Hello.
When starting X server I'm getting following message:
xauth: creating new authority file /home/raff/.serverauth.6489
xauth: (stdin):2: unknown command "f7dc6384bd24019ab5620c73611c6135"
xauth: (stdin):3: unknown command "f7dc6384bd24019ab5620c73611c6135"
xauth: (stdin):4: unknown command "f7dc6384bd24019ab5620c73611c6135"
Server starts and X are running fine, but what can cause those messages?
dmesg:
OpenBSD 4.4-beta (GENERIC) #977: Mon Jul 14 20:20:57 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.71
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (767MB)
avail mem = 769478656 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/10/04, BIOS32 rev. 0 @ 0xf9e80, SMBIOS
rev. 2.3 @ 0xf0120 (37 entries)
bios0: vendor Award Software International, Inc. version "F4" date 08/10/2004
bios0: Gigabyte Technology Co., Ltd. GA-7VAX
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc9c4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc910/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 5 7 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: v3, aperture at 0xd0000000, size 0x10000000
"ATI Radeon 9200 Sec" rev 0x01 at pci1 dev 0 function 1 not configured
ral0 at pci0 dev 11 function 0 "Ralink RT2560" rev 0x01: irq 10, address
00:13:d3:73:7a:38
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 7
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 11
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
maxtmp0 at iic0 addr 0x4c: lm90
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8520B, 1.04> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 11
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
rl0 at pci0 dev 19 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:20:ed:52:04:db
rlphy0 at rl0 phy 0: RTL internal PHY
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8705F rev 0x02, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ffed netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech HID compliant
keyboard" rev 1.10/1.80 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech HID compliant
keyboard" rev 1.10/1.80 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
uhidev2 at uhub1 port 2 configuration 1 interface 0 "Logitech USB RECEIVER" rev
1.10/25.10 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
xorg.conf:
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/local/lib/X11/fonts/ghostscript/"
FontPath "/usr/local/lib/X11/fonts/terminus"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "Emulate3Buttons"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "eizo"
HorizSync 31-64
VertRefresh 59-61
Option "DPMS"
EndSection
Section "Device"
Identifier "radeon"
Driver "radeon"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "radeon"
Monitor "eizo"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
xinitrc:
#!/bin/sh
# $Xorg: xinitrc.cpp,v 1.3 2000/08/17 19:54:30 cpqbld Exp $
# $OpenBSD: xinitrc.cpp,v 1.4 2008/06/18 20:31:51 matthieu Exp $
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# if we have private ssh key(s), start ssh-agent and add the key(s)
id1=$HOME/.ssh/identity
id2=$HOME/.ssh/id_dsa
id3=$HOME/.ssh/id_rsa
if [ -x /usr/bin/ssh-agent ] && [ -f $id1 -o -f $id2 -o -f $id3 ];
then
eval `ssh-agent -s`
ssh-add < /dev/null
fi
xset b 100 1500 25
LC_ALL=pl_PL.ISO8859-2
LANG=pl_PL.ISO8859-2
PERL_BADLANG=0
export PERL_BADLANG LC_ALL
/usr/X11R6/bin/cwm
if [ "$SSH_AGENT_PID" ]; then
ssh-add -D < /dev/null
eval `ssh-agent -s -k`
fi
Regards.
--
Rafal Brodewicz
