The installer can't mount the cd to read the files from it. I'm using a
recent install43.iso. I'll try to use ftp for the install sets, but it would
be nice if I could do it all from the CD.
Here is what I get if I try to mount the CD
cd0(ahci0:1:0): Check Condition (error 0x70) on opcode 0x8
SENSE KEY: Illegal Request
cd0(ahci0:1:0): Check Condition (error 0x70) on opcode 0x8
SENSE KEY: Illegal Request
cd0(ahci0:1:0): Check Condition (error 0x70) on opcode 0x8
SENSE KEY: Illegal Request
OpenBSD 4.3-current (RAMDISK_CD) #1438: Sun Apr 20 17:12:21 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 3484012544 (3322MB)
avail mem = 3370033152 (3213MB)
RTC BIOS diagnostic error 11<memory_size>
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (80 entries)
bios0: vendor Dell Inc. version "A09" date 03/11/2008
bios0: Dell Inc. OptiPlex 755
acpi0 at bios0: rev 2, can't enable ACPI
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz, 3159.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82Q35 PCIE" rev 0x02: irq 11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 2400 XT" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using irq 9 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: irq 3, address
00:1e:4f:c4:d6:41
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 11
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 5
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: irq 11
pci2 at ppb1 bus 2
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 5
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 9
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 10
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci3 at ppb2 bus 3
"Intel 82801IO LPC" rev 0x02 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: irq 9, AHCI 1.2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD1600JS-75N, 10.0> SCSI3 0/direct
fixed
sd0: 152587MB, 19452 cyl, 255 head, 63 sec, 512 bytes/sec, 312500000 sec
total
cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-H653B, D300> SCSI0 5/cdrom
removable
"Intel 82801I SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 4480 blocks
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Logitech Optical USB
Mouse" rev 2.00/3.40 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub6 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard"
rev 1.10/2.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
root on rd0a swap on rd0b dump on rd0b
