Dear all,
I did the first of our upgrades, using serial port/bsd.rd.
Did this a few times before, but this time was different, and locked out
of the serial port!?
My first observation was with "You also need to use vipw(8) to edit the
password files and your favorite editor to change ". I couldn't for my
life get this going properly, [I do everything with vi, so vi is not the
problem].
Searching for hoststat brought me to a different line, manually editing
screwed up the display. I sftp-ed to the box, and everything was fine.
After the next reboot (bsd.mp), the serial console showed everything
starting, all daemons, until date. Only the logon froze completely.
I was afraid, the whole machine (I have no access) had panicked, but no,
sftp was fine and everything else.
Now everything looks fine, only serial console is not working.
What I get (from another OpenBSD 4.2 with minicom) is
Welcome to minicom 2.2
OPTIONS: I18n
Compiled on Aug 16 2007, 04:17:45.
Port /dev/tty00
Press CTRL-A Z for help on special keys
and then everything freezes, Ctrl-A-Z -> X gets me out properly.
I wonder what has gone wrong ...
Here is the dmesg of the upgraded target:
[Only strange thing: before it would not use the hyperthreading, now it
does, on its own, therefore it shows 4 CPUs]
OpenBSD 4.3 (GENERIC.MP) #1582: Wed Mar 12 11:16:45 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2147033088 (2047MB)
avail mem = 2073280512 (1977MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (78 entries)
bios0: vendor HP version "D19" date 02/15/2006
bios0: HP ProLiant ML350 G4p
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SPCR MCFG APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.51 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu1: 2MB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu2: 2MB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu3: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9 pa 0xfec10000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0 apid 10 pa 0xfec80000, version 20, 24 pins
ioapic3 at mainbus0 apid 11 pa 0xfec80400, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 2 (IPXB)
acpiprt2 at acpi0: bus 6 (PCXA)
acpiprt3 at acpi0: bus 9 (PCXB)
acpiprt4 at acpi0: bus 5 (PTA0)
acpiprt5 at acpi0: bus 13 (PTB0)
acpiprt6 at acpi0: bus 16 (PTC0)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 5
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 6
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 9
rl0 at pci3 dev 2 function 0 "D-Link Systems 530TX+" rev 0x10: apic 11
int 0 (irq 3), address 00:11:95:5e:50:ba
rlphy0 at rl0 phy 0: RTL internal PHY
ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c
pci4 at ppb3 bus 13
ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c
pci5 at ppb4 bus 16
ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci6 at ppb5 bus 2
mpi0 at pci6 dev 3 function 0 "Symbios Logic 53c1030" rev 0x08: apic 9
int 0 (irq 10)
scsibus0 at mpi0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, BF1468A4CC, HPB5> SCSI3 0/direct
fixed
sd0: 140014MB, 50824 cyl, 8 head, 705 sec, 512 bytes/sec, 286749488 sec
total
sd1 at scsibus0 targ 2 lun 0: <COMPAQ, BF03688284, HPB3> SCSI3 0/direct
fixed
sd1: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132000 sec total
mpi0: target 0 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpi0: target 2 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpi1 at pci6 dev 3 function 1 "Symbios Logic 53c1030" rev 0x08: apic 9
int 1 (irq 10)
scsibus1 at mpi1: 16 targets
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int
16 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 int
19 (irq 5)
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int
23 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci7 at ppb6 bus 1
bge0 at pci7 dev 2 function 0 "Broadcom BCM5705K" rev 0x03, BCM5705 A3
(0x3003): apic 8 int 17 (irq 11), address 00:15:60:0b:65:60
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x01 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci7 dev 4 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8482B, 2.09> SCSI0
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
ugen0 at uhub2 port 1 "American Power Conversion Back-UPS RS 1000
FW:7.g8 .I USB FW:g8" rev 1.10/1.06 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Thanks for any hint,
Uwe
