Miod@ had a diff for that and i tried it, it fixes the warnings and heat control completely. now i hear fan changing rotation speed according to system load and temperature values in the different TZ seem to be held within appropriate range.
As far as i can tell, Miod already submitted the diff to the -current. Check out, rebuild the kernel and try it :-) 2008/9/12 Rafal Brodewicz <[EMAIL PROTECTED]>: > On Fri, Sep 12, 2008 at 11:51:40AM +0300, Denis Doroshenko wrote: >> in a hope this diff would fix overheating under ACPI on my compaq >> nc6000, built the kernel and found out that this diff changed acpitz >> warnings from: >> >> acpitz0: _AL1[0] not a object ref >> acpitz0: _AL2[0] not a object ref >> acpitz0: _AL3[0] not a object ref >> >> to >> >> acpitz0: _AL1[0.0] _PRO not a package >> acpitz0: _AL2[0.0] _PRO not a package >> acpitz0: _AL3[0.0] _PRO not a package > > Same effect here. > > OpenBSD 4.4-current (GENERIC.MP) #29: Fri Sep 12 13:31:52 CEST 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 1051783168 (1003MB) > avail mem = 1020948480 (973MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a9f (25 entries) > bios0: vendor Hewlett-Packard version "68DDU Ver. F.12" date 05/22/2008 > bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD) > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) > C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S0) C137(S0) C134(S5) C2A2(S5) > C23D(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.84 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > cpu0: 2MB 64b/line 8-way L2 cache > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.50 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > cpu1: 2MB 64b/line 8-way L2 cache > ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 1 > acpiprt0 at acpi0: bus 2 (C0B0) > acpiprt1 at acpi0: bus 8 (C11D) > acpiprt2 at acpi0: bus 16 (C131) > acpiprt3 at acpi0: bus 24 (C132) > acpiprt4 at acpi0: bus 40 (C134) > acpiprt5 at acpi0: bus 0 (C003) > acpiec0 at acpi0 > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpitz0 at acpi0: critical temperature 105 degC > acpitz1 at acpi0: critical temperature 108 degC > acpitz2 at acpi0: critical temperature 110 degC > acpitz3 at acpi0: critical temperature 256 degC > acpitz4 at acpi0: critical temperature 108 degC > acpibat0 at acpi0: C23B model "Primary" serial 43469 2007/04/27 type LIon oem > "Hewlett-Packard" > acpibat1 at acpi0: C23A not present > acpiac0 at acpi0: AC unit online > acpibtn0 at acpi0: C2BF > acpibtn1 at acpi0: C153 > acpivideo at acpi0 not configured > cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092506000925 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 1800 MHz (1292 mV): speeds: 1800, 1200 MHz > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > agp0 at vga1: aperture at 0xd0000000, size 0x10000000 > "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 > (irq 10) > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 > (irq 10) > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 18 > (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 > int 16 (irq 10) > azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x1040, using Analog > Devices/0x1981 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03 > pci1 at ppb0 bus 8 > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 17 > (irq 10) > pci2 at ppb1 bus 16 > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 > int 17 (irq 10), MoW2, address 00:1b:77:16:56:9a > ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 18 > (irq 11) > pci3 at ppb2 bus 24 > bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2 > (0xb002): apic 1 int 18 (irq 11), address 00:17:a4:e8:2a:06 > brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 > ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 16 > (irq 10) > pci4 at ppb3 bus 40 > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 > (irq 10) > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 > (irq 10) > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 > (irq 11) > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 20 > (irq 10) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > pci5 at ppb4 bus 2 > cbb0 at pci5 dev 4 function 0 "Ricoh 5C476 CardBus" rev 0xb6: apic 1 int 16 > (irq 5) > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PC05> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > pciide0: channel 1 ignored (disabled) > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 17 > (irq 10), AHCI 1.1 > scsibus1 at ahci0: 32 targets, initiator 32 > sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct > fixed > sd0: 114473MB, 512 bytes/sec, 234441648 sec total > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > wpi0: radio is disabled by hardware switch > wpi0: fatal firmware error > wpi0: radio is disabled by hardware switch > wpi0: fatal firmware error > acpitz3: _AL4[0.0] _PRO not a package > acpitz3: _AL4[0.0] _PRO not a package > acpitz3: _AL4[0.0] _PRO not a package > acpitz3: _AL4[0.0] _PRO not a package > acpitz3: _AL4[0.0] _PRO not a package > acpitz3: _AL4[0.0] _PRO not a package > acpitz3: _AL4[0.0] _PRO not a package
