> pci2 at ppb1 bus 3
> "Intel WiFi Link 5100AGN" rev 0x00 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
> (irq 11)
> pci3 at ppb2 bus 5
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> (irq 11)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> (irq 11)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> (irq 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/100 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci4 at ppb3 bus 13
> pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2917 rev
> 0x03
> ahci0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x2929 rev
> 0x03: apic 1 int 16 (irq 11), AHCI 1.2
> scsibus0 at ahci0: 32 targets, initiator 32
> sd0 at scsibus0 targ 0 lun 0: <ATA FUJITSU MHZ2160B, 0084> SCSI3 0/direct
> fixed
> sd0: 152627MB, 512 bytes/sec, 312581808 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int
> 23 (irq 11)
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> ugen1 at uhub3 port 2 "Lenovo Computer Corp Thinkpad Bluetooth with
> Enhanced Data Rate II" rev 2.00/3.52 addr 3
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
> ===
>
> [2]
> hw.sensors.cpu0.temp0=24.00 degC
> hw.sensors.cpu1.temp0=24.00 degC
> hw.sensors.acpitz0.temp0=38.05 degC (zone temperature)
> hw.sensors.acpitz1.temp0=29.05 degC (zone temperature)
> hw.sensors.acpibat0.volt0=14.40 VDC (voltage)
> hw.sensors.acpibat0.volt1=16.61 VDC (current voltage)
> hw.sensors.acpibat0.watthour0=29.91 Wh (last full capacity)
> hw.sensors.acpibat0.watthour1=1.50 Wh (warning capacity)
> hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity)
> hw.sensors.acpibat0.watthour3=29.91 Wh (remaining capacity), OK
> hw.sensors.acpibat0.raw0=0 (battery full), OK
> hw.sensors.acpibat0.raw1=0 (rate)
> hw.sensors.acpiac0.indicator0=On (power supply)
> hw.sensors.aps0.temp0=40.00 degC
> hw.sensors.aps0.temp1=40.00 degC
> hw.sensors.aps0.indicator0=Off (Keyboard Active)
> hw.sensors.aps0.indicator1=Off (Mouse Active)
> hw.sensors.aps0.indicator2=On (Lid Open)
> hw.sensors.aps0.raw0=495 (X_ACCEL)
> hw.sensors.aps0.raw1=482 (Y_ACCEL)
> hw.sensors.aps0.raw2=495 (X_VAR)
> hw.sensors.aps0.raw3=482 (Y_VAR)
>
>


-- 
www.nealhogan.net

Reply via email to