Hi,
Product Name: HP Compaq dc7700p Small Form Factor
ME Firmware Version: 2.1.3.1031
After a successfull 4.3 install, followed by a halt and reboot the system
will panic:
.......
panic: aml_die aml_setbufinit:988
Stopped at Debugger+0x4: leave
Debugger(d078aad0,d1919f90,d092c568,8,160) at Debugger+0x4
panic(d077e965,d077ea94,3dc,d1930c10,d1900104) at panic+0663
.......
However, after a boot -c, disable acpi, diasable apm, quit will boot
successfully (see below), but again, after a (new) reboot, the system
panics again.
As well, complaining about an incompatible ICU (Inteligent Controller Unit?)
vendor and product:
......
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe4c0/288 (16 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2814
pcibios0: Warning, unable to fix up PCI interrupt routing
......
How can I permanently disable acpi and apm in kernel?
Who is the ICU vendor 0x8086(?) and which product is 0x2814(?)
mufurcz
Last login: Fri Jun 6 22:32:12 2008
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
Terminal type? [vt100]
# dmesg
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1047822336 (999MB)
avail mem = 1005096960 (958MB)
User Kernel Config
UKC> enable acpi
417 acpi0 already enabled
UKC> disable acpi
417 acpi0 disabled
UKC> disable apm
321 apm0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/13/07, BIOS32 rev. 0 @ 0xea0a0,
SMBIOS rev. 2.4 @ 0xeb960 (67 entries)
bios0: vendor Hewlett-Packard version "786E1 v02.10" date 04/13/2007
bios0: Hewlett-Packard HP Compaq dc7700p Small Form Factor
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xea0a0/0x5de0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe4c0/288 (16 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2814
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xe7600/0x8a00!
cpu0 at mainbus0
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82Q965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q965 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using irq 10 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q965 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: irq 11,
address 00:1c:c4:71:52:01
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: irq 5
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: irq 5
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02
pci1 at ppb0 bus 32
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: irq 5
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: irq 5
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: irq 5
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci2 at ppb1 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380815AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM TS-H353A, BA08> SCSI0
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask e76d netmask ef6d ttymask ffef
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech Optical USB
Mouse" rev 2.00/3.40 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
#
