Hello.
I can't blank cd on i386, and getting: "cdio: The media doesn't support
blanking" message.
Same cd blanks with no problem on amd64 laptop. Don't know if it's cd drive or
platform issue. I don't have other drive to test it.
I'm using 4.4 snapshots on both machines.
dmesg:
OpenBSD 4.3-current (GENERIC) #1: Thu Jul 3 22:54:30 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.71
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (767MB)
avail mem = 769474560 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/10/04, BIOS32 rev. 0 @ 0xf9e80, SMBIOS
rev. 2.3 @ 0xf0120 (37 entries)
bios0: vendor Award Software International, Inc. version "F4" date 08/10/2004
bios0: Gigabyte Technology Co., Ltd. GA-7VAX
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB6(S3) USB7(S3) USB8(S3)
USB9(S3) UAR1(S5) LPT1(S5) ECP1(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: v3, aperture at 0xd0000000, size 0x10000000
"ATI Radeon 9200 Sec" rev 0x01 at pci1 dev 0 function 1 not configured
ral0 at pci0 dev 11 function 0 "Ralink RT2560" rev 0x01: irq 10, address
00:13:d3:73:7a:38
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 7
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 11
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
maxtmp0 at iic0 addr 0x4c: lm90
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8520B, 1.03> ATAPI 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 11
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
rl0 at pci0 dev 19 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:20:ed:52:04:db
rlphy0 at rl0 phy 0: RTL internal PHY
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8705F rev 0x02, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fded netmask fded ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech HID compliant
keyboard" rev 1.10/1.80 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech HID compliant
keyboard" rev 1.10/1.80 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
umass0 at uhub0 port 3 configuration 1 interface 0 "USBest Technology USB Mass
Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <512MB, USB2.0FlashDrive, A4> SCSI2 0/direct
removable
sd0: 492MB, 62 cyl, 255 head, 63 sec, 512 bytes/sec, 1007616 sec total
sd0 detached
scsibus1 detached
umass0 detached
uhidev2 at uhub1 port 2 configuration 1 interface 0 "Logitech USB RECEIVER" rev
1.10/25.10 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
