Hi misc@,
this is my first post so please bare with me.
I'm trying to get a wg311v2 to work in a Sun Ultra 60 workstation under
-current (snapshot from aug. 27th). Firmware is installed. Everything seems ok
however although it seems to connect to the AP, dhclient won't get an IP
address from it. If I set the address manually, I can ping myself but noone
else and noone can ping me. The following message is displayed in both cases
and when I issue ifconfig -M acx0 (returns none):
acx0: TX failed -- DMA error
My understanding of the message is that the card is not able to send packets
because it can't access memory, now I don't have the background to understand
why.
Thanks for your help
Huy
Here's my /etc/hostname.acx0:
up chan 11 nwid myap nwkey 0x1deadbeef1 mode 11g
ifconfig acx0
acx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0f:b5:47:ef:e3
groups: wlan
media: IEEE802.11 autoselect (autoselect ibss)
status: active
ieee80211: nwid myap chan 11 bssid 02:0f:b5:47:ef:e3 nwkey 0x1deadbeef1
inet6 fe80::20f:b5ff:fe47:efe3%acx0 prefixlen 64 scopeid 0x3
dmesg
console is /[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],400000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.4-current (GENERIC.MP) #410: Wed Aug 27 16:07:02 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 536870912 (512MB)
avail mem = 507854848 (484MB)
mainbus0 at root: Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 450MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II (rev 1.0) @ 450.025 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64
b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-II (rev 1.0) @ 450.025 MHz
cpu1: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64
b/l)
psycho0 at mainbus0 addr 0xfffb4000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map fe000000-ffffffff, , STC0 enabled
pci0 at psycho0
ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003
"SUNW,pll" at ebus0 addr 504000-504002 not configured
uperf0 at ebus0 addr 500000-500007: model SUNW,sc-qp (0/1) ports 9
sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2
sabtty0 at sab0 port 0: console
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: no keyboard
com0 at ebus0 addr 3062f8-3062ff ivec 0x2a: mouse: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ivec 0x22: polled
"fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ivec 0x27
not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0
audio0 at audioce0
"Sun PCIO EBus2" rev 0x01 at pci0 dev 1 function 0 not configured
hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:8a:9a:61
luphy0 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
siop0 at pci0 dev 3 function 0 "Symbios Logic 53c875" rev 0x14: ivec 0x7e0,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336605LSUN36G, 0638> SCSI3 0/direct
fixed
sd0: 34732MB, 512 bytes/sec, 71132959 sec total
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST336605LSUN36G, 0238> SCSI3 0/direct
fixed
sd1: 34732MB, 512 bytes/sec, 71132959 sec total
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> SCSI2 5/cdrom
removable
siop1 at pci0 dev 3 function 1 "Symbios Logic 53c875" rev 0x14: ivec 0x7e6,
using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
hme1 at pci0 dev 2 function 1 "Sun HME" rev 0x01: ivec 0x7d1, address
00:03:ba:03:56:41
luphy1 at hme1 phy 1: LU6612 10/100 PHY, rev. 1
psycho1 at mainbus0 addr 0xfffc6000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho1: bus range 128-128, PCI bus 128
psycho1: dvma map fe000000-ffffffff, iotdb a0bc8000-a0bd0000, STC0 enabled,
STC1 enabled
pci1 at psycho1
acx0 at pci1 dev 1 function 0 "TI ACX111" rev 0x00: ivec 0x7c0
acx0: ACX111, radio Radia (0x16), EEPROM ver 5, address 00:0f:b5:47:ef:e3
"counter-timer" at mainbus0 addr 0xfff9fc00 not configured
creator0 at mainbus0 addr 0xfeb80000: Creator3D, model SUNW,501-4788, dac 10
wsdisplay0 at creator0
wsdisplay0: screen 0 added (std, sun emulation)
softraid0 at root
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
bootpath: /[EMAIL PROTECTED],4000/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
root on sd0a swap on sd0b dump on sd0b
Thanks for any hint
Huy
