Hi Martin, ral0 works out of the box and without any problems. Currently I've got the wireless lan with WPA2 working with following hostname.ral0
dhcp NONE NONE NONE nwid %my_ssid% wpa wpapsk\ %my_wpa_key_generated_with_'wpa-psk'% Best regards, Sven Martin Toft wrote: > On Mon, Sep 15, 2008 at 10:26:26PM +0200, Sven Wolf wrote: >> Hi, >> >> I've successfully installed -current on a ASUS EEEPC 1000H (via an usb >> stick). >> At the moment lii doesn't detect the wired lan adapter: "Attansic >> Technology L1E" rev 0xb0 but maybe there will be a patch in the future... >> For the LAN connection I've used an USB adapter: axe0 at uhub0 port 2 >> configuration 1 interface 0 "Cisco-Linksys USB200M v2" >> >> If you have any question just contact me. I've tried to install some >> packages but it seems that libiconv-1.12 is broken in the current snaphot :( >> >> >> Best regards, >> Sven > > Hi Sven > > I've done almost the same thing with my Eee PC1000H :-D > > Only almost, though, as I'm tracking -current instead of running a > snapshot. I installed a snapshot using an USB cdrom drive, checked out > the -current source and built it. I know snapshots are the the best way > to test things, but I did it this way to be able to hack around with the > source and test patches (as much as time and competence allow me to). > > I'm writing this mail on the Eee laptop, connected to the world through > a Linksys USB200M v2 USB Ethernet adaptor :-) > > Don't you experience problems with the wireless Ralink RT2790 network > device? I've had it working in 2-3 boots right after I got the laptop > and never since. From dmesg: > > ral0 at pci3 dev 0 function 0 "Ralink RT2790" rev 0x00: irq 11ral0: timeout > waiting for NIC to initialize > > If you wonder how to unmute the sound card, try this: > > mixerctl outputs.speaker2.eapd=on > > (see also mixerctl.conf(5)) > > I have attached the mail that I sent to [EMAIL PROTECTED] a while ago. > > Martin > > > ----- Forwarded message from Martin Toft <[EMAIL PROTECTED]> ----- > > Date: Thu, 4 Sep 2008 21:21:45 +0200 > From: Martin Toft <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: Asus Eee PC 1000H laptop > > Notable things that work: > - Boots without problems every time. > - Sound. > - USB. > - X (it detects everything automatically and Just Works(tm)). > - Touchpad. > > Things that doesn't work or only work partially: > - APM. AC is detected, but battery charge is unknown. > - LAN (Attansic Technology L1E rev 0xb0). I have tried forcing it to use > lii(4) but it fails init with "can't get MAC address"-ish. > - WLAN (Ralink RT2790). I have had it working in about two boots out of > approx 30. I haven't found a pattern. I'm multibooting with the > preinstalled Windows at the moment, and maybe it has something to do > with the way Windows handles the card. > > I have included dmesg and "pcidump -v". Thanks for everyting! > > You're welcome to contact me if you need me to test something or want > more info. > > If you want an entry for the i386-laptop page, I'm eager to write one > and make my dmesg available somewhere. > > > dmesg > ===== > > OpenBSD 4.4-current (GENERIC) #2: Thu Sep 4 01:33:19 CEST 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR > real mem = 1064529920 (1015MB) > avail mem = 1020891136 (973MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 07/11/08, BIOS32 rev. 0 @ 0xf0010, > SMBIOS rev. 2.5 @ 0xf0700 (30 entries) > bios0: vendor American Megatrends Inc. version "0901" date 07/11/2008 > bios0: ASUSTeK Computer INC. 1000H > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8770/176 (9 entries) > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GBM LPC" rev 0x00) > pcibios0: PCI bus #5 is the last bus > bios0: ROM list: 0xc0000/0xec00! > cpu0 at mainbus0 > cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2406000c24 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 1600 MHz (1276 mV): speeds: 1600, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > agp0 at vga1: aperture at 0xd0000000, size 0x10000000 > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 5 > azalia0: codec[s]: Realtek/0x0269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 