Hi guys, i have added one Matrox G450 in OpenBSD,
and have enabled mgadrm in the GENERIC file, i build
and install, and, when try to launch X, get the next
error:
xauth: creating new authority file /root/.serverauth.27834
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.4 amd64
Current Operating System: OpenBSD rasputin.debugg.org 4.4 GENERIC#0 amd64
Build Date: 02 September 2008 03:39:02PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 5 09:59:25 2008
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(II) Module "ramdac" already built-in
(EE) MGA(0): failed to create server context
(EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) AIGLX error: drmOpenOnce failed (Operation not permitted)
(EE) AIGLX: reverting to software rendering
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Fatal server error:
Caught signal 11. Server aborting
X connection to :0.0 broken (explicit kill or server shutdown).
anyone have idea about why i'm getting this errors?
the matrox, works fine without mgadrm, but, i need
3D for development and, for not install linux...
Thanks to all.
Next my dmesg:
OpenBSD 4.4-current (GENERIC) #0: Fri Sep 5 09:48:47 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2134134784 (2035MB)
avail mem = 2072264704 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (37 entries)
bios0: vendor Award Software International, Inc. version "F8" date 08/03/2004
bios0: Gigabyte Technology Co., Ltd. K8T800-8237
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB6(S3) USB7(S3) USB8(S3)
USB9(S3) UAR1(S5) LPT1(S5) ECP1(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2412.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required
cpu0: Cool'n'Quiet K8 2412 MHz: speeds: 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x85
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
mgadrm0 at vga1 Matrox G400/G450 (AGP)(0):couldn't find agp
"Creative Labs SoundBlaster Audigy LS" rev 0x00 at pci0 dev 12 function 0 not
configured
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <ST3160021A>
wd0: 16-sector PIO, LBA48, 152626MB, 312579695 sectors
wd1 at pciide1 channel 0 drive 1: <ST3160021A>
wd1: 16-sector PIO, LBA48, 152626MB, 312579695 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-H12N, UL01> ATAPI 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 4
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 5
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 5
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x4e 01=02 02=10 03=72 05=80 06=0f 0a=ff 0e=e0 0f=ff 3e=80 48=80
4a=80 4e=80 fe=80 words 00=00ff 01=02ff 02=10ff 03=72ff 04=00ff 05=80ff 06=0fff
07=00ff
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 11
ac97: codec id 0x414c4780 (Avance Logic ALC658 rev 0)
ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auvia0
rl0 at pci0 dev 19 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:0f:ea:4d:bf:36
rlphy0 at rl0 phy 0: RTL internal PHY
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 0x02, EC port 0x290
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=1042056kB
DDB symbols added: 410424 bytes
wsdisplay0: screen 1 deleted
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 deleted
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 deleted
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 deleted
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)
--
Guillermo Bernaldo de QuirC3s Maraver Pedroche.
