Christian Weisgerber wrote:
Could people with a non-laptop Pentium III machine please send me
the results of
$ md5 -ttt
(on an idle machine) and their dmesg?
These are dual proc, but I'd guess md5 is single-thread.
P3-933 Compaq DL380:
MD5 time trial. Processing 1000000 10000-byte blocks...
Digest = f0843f04c524250749d014a8152920ec
Time = 92.476850 seconds
Speed = 108135171.126612 bytes/second
OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804859904 (767MB)
avail mem = 770043904 (734MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xf206c (25 entries)
bios0: vendor Compaq version "P17" date 12/18/2002
bios0: Compaq ProLiant DL380
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xe8000/0x6000
0xee000/0x2000!
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
ciss0 at pci1 dev 4 function 0 "Compaq Smart Array 5300 rev.2" rev 0x02:
apic 8 int 11 (irq 11)
ciss0: 1 LD, HW rev 0, FW 3.54/3.54
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 3.54> SCSI0
0/direct fixed
sd0: 69455MB, 8854 cyl, 255 head, 63 sec, 512 bytes/sec, 142245120 sec total
fxp0 at pci1 dev 5 function 0 "Intel 8255x" rev 0x0d, i82550: apic 8 int
15 (irq 15), address 00:02:b3:8f:14:2c
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
siop0 at pci0 dev 1 function 0 "Symbios Logic 53c1510D" rev 0x02: apic 8
int 5 (irq 5), using 4K of on-board RAM
scsibus1 at siop0: 16 targets
siop1 at pci0 dev 1 function 1 "Symbios Logic 53c1510D" rev 0x02: apic 8
int 11 (irq 11), using 4K of on-board RAM
scsibus2 at siop1: 16 targets
st0 at scsibus2 targ 6 lun 0: <COMPAQ, SDT-10000, 1.12> SCSI2
1/sequential removable
fxp1 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: apic 8 int
10 (irq 10), address 00:02:a5:28:55:62
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
"ATI Mach64 GV" rev 0x7a at pci0 dev 3 function 0 not configured
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 5 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb0 bus 1
vga1 at pci2 dev 0 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci2 dev 1 function 0 not configured
vendor "Compaq", unknown product 0x005a (class memory subclass
miscellaneous, rev 0x00) at pci2 dev 2 function 0 not configured
vendor "Compaq", unknown product 0x00b1 (class memory subclass
miscellaneous, rev 0x01) at pci2 dev 4 function 0 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4f: SMBus
disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: no compatibility interrupt for use by channel 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
Dual P3-800 Intel board:
MD5 time trial. Processing 1000000 10000-byte blocks...
Digest = f0843f04c524250749d014a8152920ec
Time = 108.083520 seconds
Speed = 92521042.986017 bytes/second
OpenBSD 4.3-stable (GENERIC.MP) #0: Fri Aug 22 00:08:13 EDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 796 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 2138599424 (2039MB)
avail mem = 2059829248 (1964MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/26/01, BIOS32 rev. 0 @ 0xfd7e3,
SMBIOS rev. 2.1 @ 0xef840 (46 entries)
bios0: vendor Intel Corporation version
"L440GX0.86B.0133.P14.0103261759" date 03/26/01
bios0: Intel L440GX+
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices PCI0(S4) COMB(S4) USBC(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 796 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82440BX AGP" rev 0x00
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82440BX AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 15 function 0 "DEC 21150-BC PCI-PCI" rev 0x06
pci2 at ppb1 bus 2
em0 at pci2 dev 4 function 0 "Intel PRO/1000 (82542)" rev 0x03: apic 2
int 20 (irq 11), address 00:08:c7:86:39:f5
ral0 at pci0 dev 9 function 0 "Ralink RT2560" rev 0x01: apic 2 int 19
(irq 11), address 00:09:f3:70:13:52
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
wi0 at pci0 dev 11 function 0 "Intersil PRISM2.5" rev 0x01: apic 2 int
18 (irq 11)
wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.1.1 (primary),
1.8.0 (station), address 00:09:5b:11:cf:b6
ahc0 at pci0 dev 12 function 0 "Adaptec AIC-7896/7 U2" rev 0x00: apic 2
int 19 (irq 11)
scsibus0 at ahc0: 16 targets
ahc1 at pci0 dev 12 function 1 "Adaptec AIC-7896/7 U2" rev 0x00: apic 2
int 19 (irq 11)
scsibus1 at ahc1: 16 targets
fxp0 at pci0 dev 13 function 0 "Intel 8255x" rev 0x0d, i82550: apic 2
int 17 (irq 5), address 00:02:b3:8f:1a:3f
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 14 function 0 "Intel 8255x" rev 0x08, i82559: apic 2
int 21 (irq 10), address 00:d0:b7:89:03:69
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
fxp2 at pci0 dev 16 function 0 "Intel 8255x" rev 0x05, i82558: apic 2
int 16 (irq 11), address 00:90:27:34:c7:da
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 0
piixpcib0 at pci0 dev 18 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 18 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <, ATAPI CDROM., 10AH> SCSI0 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 18 function 2 "Intel 82371AB USB" rev 0x01: apic 2 int
21 (irq 10)
piixpm0 at pci0 dev 18 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB SDRAM registered ECC PC100CL2
spdmem1 at iic0 addr 0x51: 512MB SDRAM registered ECC PC100CL2
spdmem2 at iic0 addr 0x52: 512MB SDRAM registered ECC PC100CL3
spdmem3 at iic0 addr 0x53: 512MB SDRAM registered ECC PC100CL3
vga1 at pci0 dev 20 function 0 "Cirrus Logic CL-GD5480" rev 0x23
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
