Hello,
I'm attempting to get a Western Digital My Book Studio Edition II
working with my OpenBSD 4.2 machine. The drive is formatted for FAT32
and functions while the machine is booted into Windows.
I have it attached via USB, but when I attempt to mount the drive, it
fails:
% sudo mount -t msdos /dev/sd0i /mnt
mount_msdos: /dev/sd0i on /mnt: Cannot allocate memory
Similarly, fdisk and disklabel both fail.
% fdisk sd0
fdisk: DIOCGDINFO: Input/output error
fdisk: Can't get disk geometry, please use [-chs] to specify.
% fdisk -c 16383 -h 16 -s 63 sd0
fdisk: DIOCGDINFO: Input/output error
Disk: sd0 geometry: 16383/16/63 [16514064 Sectors]
Offset: 0 Signature: 0x0
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
% disklabel sd0
disklabel: ioctl DIOCGDINFO: Input/output error
Does anyone have any ideas on how I can get this working? I've included
a dmesg and a usbdevs bellow.
Many thanks,
-Larry
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.70GHz ("GenuineIntel" 686-class) 600 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 804220928 (766MB)
avail mem = 769486848 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/02/06, BIOS32 rev. 0 @ 0xfd750, SMBIOS
rev. 2.33 @ 0xe0010 (61 entries)
bios0: vendor IBM version "1RETDPWW (3.21 )" date 06/02/2006
bios0: IBM 2378RRU
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 97%
apm0: AC off, battery charge high, estimated 1:22 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 600 MHz (988 mV): speeds: 1700, 1400, 1200, 1000, 800,
600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11,
address 00:11:25:86:54:f3
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
address 00:12:f0:12:94:ba
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA755yDVD/CDRW, 1.72> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
iwi0: fatal firmware error
umass0 at uhub0 port 3 configuration 1 interface 0
umass0: Western Digital My Book, rev 2.00/10.09, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <WD, My Book, 1009> SCSI2 0/direct fixed
sd0: drive offline
ses0 at scsibus1 targ 1 lun 1: <WD, My Book Device, 1009> SCSI2 13/enclosure
services fixed
ses0: unable to read enclosure configuration
uhidev0 at uhub0 port 3 configuration 1 interface 1
uhidev0: Western Digital My Book, rev 2.00/10.09, addr 2, iclass 3/0
uhidev0: 33 report ids
uhid0 at uhidev0 reportid 1: input=1, output=2, feature=0
uhid1 at uhidev0 reportid 2: input=4, output=4, feature=0
uhid2 at uhidev0 reportid 3: input=1, output=0, feature=0
uhid3 at uhidev0 reportid 16: input=20, output=0, feature=0
uhid4 at uhidev0 reportid 17: input=2, output=0, feature=0
uhid5 at uhidev0 reportid 32: input=20, output=0, feature=0
uhid6 at uhidev0 reportid 33: input=2, output=0, feature=0
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 addr 2: high speed, self powered, config 1, My Book(0x1105), Western
Digital(0x1058), rev 10.09
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 100 mA, config 1, Biometric
Coprocessor(0x2016), STMicroelectronics(0x0483), rev 0.01
