Hi Misc@,
Since I got an Gigabyte motherboard, and installed 4.2-Stable and now
4.3-Stable, I cannot get re(4) (Dlink H/W) working with VLANs. When I use
VLAN on them, I can ping it, but when I tried to ssh or other services, it
wont work. We use 100mbps link on it.
So, maybe anyone on the Misc@ have the same problem and maybe there are
solution to this.
Thanks in advance,
Kind Regards,
--
insandotpraja(at)gmaildotcom
OpenBSD 4.3 (GENERIC.MP) #1582: Wed Mar 12 11:16:45 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1064890368 (1015MB)
avail mem = 1022169088 (974MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (33 entries)
bios0: vendor Award Software International, Inc. version "F2" date
04/25/2007
bios0: Gigabyte Technology Co., Ltd. 945GCM-S2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET MCFG APIC
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) UAR1(S1) UAR2(S1) USB0(S1) USB1(S1) USB2(
S1) USB3(S1) USBE(S1) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 2.66GHz, 2679.87 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.66GHz, 2679.55 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR,NXE,LONG
cpu1: 1MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
agp0 at pchb0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic
2 int 16 (irq 5)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic
2 int 16 (irq 5)
azalia0: codec[s]: Realtek/0x0888
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 9)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
18 (irq 6)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci1 at ppb0 bus 1
fxp0 at pci1 dev 0 function 0 "Intel 8255x" rev 0x02, i82557: apic 2 int
20 (irq 12), address 00:04:ac:56:97:a2
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
ukphy0 at fxp0 phy 2: Generic IEEE 802.3u media interface, rev. 3: OUI
0x28a5c0, model 0x0008
fxp1 at pci1 dev 1 function 0 "Intel 8255x" rev 0x05, i82558: apic 2 int
19 (irq 11), address 00:08:c7:aa:ee:0c
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
re0 at pci1 dev 5 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 2 int 21 (irq 10), address 00:1a:4d:6f:
b4:52
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to com
patibility
wd0 at pciide0 channel 0 drive 0: <ST380215AS>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT8718F rev 0x02
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
PCI DUMP:
1:5:0: Realtek 8169SC
0x0000: Vendor ID: 10ec Product ID: 8167
0x0004: Command: 0007 Status ID: 02b0
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 10
0x000c: BIST: 00 Header Type: 00 Latency Timer: 40 Cache Line
Size: 08
0x0010: 0000a801
0x0014: d1200000
0x0018: 00000000
0x001c: 00000000
0x0020: 00000000
0x0024: 00000000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1458 Product ID: e000
0x0030: Expansion ROM Base Address: 00000000
0x0034: Capabilities Pointer: dc
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 20 Max Lat: 40
