Hi all,
I usually use wifi to connect so never noticed. But today I have to
use the wire to connect to the network and doing some remote tests and
I get slow results. So I did a ping to differerent server like yahoo
and get this :
PING yahoo.fr (217.12.6.29): 56 data bytes
64 bytes from 217.12.6.29: icmp_seq=0 ttl=247 time=182.585 ms
64 bytes from 217.12.6.29: icmp_seq=1 ttl=247 time=157.585 ms
64 bytes from 217.12.6.29: icmp_seq=2 ttl=247 time=86.655 ms
64 bytes from 217.12.6.29: icmp_seq=3 ttl=247 time=160.425 ms
64 bytes from 217.12.6.29: icmp_seq=4 ttl=247 time=150.316 ms
64 bytes from 217.12.6.29: icmp_seq=5 ttl=247 time=140.267 ms
64 bytes from 217.12.6.29: icmp_seq=6 ttl=247 time=130.263 ms
64 bytes from 217.12.6.29: icmp_seq=7 ttl=247 time=85.141 ms
64 bytes from 217.12.6.29: icmp_seq=8 ttl=247 time=110.447 ms
64 bytes from 217.12.6.29: icmp_seq=9 ttl=247 time=100.354 ms
64 bytes from 217.12.6.29: icmp_seq=10 ttl=247 time=90.343 ms
64 bytes from 217.12.6.29: icmp_seq=11 ttl=247 time=897.197 ms
64 bytes from 217.12.6.29: icmp_seq=12 ttl=247 time=1010.535 ms
64 bytes from 217.12.6.29: icmp_seq=13 ttl=247 time=850.532 ms
64 bytes from 217.12.6.29: icmp_seq=14 ttl=247 time=1010.333 ms
64 bytes from 217.12.6.29: icmp_seq=15 ttl=247 time=84.840 ms
64 bytes from 217.12.6.29: icmp_seq=16 ttl=247 time=1010.139 ms
64 bytes from 217.12.6.29: icmp_seq=17 ttl=247 time=1010.541 ms
64 bytes from 217.12.6.29: icmp_seq=18 ttl=247 time=1010.446 ms
64 bytes from 217.12.6.29: icmp_seq=19 ttl=247 time=816.722 ms
64 bytes from 217.12.6.29: icmp_seq=20 ttl=247 time=805.865 ms
64 bytes from 217.12.6.29: icmp_seq=21 ttl=247 time=591.387 ms
64 bytes from 217.12.6.29: icmp_seq=22 ttl=247 time=787.180 ms
--- yahoo.fr ping statistics ---
24 packets transmitted, 23 packets received, 4.2% packet loss
round-trip min/avg/max/std-dev = 84.840/490.439/1010.541/394.641 ms
enlil% sudo route delete default
This isn't an hardware problem, I tried with an ubuntu livecd and
evrything is ok. I can ping to yahoo (in this case) and have response
time in 85ms.
If use wpi(4) time response is 85ms, so there is no problem. Does
anyone has such problem too ?
- benont
OpenBSD 4.3-current (GENERIC.MP) #628: Fri Apr 11 15:31:04 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class) 1.67
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063677952 (1014MB)
avail mem = 1020375040 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, BIOS32 rev. 0 @ 0xfd690, SMBIOS
rev. 2.4 @ 0xe0010 (67 entries)
bios0: vendor LENOVO version "7BETD1WW (2.12 )" date 07/26/2007
bios0: LENOVO 17025PG
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT
SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class) 1.67
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T5247" serial 538 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit online
acpidock at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000 0xdc000/0x4000!
0xe0000/0x10000!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a1d06000a1d
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1667 MHz (1164 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
17 (irq 11)
azalia0: codec[s]: Analog Devices/0x1981, Conexant/0x2bfa, using Analog
Devices/0x1981
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
(irq 11)
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2 int
16 (irq 11), address 00:16:d3:c0:22:c8
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
(irq 11)
pci2 at ppb1 bus 3
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int
17 (irq 11), MoW2, address 00:1c:bf:6e:c5:c8
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
(irq 11)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int 23
(irq 11)
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 2 int 16
(irq 11)
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 2 int 18
(irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 2 int 16
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54161, SB3I> SCSI3 0/direct fixed
sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 23
(irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01
addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
ugen1 at uhub4 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 3
