OpenBSD 4.3-current (GENERIC) #853: Fri May 2 04:37:23 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
Hardware Info:
ral0 at pci0 dev 9 function 0 "Ralink RT2561S" rev 0x00: irq 5,
address 00:0e:2e:xx:xx:xx
ral0: MAC/BBP RT2561C, RF RT2527
# ifconfig ral0
ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:2e:xx:xx:xx
groups: wlan egress
media: IEEE802.11 autoselect hostap (autoselect mode 11b hostap)
status: active
ieee80211: nwid obsd_wpa chan 8 bssid 00:0e:2e:xx:xx:xx wpapsk
<not displayed> wpaprotos wpa1,wpa2 wpaakms psk,802.1x wpaciphers
tkip,ccmp wpagroupcipher tkip 100dBm
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
/etc/hostname.ral0
inet 192.168.1.1 255.255.255.0 NONE media autoselect \
mediaopt hostap nwid obsd_wpa chan 8 \
wpa wpapsk <not displayed>
I have tried connect from a Mac running Leopard, but it is always
saying "Connection Timeout" after input of the pass-phrase. I have
tried to connect from a Windows XP box manually selecting WPA-PSK and
tried both (TKIP and AES), but was still unable to connect. It does
seem like it is getting connected, since it is saying acquiring
network address, but it just cycles through acquiring network and not
connected. I tried to look at the tcpdump but the packets it prints
are all in hexadecimal.
Jonathan
