On 6/9/08, Per-Olov Sjvholm <[EMAIL PROTECTED]> wrote: > On Thursday 05 June 2008 15.42.37 you wrote: > > On 2008-06-05, Per-Olov Sjvholm <[EMAIL PROTECTED]> wrote: > > > I did an upgrade (read reinstall) last week on a Dell PE830 server from > > > OpenBSD 4.2 to 4.3. It is a 4.3 RELEASE std install, but a stable update > > > of kernel and userland from May 29. > > > > > > The sensors worked ok in 4.2. In 4.3 it looks like this where the sensor > > > info is null.. > > > > They were probably from ipmi before, this was knocked out of > > GENERIC until bad interactions with acpi on some machine are fixed. > > See http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/i386/conf/GENERIC > > r1.589. > > > Ahhhh, I see... > > dmesg says.. > ipmi at mainbus0 not configured > and.. > adt0 at iic0 addr 0x2e: lm96000 rev 0x68 > > > So the sensors show up but are unusable and shows zero? So I should not expect > these to be usable in 4.3 even with a stable update? Do I have to track the > cvs tree and go to current when fixed if I want these sensors? > > Or fix the problem myself ;-)
or just config -ef /bsd and turn ipmi back on.
