On Mon, Sep 08, 2008 at 04:50:37PM -0700, Bryan Vyhmeister wrote: > I am trying to get a SparkLAN WCFM-100 Compact Flash wireless card > working with wpa on a system running -current that is about equivalent > to 4.4. I tried it on both an i386 laptop and on a zaurus system and I > get the same error on both when I try to enable wpa. The line from my > dmesg is as follows: > > malo0 at pcmcia1 function 0 "Marvell, 802.11 CF, ID: 04" port 0xa000/128 > malo0: address 00:XX:XX:XX:XX:XX > > When I try to enable wpa, I get the message: > > ifconfig: SIOCS80211WPAPARMS: Operation not supported by device > > From the current malo(4) man page and the commit logs, wpa should be > supported on malo(4) cards and I confirmed that it works fine with a > Netgear WG511v2 along with wpa. Is there anything I can do to fix this? > Thank you.
pcmcia malo or cmalo as the driver calls itself internally, is quite different to pci/cardbus based malo. Currently cmalo is setup for hardware based WEP, it will need to be changed a bit to support WPA.
