fxp0: warning: SCB timed out (x 3)
fxp0: config command timeout
----- Forwarded message from Hari <[EMAIL PROTECTED]> -----
From: Hari <[EMAIL PROTECTED]>
Date: Fri, 25 Jul 2008 09:46:28 +0900
To: Stuart Henderson <[EMAIL PROTECTED]>
Subject: Re: DHCP question
On Thu, Jul 24, 2008 at 7:31 PM, Stuart Henderson <[EMAIL PROTECTED]> wrote:
> misc@ doesn't take attachments, those need to be inline
Thought as much...apologies. Here are the dmesgs for the virgin system.
bsd.rd:
<begin>
OpenBSD 4.4-beta (RAMDISK_CD) #824: Tue Jul 22 18:29:32 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR
real mem = 526516224 (502MB)
avail mem = 502517760 (479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/02/05, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (62 entries)
bios0: vendor Dell Inc. version "A01" date 11/02/2005
bios0: Dell Inc. Dell DC051
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xa800! 0xca800/0x1800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915G Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82801FB HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: irq 11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 9
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 4
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 3
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 3
fxp0 at pci3 dev 8 function 0 "Intel 82801FB LAN" rev 0x04, i82562:
irq 10, address 00:16:76:13:ad:54
inphy0 at fxp0 phy 1: i82562G 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDRWDVD TS-H492C, DE02> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA1>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f7fd netmask f7fd ttymask ffff
rd0: fixed, 3800 blocks
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x0461 USB
Optical Mouse" rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub1 port 2 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/2.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub0 port 5 configuration 1 interface 0 "BUFFALO USB Flash
Disk" rev 2.00/40.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <BUFFALO, USB Flash Disk, 4000> SCSI0
0/direct removable
sd0: 1920MB, 244 cyl, 255 head, 63 sec, 512 bytes/sec, 3932160 sec total
<end>
bsd:
<begin>
OpenBSD 4.4-beta (GENERIC) #985: Tue Jul 22 18:14:49 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR
real mem = 526516224 (502MB)
avail mem = 500867072 (477MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/02/05, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (62 entries)
bios0: vendor Dell Inc. version "A01" date 11/02/2005
bios0: Dell Inc. Dell DC051
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xa800! 0xca800/0x1800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915G Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xc0000000, size 0x10000000
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: irq 11
azalia0: codec[s]: Sigmatel STAC9200
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: irq 11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 9
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 4
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 3
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 3
fxp0 at pci3 dev 8 function 0 "Intel 82801FB LAN" rev 0x04, i82562:
irq 10, address 00:16:76:13:ad:54
inphy0 at fxp0 phy 1: i82562G 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDRWDVD TS-H492C, DE02> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA1>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 256MB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f7fd netmask f7fd ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Primax
Electronics USB Optical Mouse" rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/2.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: config command timeout
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: config command timeout
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: config command timeout
<end>
Hari
----- End forwarded message -----
