Hi all
I have been susccess full install openbsd 4.3 at mac mini ( intel
base), but i have problem when halt -p , the mac mini don't halt and
power off only restart bellow dmesg from mac mini :
# dmesg
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1040564224 (992MB)
avail mem = 998068224 (951MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @
0xe0000 (38 entries)
bios0: vendor Apple Inc. version "MM21.88Z.009A.B00.0706281359" date 06/28/07
bios0: Apple Inc. Macmini2,1
acpi0 at bios0: rev 0
acpi0: tables DSDT HPET APIC MCFG ASF! SBST ECDT SSDT SSDT FACP SSDT
acpi0: wakeup devices PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) USB7(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe600!
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: aperture at 0x40000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and
Frequency, rev 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 10
azalia0: codec[s]: Sigmatel STAC9221
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 11
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22,
Yukon-2 EC rev. A3 (0x2): irq 11
msk0 at mskc0 port A: address 00:16:cb:b0:e9:d7
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: irq 11
pci2 at ppb1 bus 2
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 11
ath0: AR5424 10.3 phy 6.1 rf 10.2, WORAW, address 00:1f:f3:d9:b5:bb
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
"AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACK> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <Hitachi HTS542580K9SA00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f9ff netmask f9ff ttymask fbff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Apple Computer
ADB device" rev 2.00/19.65 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Apple Computer
ADB device" rev 2.00/19.65 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
uhidev2 at uhub3 port 1 configuration 1 interface 0 "KYE Optical
Mouse" rev 1.10/2.00 addr 2
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons and Z dir.
wsmouse1 at ums1 mux 0
uhidev3 at uhub4 port 2 configuration 1 interface 0 "Apple Computer,
Inc. IR Receiver" rev 2.00/1.10 addr 3
uhidev3: iclass 3/0, 38 report ids
uhid0 at uhidev3 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev3 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev3 reportid 38: input=4, output=0, feature=0
uhidev4 at uhub3 port 2 configuration 1 interface 0 "LITEON Technology
USB Keyboard" rev 1.10/1.09 addr 3
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 modifier keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub3 port 2 configuration 1 interface 1 "LITEON Technology
USB Keyboard" rev 1.10/1.09 addr 3
uhidev5: iclass 3/0, 2 report ids
uhid3 at uhidev5 reportid 1: input=1, output=0, feature=0
uhid4 at uhidev5 reportid 2: input=3, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
#
Best regards
sonjaya
http://idsale.blogspot.com
http://www.pojokdomain.com(sell & buy domain with free )