5 > pci1 at ppb0 bus 4 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: irq 10 > pci2 at ppb1 bus 3 > "Attansic Technology L1E" rev 0xb0 at pci2 dev 0 function 0 not configured > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: irq 11 > pci3 at ppb2 bus 1 > ral0 at pci3 dev 0 function 0 "Ralink RT2790" rev 0x00: irq 11ral0: timeout > waiting for NIC to initialize > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 3 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 7 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 5 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 3 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci4 at ppb3 bus 5 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <ST980811AS> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > biomask ebfd netmask ebfd ttymask ffff > mtrr: Pentium Pro MTRR support > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > > > pcidump -v > ========== > > 0:0:0: Intel 82945GME Host > 0x0000: Vendor ID: 8086 Product ID: 27ac > 0x0004: Command: 0006 Status ID: 2090 > 0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 03 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 8340 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x00e0: Capability 0x09: Vendor Specific > 0:2:0: Intel 82945GME Video > 0x0000: Vendor ID: 8086 Product ID: 27ae > 0x0004: Command: 0007 Status ID: 0090 > 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 03 > 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0xf7f00000 > 0x0014: BAR io addr: 0x0000dc00 > 0x0018: BAR mem prefetchable 32bit addr: 0xd0000000 > 0x001c: BAR mem 32bit addr: 0xf7ec0000 > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 8340 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 > 0x0090: Capability 0x05: Message Signaled Interrupts (MSI) > 0x00d0: Capability 0x01: Power Management > 0:2:1: Intel 82945GM Video > 0x0000: Vendor ID: 8086 Product ID: 27a6 > 0x0004: Command: 0007 Status ID: 0090 > 0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 03 > 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0xf7f80000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 8340 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x00d0: Capability 0x01: Power Management > 0:27:0: Intel 82801GB HD Audio > 0x0000: Vendor ID: 8086 Product ID: 27d8 > 0x0004: Command: 0006 Status ID: 0010 > 0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08 > 0x0010: BAR mem 64bit addr: 0x00000000f7eb8000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 831a > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > 0x0060: Capability 0x05: Message Signaled Interrupts (MSI) > 0x0070: Capability 0x10: PCI Express > 0:28:0: Intel 82801GB PCIE > 0x0000: Vendor ID: 8086 Product ID: 27d0 > 0x0004: Command: 0104 Status ID: 0010 > 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 08 > 0x0010: 00000000 > 0x0014: 00000000 > 0x0018: Primary Bus: 0 Secondary Bus: 4 Subordinate Bus: 4 > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000 > 0x0020: Memory Base: fff0 Memory Limit: 0000 > 0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 01 Line: 05 Bridge Control: 0002 > 0x0040: Capability 0x10: PCI Express > 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > 0:28:1: Intel 82801GB PCIE > 0x0000: Vendor ID: 8086 Product ID: 27d2 > 0x0004: Command: 0107 Status ID: 0010 > 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 08 > 0x0010: 00000000 > 0x0014: 00000000 > 0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3 > Secondary Latency Timer: 00 > 0x001c: I/O Base: e0 I/O Limit: e0 Secondary Status: 2000 > 0x0020: Memory Base: fbf0 Memory Limit: fbf0 > 0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 02 Line: 0a Bridge Control: 0002 > 0x0040: Capability 0x10: PCI Express > 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > 0:28:3: Intel 82801GB PCIE > 0x0000: Vendor ID: 8086 Product ID: 27d6 > 0x0004: Command: 0106 Status ID: 0010 > 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 08 > 0x0010: 00000000 > 0x0014: 00000000 > 0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 2 > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000 > 0x0020: Memory Base: f800 Memory Limit: fbe0 > 0x0024: Prefetch Memory Base: f001 Prefetch Memory Limit: f6f1 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 04 Line: 0b Bridge Control: 0002 > 0x0040: Capability 0x10: PCI Express > 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > 0:29:0: Intel 82801GB USB > 0x0000: Vendor ID: 8086 Product ID: 27c8 > 0x0004: Command: 0005 Status ID: 0280 > 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR io addr: 0x0000d400 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 03 Min Gnt: 00 Max Lat: 00 > 0:29:1: Intel 82801GB USB > 0x0000: Vendor ID: 8086 Product ID: 27c9 > 0x0004: Command: 0005 Status ID: 0280 > 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR io addr: 0x0000d480 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00 > 0:29:2: Intel 82801GB USB > 0x0000: Vendor ID: 8086 Product ID: 27ca > 0x0004: Command: 0005 Status ID: 0280 > 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR io addr: 0x0000d800 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 03 Line: 07 Min Gnt: 00 Max Lat: 00 > 0:29:3: Intel 82801GB USB > 0x0000: Vendor ID: 8086 Product ID: 27cb > 0x0004: Command: 0005 Status ID: 0280 > 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR io addr: 0x0000d880 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 04 Line: 05 Min Gnt: 00 Max Lat: 00 > 0:29:7: Intel 82801GB USB > 0x0000: Vendor ID: 8086 Product ID: 27cc > 0x0004: Command: 0106 Status ID: 0290 > 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0xf7eb7c00 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 03 Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > 0x0058: Capability 0x0a: Debug Port > 0:30:0: Intel 82801BAM Hub-to-PCI > 0x0000: Vendor ID: 8086 Product ID: 2448 > 0x0004: Command: 0104 Status ID: 0010 > 0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: e2 > 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00 > 0x0010: 00000000 > 0x0014: 00000000 > 0x0018: Primary Bus: 0 Secondary Bus: 5 Subordinate Bus: 5 > Secondary Latency Timer: 20 > 0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2280 > 0x0020: Memory Base: fff0 Memory Limit: 0000 > 0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 0002 > 0x0050: Capability 0x0d: PCI-PCI > 0:31:0: Intel 82801GBM LPC > 0x0000: Vendor ID: 8086 Product ID: 27b9 > 0x0004: Command: 0007 Status ID: 0210 > 0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 02 > 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x00e0: Capability 0x09: Vendor Specific > 0:31:2: Intel 82801GBM SATA > 0x0000: Vendor ID: 8086 Product ID: 27c4 > 0x0004: Command: 0005 Status ID: 02b8 > 0x0008: Class: 01 Subclass: 01 Interface: 80 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR io addr: 0x00005800 > 0x0014: BAR io addr: 0x00005808 > 0x0018: BAR io addr: 0x00005810 > 0x001c: BAR io addr: 0x0000580c > 0x0020: BAR io addr: 0x0000ffa0 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 830f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x0070: Capability 0x01: Power Management > 1:0:0: Ralink RT2790 > 0x0000: Vendor ID: 1814 Product ID: 0781 > 0x0004: Command: 0006 Status ID: 0010 > 0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 00 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0x3f800000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1814 Product ID: 2790 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > 0x0050: Capability 0x05: Message Signaled Interrupts (MSI) > 0x0070: Capability 0x10: PCI Express > 3:0:0: Attansic Technology L1E > 0x0000: Vendor ID: 1969 Product ID: 1026 > 0x0004: Command: 0007 Status ID: 0010 > 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: b0 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08 > 0x0010: BAR mem 64bit addr: 0x00000000fbfc0000 > 0x0018: BAR io addr: 0x0000ec00 > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1043 Product ID: 8324 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > 0x0048: Capability 0x05: Message Signaled Interrupts (MSI) > 0x0058: Capability 0x10: PCI Express > 0x006c: Capability 0x03: Vital Product Data (VPD) > > ----- End forwarded message -----