I have a adsl used by windows, it's fine. When I used in OpenBSD: # cat /etc/ppp/ppp.conf default: set log Phase Chat LCP IPCP CCP tun debug command set redial 15+5 0 set reconnect 30 10000
pppoe: set device "!/usr/sbin/pppoe -i bge0" set mtu max 1492 set mru max 1492 set speed sync set dial set login enable dns disable acfcomp protocomp deny acfcomp enable lqr enable mssfixup set authname "[EMAIL PROTECTED]" set authkey yyy # ppp -ddial pppoe # Aug 14 16:44:28 proxy ppp[23798]: Phase: Using interface: tun1 Aug 14 16:44:28 proxy ppp[23798]: Phase: deflink: Created in closed state Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: default: set redial 15+5 0 Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: default: set reconnect 30 10000 Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set device !/usr/sbin/pppoe -i bge0 Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set mtu max 1492 Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set mru max 1492 Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set speed sync Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set dial Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set login Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: enable dns Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: disable acfcomp protocomp Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: deny acfcomp Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: enable lqr Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: enable mssfixup Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set authname [EMAIL PROTECTED] Aug 14 16:44:28 proxy ppp[23798]: tun1: Command: pppoe: set authkey ******** Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: PPP Started (ddial mode). Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: bundle: Establish Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: closed -> opening Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: Connected! Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: opening -> dial Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: dial -> carrier Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: carrier -> login Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: login -> lcp Aug 14 16:44:28 proxy ppp[23119]: tun1: LCP: FSM: Using "deflink" as a transport Aug 14 16:44:28 proxy ppp[23119]: tun1: LCP: deflink: State change Initial --> Closed Aug 14 16:44:28 proxy ppp[23119]: tun1: LCP: deflink: State change Closed --> Stopped Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: read (0): Connection reset by peer Aug 14 16:44:28 proxy ppp[23119]: tun1: LCP: deflink: State change Stopped --> Closed Aug 14 16:44:28 proxy ppp[23119]: tun1: LCP: deflink: State change Closed --> Initial Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: Disconnected! Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: lcp -> logout Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: logout -> hangup Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: Disconnected! Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: Connect time: 0 secs: 45 octets in, 0 octets out Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: 4 packets in, 0 packets out Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: total 45 bytes/sec, peak 0 bytes/sec on Thu Aug 14 16:44:28 2008 Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: HUPing 28945 Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: hangup -> opening Aug 14 16:44:28 proxy ppp[23119]: tun1: Phase: deflink: Enter pause (30) for redialing. Aug 14 16:44:28 proxy ppp[23119]: tun1: Chat: deflink: Reconnect try 1 of 10000 What's wrong? Thanks for some help. Dongsheng Song
