Hello misc.
I use 4.3-current on an asustek laptop. For use acpi, I have to disable
apm (via UKC). Powerdown works perfectly with GENERIC and apm. However,
it does not work with GENERIC and acpi (I have to disable apm for acpi
works).
With GENERIC.MP, powerdown does not work.
When I say powerdown does not work, it means the machine always
reboot... When I do a powerdown, the machine halt... and reboot,
whitout any messages. It's a little problem for me, if I can't halt my
machine.
See my dmesg:
OpenBSD 4.3-current (GENERIC) #0: Fri Apr 25 22:33:12 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
real mem = 1073115136 (1023MB) avail mem = 1029562368 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/27/06, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.3 @ 0xfc660 (35 entries) bios0: vendor American
Megatrends Inc. version "A6JCMAS.219" date 07/27/2006 bios0: ASUSTeK
Computer Inc. A6JC apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG BOOT OEMB
acpi0: wakeup devices P0P2(S0) P0P1(S0) CBS0(S0) P394(S0) USB0(S0)
USB1(S0) EUSB(S0) MC97(S0) P0P4(S0) P0P5(S0) P0P6(S0) P0P7(S0) P0P8(S0)
P0P9(S0) HDAC(S0) SLPB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 4 (P0P1)
acpiprt3 at acpi0: bus 2 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus -1 (P0P6)
acpiprt6 at acpi0: bus 3 (P0P7)
acpiprt7 at acpi0: bus -1 (P0P8)
acpiprt8 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpitz0: THRM: failed to read _AC0
acpitz0: THRM: failed to read _PSV
acpiac0 at acpi0: AC unit in unknown state
acpibat0 at acpi0: BAT0 serial type LIon oem "ASUSTEK"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xf000
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2c06000613
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: no integrated graphics
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
irq 3 azalia0: codec[s]: Realtek ALC880, Motorola/0x3055, using Realtek
ALC880 audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 11
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2
(0x3800), irq 11, address 00:18:f3:5b:f6:31 rgephy0 at re0 phy 7:
RTL8169S/8110S PHY, rev. 2 ppb2 at pci0 dev 28 function 3 "Intel
82801GB PCIE" rev 0x02: irq 5 pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
irq 5, MoW2, address 00:13:02:dd:05:5f uhci0 at pci0 dev 29 function 0
"Intel 82801GB USB" rev 0x02: irq 7 uhci1 at pci0 dev 29 function 1
"Intel 82801GB USB" rev 0x02: irq 5 uhci2 at pci0 dev 29 function 2
"Intel 82801GB USB" rev 0x02: irq 4 uhci3 at pci0 dev 29 function 3
"Intel 82801GB USB" rev 0x02: irq 6 ehci0 at pci0 dev 29 function 7
"Intel 82801GB USB" rev 0x02: irq 7 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 4
cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb3: irq 3
"Ricoh 5C552 Firewire" rev 0x08 at pci4 dev 1 function 1 not configured
sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x17: irq 5
sdmmc0 at sdhc0
"Ricoh 5C592 Memory Stick" rev 0x08 at pci4 dev 1 function 3 not
configured cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev
0x02: DMA, channel 0 configured to compatibility, channel 1 configured
to compatibility wd0 at pciide0 channel 0 drive 0: <HTS541010G9AT00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors atapiscsi0 at
pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L532U, AS04> ATAPI
5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e5fd netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
ugen0 at uhub0 port 7 "Syntek USB2.0" rev 2.00/0.05 addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech Optical
USB Mouse" rev 2.00/3.40 addr 2 uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Battery charge does not work:
hw.sensors.acpibat0.volt0=14.80 VDC (voltage)
hw.sensors.acpibat0.volt1=unknown (current voltage), UNKNOWN
hw.sensors.acpibat0.amphour0=6.00 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.60 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.30 Ah (low capacity)
hw.sensors.acpibat0.amphour3=unknown (remaining capacity), UNKNOWN
hw.sensors.acpibat0.raw0=unknown (battery unknown), UNKNOWN
hw.sensors.acpibat0.raw1=unknown (rate), UNKNOWN
And on the boot, I see:
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
: no critical temperature defined
Is it dangerous?
On the other hand, to shutdown I try the hack in sysctl.conf
(machdep.apmhalt) but it does not work (I think it is normal, because I
do not use apm).
For more informations, contact-me.
Thanks.
Regards,
- Nicolas.
