Hello, I just upgraded my Alix2c3 to 4.3-Release, installed via PXE-Boot and rebooted after the install completed.
The machine doesn't successfully boot now and hangs at this one: >glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, 32-bit >3579 545Hz timer excerpt from dmesg (it's captured via hypterminal and scrolling is broken so it's not everything) pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xe0000/0xb000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00 :0d:b9:12:6b:04 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 0 0:0d:b9:12:6b:05 ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 0 0:0d:b9:12:6b:06 ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 ath0 at pci0 dev 12 function 0 "Atheros AR2413" rev 0x01: irq 9 ath0: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 00:1d:0f:af:98:88 glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, 32-bit 3579 545Hz timer
