Hey guys,
I have a pair of firewalls running fully patched OpenBSD 4.2. These are
DL140s and i have the optional quad gigabit ethernet card in them.
Now, whenever I use the GENERIC kernel, all is well. However, if I
switch to the GENERIC.MP kernel I lose connectivity and get em0:
watchdog timeout resetting messages.
Does anyone know what is causing this and what I can do about it?
Thanks in advance
Dmesg:
OpenBSD 4.2 (GENERIC) #0: Mon Apr 14 14:01:40 BST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem = 2146054144 (2046MB)
avail mem = 2067517440 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd361,
SMBIOS rev. 2.31 @ 0xdc010 (57 entries)
bios0: vendor HP version "O08 " date 08/13/2007
bios0: HP ProLiant DL140 G3
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd360/0xca0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/512 (30 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #24 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x4000!
0xcd000/0x1600 0xce800/0x1600 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x31
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev
0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x8018 rev
0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
10, address 00:1c:c4:48:e9:01
em1 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
9, address 00:1c:c4:48:e9:00
ppb5 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x8018 rev
0x0e
pci6 at ppb5 bus 6
em2 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
7, address 00:1c:c4:48:e9:03
em3 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
11, address 00:1c:c4:48:e9:02
ppb6 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci7 at ppb6 bus 7
ppb7 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
pci8 at ppb7 bus 8
ppb8 at pci0 dev 4 function 0 "Intel 5000X PCIE" rev 0x31
pci9 at ppb8 bus 12
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb4
pci10 at ppb9 bus 13
ppb10 at pci10 dev 4 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci11 at ppb10 bus 14
ciss0 at pci10 dev 8 function 0 "Hewlett-Packard Smart Array" rev 0x00:
irq 11
ciss0: 0 LDs, HW rev 0, FW 1.66/1.66
scsibus0 at ciss0: 8 targets
ppb11 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
pci12 at ppb11 bus 15
ppb12 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
pci13 at ppb12 bus 16
ppb13 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
pci14 at ppb13 bus 17
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
ppb14 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci15 at ppb14 bus 22
bge0 at pci15 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 11, address 00:1e:0b:84:9f:74
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb15 at pci0 dev 28 function 1 "Intel 6321ESB PCIE" rev 0x09
pci16 at ppb15 bus 23
bge1 at pci16 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 7, address 00:1e:0b:84:9f:75
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb16 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci17 at ppb16 bus 24
vga1 at pci17 dev 2 function 0 "Matrox MGA G200e (ServerEngines)" rev
0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DW-224E-V, C.CA> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <FB080C4080>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <FB080C4080>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: irq 10
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask fd6d netmask ffed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
pckbcintr: no dev for slot 1
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
-- joe.
I was showing Alan a presentation and Messenger kept on popping up
with stupid messages from Paul.
